SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2008 / Cilt: 18 - Sayı: 4

INFLUENCE OF THE FABRIC PROPERTIES ON FABRIC STIFFNESS FOR THE INDUSTRIAL FABRICS

Mehmet Emin YÜKSEKKAYA
Thomas HOWARD
Sabit ADANUR
Pages
263–267
Publication Date
2008-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that there were close relationships between fabric stiffness and warp diameter, filling diameter, fabric modulus and fabric density.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Flexural rigidity of a fabric is among the important properties, especially for industrial applications of high performance fabrics.
📊
Key Findings & Data:As yarn diameters and fabric modulus increase, the stiffness of fabric also increases.
💡
Conclusion & Impact:It was found that there were close relationships between fabric stiffness and warp diameter, filling diameter, fabric modulus and fabric density.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Flexural rigidity · Stiffness · Industrial fabric

Abstract

Flexural rigidity of a fabric is among the important properties, especially for industrial applications of high performance fabrics. The relationships between various fabric properties and fabric stiffness were analyzed. Several monofilament fabrics were tested in the warp direction for this purpose. It was found that there were close relationships between fabric stiffness and warp diameter, filling diameter, fabric modulus and fabric density. As yarn diameters and fabric modulus increase, the stiffness of fabric also increases. It was evident that fabric design has also an effect on fabric stiffness for the tested fabrics. The measured fabric stiffness values were compared with theoretical calculations that showed good agreement

🔖

Cite This Article

YÜKSEKKAYA, M. E., HOWARD, T., ADANUR, S. (2008). INFLUENCE OF THE FABRIC PROPERTIES ON FABRIC STIFFNESS FOR THE INDUSTRIAL FABRICS. Tekstil ve Konfeksiyon, Cilt: 18 - Sayı: 4, 263–267. https://ajindex.com/articles/46448

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (9)

  1. Peirce, F. T., 1930, “The Handle of Cloth as a Measurable Quantity”, J. Text. Int. T377-T416
  2. Guthrie, J. C., Morton, D. H., and Oliver, P. H., 1954, “An Investigation Into Bending and Torsional Rigidities of Some Fibers”, J. Text. Int. T912-T928
  3. Cooper, D. N. E., 1965, “The Stiffness of Woven Textiles”, J. Text. Inst. T317-T335
  4. Gere, J. M., 2003 Mechanics of Materials, 5nd Edition, PWS Engineering, Boston, Massachusetts
  5. Nash, W. A.,1972, Strength of Materials, 2nd Edition, McGraw-Hill, New York
  6. Tuma, J. J., 1993, Structural Analysis, McGraw-Hill, New York
  7. Standard Test Methods for Stiffness of Fabrics, D1388, American Society for Testing and Materials (ASTM) Book of Standards, Section 7, Vol 07.01, Philadelphia, 1993
  8. Montgomery, D. C., 2005, Design and Analysis of Experiments, 6th Edition, John Wiley & Sons, New York
  9. Lord, P. R. and Mohamed, M. H., 1982, Weaving: Conversion of Yarn to Fabric, Merrow Technical Library.