SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2019 / Cilt: 29 - Sayı: 3

ANALYZING SOME OF THE DUAL-CORE YARN SPINNING PARAMETERS ON YARN AND VARIOUS FABRIC PROPERTIES

Demet YILMAZ
Sevim Hümeyra ÇELİKKAN AYDOĞDU
Pages
197–207
Publication Date
2019-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Therefore, it was possible to investigate the effect of sheath fibre type, yarn count and core filament linear density on yarn and fabric properties of dual-core yarns.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Nowadays, in order to improve some of the properties of core-spun yarns, a new type of core-spun yarn called as dual-core has been developed.
📊
Key Findings & Data:Therefore, in this study, dual-core yarns were produced with three different sheath fibres (viscose, cotton and cotton/Tencel blended fibres) and two different core filament linear density (50 and 70 denier) having three different yarn counts (Ne 12/1, Ne 16/1 and Ne 20/1).
💡
Conclusion & Impact:Therefore, it was possible to investigate the effect of sheath fibre type, yarn count and core filament linear density on yarn and fabric properties of dual-core yarns.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Dual-core yarn · core-spun yarn · elastic fabrics

Abstract

Nowadays, in order to improve some of the properties of core-spun yarns, a new type of core-spun yarn called as dual-core has been developed. In literature, there are limited studies and hence findings about dual-core yarns. Therefore, in this study, dual-core yarns were produced with three different sheath fibres (viscose, cotton and cotton/Tencel blended fibres) and two different core filament linear density (50 and 70 denier) having three different yarn counts (Ne 12/1, Ne 16/1 and Ne 20/1). Woven and knitted fabrics were manufactured and yarn quality parameters and some of the fabric properties such as fabric pilling behaviour, breaking and bursting strength, breaking elongation and bending rigidity were investigated. Therefore, it was possible to investigate the effect of sheath fibre type, yarn count and core filament linear density on yarn and fabric properties of dual-core yarns.

🔖

Cite This Article

YILMAZ, D., AYDOĞDU, S. H. Ç. (2019). ANALYZING SOME OF THE DUAL-CORE YARN SPINNING PARAMETERS ON YARN AND VARIOUS FABRIC PROPERTIES. Tekstil ve Konfeksiyon, Cilt: 29 - Sayı: 3, 197–207. https://ajindex.com/articles/45969

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Hua T, Wong NS, Tang WM. 2018. Study on properties of elastic core-spun yarns containing a mix of Spandex and PET/PTT bi-component filament as core Textile Research Journal 88(9), 1065-1076
  2. Kılıç G. 2017. Improving quality in core-spun yarn production. PhD thesis, Erciyes Üniversity, Natural and Applied Sciences, Kayseri, Turkey
  3. El-Tantawy S, Sabry M, Bakry M. 2007. The effect of different weft yarn production technique on the pilling property of jeans fabrics International Design Journal 7(3), 161-169
  4. Ertaş OG, Ünal BZ, Celik N. 2016. Analyzing the effect of the elastane-containing dual-core weft yarn density on the denim fabric performance properties The Journal of The Textile Institute 107(1), 116-126
  5. Bizjak M, Kadoğlu H, Kostajnšek K, Çelik P, Bayraktar GB, Duran D, Dimitrovski K. 2017. Properties of elastic fabrics with treated and untreated Co/PBT yarns in weft direction IOP Conference Series: Materials Science and Engineering 254(9), 092001
  6. Kaynak HK. 2017. Optimization of stretch and recovery properties of woven stretch fabrics Textile Research Journal 87(5), 582–592
  7. Broega AC, Rocha AM, Souto AP, Ferreira F, Oliveira L. 2016. Development and characterization of cotton elastic yarns to improve wear comfort of bi-elastic thin fabrics. 16th Autex World Textile Conference 2016 June 8–10, Ljubljana, Slovenia
  8. Kadoğlu H, Dimitrovski K, Marmaralı A, Çelik P, Bayraktar G, Bedez Üte T, Ertekin G, Demšar A, Kostanjek K. 2016. Investigation of the characteristics of elasticised woven fabric by using PBT filament yarns Autex Research Journal 16(2), 109-117
  9. Maqsood M, Tanveer H, Mumtaz HM, NawabY. 2016. Modeling the effect of elastane linear density, fabric thread density, and weave float on the stretch, recovery, and compression properties of bi-stretch woven fabrics for compression garments The Journal of The Textile Institute 107(3), 307-315
  10. Akankwasa NT, Jun W, Yuze Z, Mushtaq M. 2014. Properties of cotton/T-400 and 100% cotton plain knitted fabric made from ring spun yarn Materialwissenschaft und Werkstofftechnik 45(11), 1039-1044
  11. Akankwasa NT, Wang J, Zhang Y. 2015. Study of optimum spinning parameters for production of T-400/cotton core spun yarn by ring spinning The Journal of The Textile Institute 107(4), 504-511
  12. Qadir MB, Hussain T, Malik M, Fahemm A, Jeong SH. 2014. Effect of elastane linear density and draft ratio on the physical and mechanical properties of core-spun cotton yarns Journal of Textile