SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2017 / Cilt: 27 - Sayı: 1

PLASMA INDUCED GRAFT POLYMERIZATION OF A FLUOROCARBON MONOMER ON POLYAMIDE 6,6 FABRICS

Melek GÜL DİNÇMEN
Peter J. HAUSER
Nevin Çiğdem GÜRSOY
Pages
38–45
Publication Date
2017-03-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

FT-IR spectra also confirmed the high fluorocarbon content on the fabric surface after acetone extraction and after home laundering.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:2-(perfluorohexyl) ethyl acrylate, a fluorocarbon based monomer was graft polymerized on polyamide 6,6 fabrics with the aid of an atmospheric pressure plasma reactor to obtain a water repellent surface.
📊
Key Findings & Data:Di(ethylene glycol) diacrylate crosslinker was used to improve the graft yield of the polymerized layer.
💡
Conclusion & Impact:FT-IR spectra also confirmed the high fluorocarbon content on the fabric surface after acetone extraction and after home laundering.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Hydrophobic · plasma · textile

Abstract

2-(perfluorohexyl) ethyl acrylate, a fluorocarbon based monomer was graft polymerized on polyamide 6,6 fabrics with the aid of an atmospheric pressure plasma reactor to obtain a water repellent surface. Di(ethylene glycol) diacrylate crosslinker was used to improve the graft yield of the polymerized layer. Two sets of experiments were conducted to understand the effects of variables on aqueous liquid repellency of fabrics. Plasma post exposure time and the presence of a crosslinker at high levels led to higher aqueous liquid repellency values and lower surface tension values. Static water contact angles were measured for the fabrics and values as high as 158 degrees were observed. FT-IR spectra also confirmed the high fluorocarbon content on the fabric surface after acetone extraction and after home laundering.

🔖

Cite This Article

DİNÇMEN, M. G., HAUSER, P. J., GÜRSOY, N. Ç. (2017). PLASMA INDUCED GRAFT POLYMERIZATION OF A FLUOROCARBON MONOMER ON POLYAMIDE 6,6 FABRICS. Tekstil ve Konfeksiyon, Cilt: 27 - Sayı: 1, 38–45. https://ajindex.com/articles/46084

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Shishoo, R., 2007, “Introduction – The potential of plasma technology in the textile industry”, Plasma Technologies In Textiles, Shishoo, R.,Woodhead publishing limited, Cambridge, xv-xxx
  2. Ramamoorthy, A., El-Shafei, A. and Hauser, P., 2013, “Plasma induced graft polymerization of C6 fluorocarbons on cotton fabrics for sustainable finishing applications”, Plasma Processes and Polymers, 10, 430–443
  3. El-Shafei, A., Helmy, H., Ramamoorthy, A. and Hauser, P., 2015, “Nanolayer atmospheric pressure plasma graft polymerization of durable repellent finishes on cotton”, J. Coat. Technol. Res., 12(4), 681–691
  4. Sun, D. and Stylios, G.K., 2006, “Fabric surface properties affected by low temperature plasma treatment”, Journal of Materials Processing Technology, 173, 172–177
  5. Mazloumpour, M., Malshe, P., El-Shafei, A., Hauser, P., 2013, “Conferring durable antimicrobial properties on nonwoven polypropylene via plasma-assisted graft polymerization of DADMAC”, Surface and Coatings Technology, 224, 1-7
  6. Malshe, P., Mazloumpour, M., El-Shafei, A. and Hauser, P., 2012, “Functional military textile: plasma-induced graft polymerization of DADMAC for antimicrobial treatment on nylon-cotton blend fabric”, Plasma Chemistry and Plasma Processing, 32(4), 833-843
  7. Gul Dincmen, M., Hauser, P.J., Gursoy, N.Ç., 2016, “Plasma induced graft polymerization of three hydrophilic monomers on nylon 6,6 fabrics for enhancing antistatic property”, Plasma Chemistry and Plasma Processing. DOI:10.1007/s11090-016-9722-5 8. Gul Dincmen, M., Hauser, P.J., Gursoy, N.Ç., 2016, “Atmospheric pressure plasma treatment of nylon 6,6 and polyester fabrics for enhancing antistatic properties”, AATCC Journal of Research, 3(4)., 36-46
  8. Armagan, O. G., Karaguzel Kayaoglu, B., Canbaz Karakas, H. and Guner, F. S., 2014, “Adhesion strength behaviour of plasma pre-treated and laminated polypropylene nonwoven fabrics using acrylic and polyurethane-based adhesives”, Journal of Industrial Textiles, Volume 43(3), pp: 396–414
  9. Ozdogan, E., 2006, “The effect of plasma treatment over the adhesion property of polyamide 6 fabrics”, Tekstil ve Konfeksiyon, Volume 16(2), pp: 128-133
  10. Yaman, N., Ozdogan, E., and Seventekin, N., 2012, “Improving physical properties of polyamide fibers by using atmospheric plasma treatments”, Tekstil ve Konfeksiyon, 22(2), 102-105
  11. Shahidi, S., Ghoranneviss, M., Ilali, R., Karami, M. and Miladi, M., 2016, “Dyeing properties of the atmospheric pressure plasma-tr