Journals / Akademik Gıda / 2022 / Cilt: 20 - Sayı: 1

Production and Physicochemical Properties of Casein-Based Adhesives

Kazein Bazlı Yapıştırıcıların Üretimi ve Fizikokimyasal Özellikleri

Pages
12–19
Publication Date
2022-04-03
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Results showed that the type of casein raw material used in the production of adhesives had an influence on the adhesive properties and the highest adhesive strength was achieved with the enriched αS-casein fraction and micellar casein.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, different adhesives manufactured by using various casein powders (micellar casein, αS-, β- and ĸ-casein fractions, sodium caseinate and calcium caseinate) were investigated for their properties and potential application in the food industry.
📊
Key Findings & Data:Achieved purities of αS-, β- and κ-casein fractions were higher than 25, 91 and 54%, respectively.
💡
Conclusion & Impact:Results showed that the type of casein raw material used in the production of adhesives had an influence on the adhesive properties and the highest adhesive strength was achieved with the enriched αS-casein fraction and micellar casein.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kazein · Yapışkanlık · Gıda endüstrisi

Abstract

In this study, different adhesives manufactured by using various casein powders (micellar casein, αS-, β- and ĸ-casein fractions, sodium caseinate and calcium caseinate) were investigated for their properties and potential application in the food industry. Casein-based adhesives using different sources of caseins were produced and the differences in their adhesive strength were determined. For the isolation of casein fractions, the methods of selective solubility, precipitation and a decanter centrifuge (for separation of precipitated casein and supernatant) were used. Achieved purities of αS-, β- and κ-casein fractions were higher than 25, 91 and 54%, respectively. Results showed that the type of casein raw material used in the production of adhesives had an influence on the adhesive properties and the highest adhesive strength was achieved with the enriched αS-casein fraction and micellar casein.

Özet

Bu çalışmada, çeşitli kazein tozları (misel kazein, αS-, β- ve ĸ-kazein fraksiyonları, sodyum kazeinat ve kalsiyum kazeinat) kullanılarak üretilen farklı yapıştırıcıların özellikleri ve gıda endüstrisinde kullanım olanağı araştırılmıştır. Farklı kazein kaynakları kullanılarak kazein bazlı yapıştırıcılar üretilmiş ve yapışkan mukavemetlerindeki farklılıkları belirlenmiştir. Kazein fraksiyonlarının izolasyonu için seçici çözünürlük, çökeltme ve dekanter santrifüj (çöktürülmüş kazeinin ve süpernatantın ayrılması için) yöntemleri kullanılmıştır. αS-, β- ve ĸ-kazein fraksiyonları için elde edilen saflıklar sırasıyla %25, 91 ve 54’ten büyük bulunmuştur. Sonuçlar, yapıştırıcıların üretiminde kullanılan kazein hammaddesinin türünün yapıştırıcı özellikleri üzerinde etkili olduğunu ve en yüksek yapışkan gücünün zenginleştirilmiş αS-kazein fraksiyonu ve misel kazein ile elde edildiğini göstermiştir.

🔖

Cite This Article

ATAMER, Z. (2022). Production and Physicochemical Properties of Casein-Based Adhesives. Akademik Gıda, Cilt: 20 - Sayı: 1, 12–19. https://ajindex.com/articles/454453

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Walstra, P., Wouters, J.T.M., Geurts, T.J. (2006). Dairy Science and Technology. Second Edition. Taylor & Francis Group, Boca Raton, FL, USA
  2. Guo, M. Wang, G. (2016). Milk protein polymer and its application in environmentally safe adhesives. Polymers, 8(9), 324
  3. Habenicht, G. (2009). Kleben - Grundlagen, Technologien, Anwendungen. Springer-Verlag, Berlin
  4. Atamer, Z., Post, A.E., Schubert, T., Holder, A., Boom, R.M., Hinrichs, J. (2017). Bovine β-casein: Isolation, properties and functionality. A review. International Dairy Journal, 66, 115-125
  5. Thienel, K.J.F., Holder, A., Schubert, T., Boom, R.M., Hinrichs, J., Atamer, Z. (2018). Fractionation of milk proteins on pilot scale with particular focus on β-casein. International Dairy Journal, 79, 73-77
  6. Audic, J.L., Chaufer, B., Daufi, G. (2003). Non-food applications of milk components and dairy co-products: A review. Lait, 417-438
  7. Sutermeister, E., Brühl, E. (1932). Das Kasein: Chemie und technische Verwertung, Aichstetten, Kremer Reprint
  8. U.S. Department of Agriculture, Forest Products Laboratory & University of Wisconsin, M. (1967). Casein glues: their manufacture, preparation, and application, U.S. Department of Agriculture, U.S. Forest Service Research Note FPL-0158
  9. United States Tariff Commission (1926). Casein: Report of the United States Tariff Commission to the President of the United States
  10. VLB Berlin, Forschungsinstitut für Maschinen- und Verpackungstechnik & Wenk, G. (2010). Abloeseverhalten von Getraenkeflaschen-Etiketten aus Papier, Berlin
  11. Lüttgen, C. (1953) Die Technologie der Klebstoffe, Berlin-Wilmersdorf, Wilhelm Pansegrau Verlag
  12. Broich, L., Herlfterkamp, B., Onusseit, H. (1992a) Wasserhaltiger Klebstoff auf Basis von Casein EP 0 597 920 B1
  13. Corwin, J.F. White, R.C. (1941) Bottle Labeling Adhesive US2351109
  14. Koerzendoerfer, A., Noebel, S., Hinrichs, J. (2017). Particle formation induced by sonication during yogurt fermentation e impact of exopolysaccharide-producing starter cultures on physical properties. Food Research International, 97, 170-177
  15. Schaefer, J., Schubert, T., Atamer, Z. (2019). Pilot-scale b-casein depletion from micellar casein via cold microfiltration in diafiltration mode. International Dairy Journal, 97, 222-229
  16. Schubert, T., Ergin, I., Panetta, F., Hinrichs, J., Atamer, Z. (2021). Application of a temperature-controlled decanter centrifuge for the fractionation of aS-, b- and k-casein on pil