SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2018 / Cilt: 28 - Sayı: 1

AN INVESTIGATION ON THE EFFECT OF BOTTOM LAYER MATERIAL ON THE VOLTAGE OUTPUT OF A PIEZOELECTRIC SMART WOVEN STRUCTURE

ALT KAT TABAN MALZEMESİNİN PİEZOELEKTRİK AKILLI DOKUMA YAPISININ GERİLİM ÇIKTISIÜZERİNE ETKİSİNE İLİŞKİN BİR ARAŞTIRMA

Derman VATANSEVER BAYRAMOL
Pages
60–65
Publication Date
2018-03-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The voltage output of the piezoelectric woven structure, which was placed on a steel or cork-like plate, was investigated by subjecting to a mechanical impact and the results were reported.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this work, the voltage output of a 2-dimensional(2D) woven fabric produced by using polyvinylidene fluoride-based (PVDF) piezoelectric filaments into a plain woven fabric structure was studied.
📊
Key Findings & Data:Produced filaments wereinvestigated under differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) to have an idea on the degree of crystallinity and β-phase content, respectively.A test sample was prepared by locating 2D piezoelectric woven structure between two pieces of indium tin oxide (ITO) coated polyethylene terephthalate (PET) film.
💡
Conclusion & Impact:The voltage output of the piezoelectric woven structure, which was placed on a steel or cork-like plate, was investigated by subjecting to a mechanical impact and the results were reported.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:: Gerilim çıktısı · piezoelektrik · dokuma yapı

Abstract

In this work, the voltage output of a 2-dimensional(2D) woven fabric produced by using polyvinylidene fluoride-based (PVDF) piezoelectric filaments into a plain woven fabric structure was studied. PiezoelectricPVDF filaments were produced via a method in which production and polarisation takes placesimultaneously. Produced filaments wereinvestigated under differential scanning calorimetry (DSC) and Fourier transform infrared spectroscopy (FTIR) to have an idea on the degree of crystallinity and β-phase content, respectively.A test sample was prepared by locating 2D piezoelectric woven structure between two pieces of indium tin oxide (ITO) coated polyethylene terephthalate (PET) film. The voltage output of the piezoelectric woven structure, which was placed on a steel or cork-like plate, was investigated by subjecting to a mechanical impact and the results were reported.

Özet

Bu çalışmada, poliviniliden florür esaslı (PVDF) piezoelektrik filamentlerin, bezayağı dokuma kumaş yapısına dönüştürülmesiyle üretilen 2 boyutlu (2D) dokuma kumaşın gerilim çıkışı incelendi.Piezoelektrik PVDF filamentleri, üretim ve polarizasyonun aynı anda gerçekleştiği bir yöntemle üretildi.Üretilen filamentler, kristallik derecesi ve β-faz içeriği hakkında bir fikir edinmek için sırasıyla diferansiyel tarama kalorimetresi (DSC) ve Fourier transform infrared spektroskopi (FTIR) ile incelendi.2D piezoelektrik dokuma yapı, iki adet indiyum kalay oksit (ITO) kaplı polietilen tereftalat (PET) film arasına konularak bir test numunesi hazırlandı.Bir çelik veya mantar benzeri plaka üzerine yerleştirilen piezoelektrik dokuma yapının gerilim çıktısı, mekanik bir etkiye maruz bırakılarak araştırıldı ve sonuçlar rapor edildi.

🔖

Cite This Article

BAYRAMOL, D. V. (2018). AN INVESTIGATION ON THE EFFECT OF BOTTOM LAYER MATERIAL ON THE VOLTAGE OUTPUT OF A PIEZOELECTRIC SMART WOVEN STRUCTURE. Tekstil ve Konfeksiyon, Cilt: 28 - Sayı: 1, 60–65. https://ajindex.com/articles/46035

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Kawai H., 1969, “The Piezoelectricity of Poly(vinylidene Fluoride)”,The Japan Society of Applied Physics, Vol: 8(7), pp: 975
  2. Bauer F., 20 02,“Ferroelectric PVDF polymer for high pressure and shock compression sensors”,Proc. 11th Int. Symp. on Electrets, Vol: 698, pp: 219-222
  3. Granstrom J., Feenstra J., Sodano H.A. and Farinholt K., 2007, “Energy harvesting from a backpack instrumented with piezoelectric shoulder straps”,Smart Materials and Structures, Vol: 16(5), pp:1810
  4. Li S. and Lipson H., 2009,“Vertical-stalk flapping-leaf generator for wind energy harvesting”,Proc. ASME 2009 Conf. on Smart Materials, Adaptive Structures and Intelligent Systems, pp: 1-9
  5. Vatansever D., Hadimani L.R., Shah T. and Siores E., 2012,“Voltage response of piezoelectric PVDF films in vacuum and at elevated temperatures”,Smart Mater. Struct., Vol: 21, 085028
  6. Seminara L., Capurro M., Cirillo P., Cannata G. and Valle M., 2011, “Electromechanical characterization of piezoelectric PVDF polymer films for tactile sensors in robotics applications”,Sensors and Actuators A: Physical, Vol: 19(1), pp: 49-58
  7. Wang Y.R., Zheng J.M., Ren G.Y., Zhang P.H. and Xu C., 2011, “A flexible piezoelectric force sensor based on PVDF fabrics”,Smart Materials and Structures, Vol: 20(4)
  8. Schmidt V.H., Lediaev L. and Polasik J., 2006, “Piezoelectric Actuators Employing PVDF Coated with Flexible PEDOT-PSS Polymer Electrodes”, IEEE Transactions on Dielectrics and Electrical Insulation, Vol: 13(5), pp: 1140-1148
  9. Tamjidi N., Sato K., Sakurai J. and Hata S., 2013, “PVDF Actuator for High-Frequency Fatigue Test of Thin-Film Steels”,IEEJ Transactions On Electrical And Electronic Engineering, Vol: 8, pp: 99-205
  10. ShenckN.S. and Paradiso J.A., 2001, “Energy scavenging with shoe-mounted piezoelectrics”, IEEE Micro, Vol: 21, pp: 30-42
  11. Jung W.-S., Lee M., Baek S.-H., Jung I. K., Yoon S.-J. and Kang C.-Y., 2016, “Structural approaches for enhancing output power of piezoelectric polyvinylidene fluoride generator”,Nano Energy, Vol: 22, pp: 514-523
  12. Hadimani R.L., Vatansever Bayramol D., Sion N., Shah T., Qian L., Shi S. and Siores E., 2013, “Continuous production of piezoelectric PVDF fibre for e-textile applications”,Smart Mater. Struct., Vol: 22, 075017
  13. Lund A., 2013, “Melt Spun Piezoelectric Textile Fibres - An Experimental Study”, PhD Thesis, Chalmers University Of Technology, Sweden
  14. MatsoukaD., Vassiliadis S., Prekas K., Bayramol D. V., Soin N. and Siores E., 2016