Journals / Bitlis Eren Üniversitesi Fen Bilimleri Dergisi / 2017 / Cilt: 6 - Sayı: 1

Experimental Investigation of the Using Pure Pumice Stone In Emission Control Applications

Emisyon Kontrol Uygulamalarında Saf Pomza Taşı Kullanabilirliğinin Deneysel Olarak Araştırılması

Pages
31–41
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results showed that better results can be obtained by supporting pumice material by oxidizing and NOX reductive metals and noble metals

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the usability of pumice stone as catalyst for the exhaust emissions of a single cylinder diesel engine, and its effects on the exhaust emissions are investigated experimentally.
📊
Key Findings & Data:In this study, the performance of pumice material in filtering the pollutant and greenhouse gas emissions is investigated and the results are presented graphically.
💡
Conclusion & Impact:Results showed that better results can be obtained by supporting pumice material by oxidizing and NOX reductive metals and noble metals
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the usability of pumice stone as catalyst for the exhaust emissions of a single cylinder diesel engine, and its effects on the exhaust emissions are investigated experimentally. The engine is tested under fully open throttle and various engine load conditions. In this study, the performance of pumice material in filtering the pollutant and greenhouse gas emissions is investigated and the results are presented graphically. Change in the harmful gas emissions exhausted from the diesel engine is observed. While 49%, 48%, 49% and 26% reductions in HC, CO, NOX and soot emissions are achieved by using standard catalyst, using pumice material provided reductions in these emissions as 19%, 6%, 2-3%, 12-44% respectively. Results showed that better results can be obtained by supporting pumice material by oxidizing and NOX reductive metals and noble metals

Özet

Bu çalışmada, tek silindirli bir dizel motorda egzoz emisyonlarına katalizör olarak saf pomza taşının kullanılabilirliği ve egzoz emisyonlarına etkileri deneysel olarak incelenmiştir. Egzoz emisyon karakteristiklerini belirlemek amacıyla motor tam gaz konumunda, değişik motor yüklerinde teste tabi tutulmuştur. Yapılan çalışma ile atmosferi kirleten ve sera gazı etkisi gösteren emisyonları filtre etmede pomza madeninin etkisi araştırılmış olup sonuçlar grafik olarak verilmiştir. Dizel motordan kaynaklanan zararlı gaz emisyonlarındaki değişim izlenmiştir. Elde edilen sonuçlarda standart katalizör kullanıldığında HC, CO, NOX ve is emisyonlarında sırası ile %49, %48, %49 ve %26 oranında bir azalma olduğu, katalizör olarak pomza kullanımında ise, %19, %6, %2-3 ve %12-44 oranında bir azalma olduğu görülmüştür. Bu sonuçlar neticesinde pomza madeni oksitleyici ve NOXindirgeyici özelliğe sahip metal ve soy metaller ile desteklenmesi ile daha iyi sonuçlar elde edilebileceği görülmüştür

🔖

Cite This Article

ÇOLAK, N. Y., ŞİMŞEK, D. (2022). Experimental Investigation of the Using Pure Pumice Stone In Emission Control Applications. Bitlis Eren Üniversitesi Fen Bilimleri Dergisi, Cilt: 6 - Sayı: 1, 31–41. https://ajindex.com/articles/467211

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Alkaya B., Yıldırım M.A. 2000. Taşıt Kaynaklı Kirleticilerin Azaltılma Yöntemleri, Ekoloji Çevre Dergisi, 9 (34): 15-20
  2. Işıksoluğu M.A. 1997. Dizel Motorlu Taşıtların Egzoz Gazındaki Duman Koyuluğu ve Ölçümünde Karşılaşılan Sorunlar, Mühendis ve Makine Dergisi, 453 (7): 21-25
  3. Çakıroğlu M. 1996. Motorlu Taşıt Trafiğinde Egzoz Emisyonları, I. Ulusal Ulaşım Sempozyumu, İstanbul
  4. Haşimoğlu C., İçingür Y., Öğüt H. 2002. Dizel Motorlarında Egzoz Gazları Re sirkülasyonunun (EGR) Motor Performansı ve Egzoz Emisyonlarına Etkisinin Deneysel Analizi, Tübitak Dergisi, 26: 127-135
  5. Kelen F. 2014. Motorlu Taşıt Emisyonlarının İnsan Sağlığı ve Çevre Üzerine Etkileri, Yüzüncü Yıl Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 19 (1-2): 80-87
  6. Kutlar A., Ergeneman M., Arslan H., Mutlu M. 1998. Taşıt Egzozundan Kaynaklanan Kirleticiler. Birsen Yayınevi, İstanbul
  7. Dinler N., Yücel N. 2003. Karbüratörlü Bir Motora Üç Yollu Katalitik Konvertör Uygulanması, Gazi Üniversitesi Mühendislik ve Mimarlık Fakültesi Dergisi, 18 (1): 57-70
  8. Gökmen M.S. 2014. Yanma - Emisyon Modellerinin İncelenmesi ve Diesel Motorlarda SCR Sistemleri. Selçuk Üniversitesi Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, Konya
  9. Ertl G., Knözinger H., et al. 1997. Handbook of Heterogeneous Catalysis. Wiley-VCH, Weinheim
  10. Kaspar J., Fornasieo P., Hickey N. 2003. Automotive Catalytic Converters: Current Status and Some Perspective, Catalysis Today, 77: 419-449
  11. Lassi U., Polvinen R., Suhonen S., Kallinen K., Savimaki A., Harkönen M. et al. 2004. Effect of Ageing Atmosphere on the Deactivation of Pd/Rh Automotive Exhaust Gas Catalysts: Catalytic Activity and XPS Studies, Applied Catalysis A: General, 263: 241-248
  12. Brito A., Garcia F., Alvarez C., Arvelo R., Fierro J.L.G., Diaz C., 2004. High Surface Area Support/Catalyst Derived from Natural Pumice, Study of Pretreatment Variables, Ind. Eng. Chem. Res. 43 (7): 1659-1664
  13. Farizoglu B., Nuhoglu A., Yildiz E., Keskinler B., 2003. The Performance of Pumice as a Filter Bed Material under Rapid Filtration Conditions, Filtr. Sep. 40 (3): 41-46
  14. Özkan Ş.G., Tuncer G. 2001. Pomza Madenciliğine Genel Bir Bakış, 4. Endüstriyel Hammaddeler Sempozyumu, pp200-207, İzmir, Türkiye
  15. Aruna S.T., Roy S., Sharma A., Savitha G., Grips V.W. 2014. Cost-effective Eear and Oxidation Resistant Electrodeposited Ni-pumice Coating, Surface and Coatings Technology, 251: 201-209
  16. Gungor N., Tombul M., 1997. The Usage of Pumice and the Eff