SavedAdd your journal

Journals / Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi / 2018 / Cilt: 28 - Sayı: 3

THE INFLUENCE OF PROPHYLACTIC PASTE AND BLEACHING ON THE MICROHARDNESS OF DIFFERENT COMPOSITE RESINS

PROFİLAKTİK PAT VE BEYAZLATMA UYGULAMASININ FARKLI KOMPOZİT REZİNLERİN MİKROSERTLİKLERİ ÜZERİNE ETKİSİ

Nuray ATTAR
Fatma Dilşad ÖZ
Yonca KORKMAZ
Ceren Özge BİÇER
Pages
285–291
Publication Date
2022-10-10
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Multiple comparison was performed with the Tukey HSD test (p

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Aim: The aim of this study was to evaluate the microhardness of different types of composites after application of prophylactic paste and bleaching.
📊
Key Findings & Data:Materials and Methods: A total of 120 specimens (40 specimens for each restorative materials) were fabricated using a nanohybrid (GrandioSO) (Group A), a nanofill flowable (Filtek Supreme XT Flow) (Group B) and a nanofill composite resin (Filtek Ultimate) (Group C) in a plexiglass mold covered with a Mylar strip.
💡
Conclusion & Impact:Multiple comparison was performed with the Tukey HSD test (p
🔬Design:Research Article
📍Scope:120 specimens
⚙️Variables:Domain Parameters

Abstract

Aim: The aim of this study was to evaluate the microhardness of different types of composites after application of prophylactic paste and bleaching. Materials and Methods: A total of 120 specimens (40 specimens for each restorative materials) were fabricated using a nanohybrid (GrandioSO) (Group A), a nanofill flowable (Filtek Supreme XT Flow) (Group B) and a nanofill composite resin (Filtek Ultimate) (Group C) in a plexiglass mold covered with a Mylar strip. After polymerization, all specimens were finished and polished with Sof-Lex (3M ESPE) Polishing disc system and each restorative material specimens were divided into four treatment groups: Group 1: stored in distilled water at 37°C for two weeks (control), Group 2: Application of Proxyt Fine Prophylactic paste, Group 3: Bleaching with Pola Office + and Group 4: Application of Proxyt Fine Prophylactic paste + bleaching with Pola Office+ (totally 12 groups). The microhardness measurements were performed using a digital microhardness tester (HMV-2, SHIMADZU, Kyoto, Japan) (load 500 g; dwell time 15 seconds). The data were analyzed using the one-way ANOVA test. Multiple comparison was performed with the Tukey HSD test (p

Özet

Amaç: Bu çalışmanın amacı, profilaktik pat ve beyazlatmauygulamalarının ardından farklı tip kompozitlerinmikrosertliklerini değerlendirmektir.Gereç ve Yöntem: Şeffaf bant ile kapatılmış camkalıplarda, nanohibrid (GrandioSO) (Grup A), nanodolduruculuakışkan (Filtek Supreme XT Flow) (Grup B) venanodolduruculu kompozit (Filtek Ultimate) (Grup C) iletoplam 120 örnek (her bir restoratif materyal için 40örnek) hazırlanmıştır. Polimerizasyonun ardından tümörneklere Sof-Lex Disk Sistemi ile bitirme ve polisaj işlemleriuygulanmış ve her bir restoratif materyalin örnekleri 4gruba ayrılmıştır. Grup 1: 37°C distile suda iki hafta bekletilmiştir(kontrol), Grup 2: Proxyt Fine profilaktik pat uygulanmıştır,Grup 3: Pola Office + beyazlatma yapılmıştır,Grup 4: Proxyt Fine profilaktik pat uygulaması + PolaOffice+beyazlatma yapılmıştır (toplam 12 grup). Mikrosertlikölçümleri dijital bir mikrosertlik test cihazı ilegerçekleştirilmiştir (HMV-2, SHIMADZU, Kyoto, Japonya)(yük 500 g; bekleme süresi 15 saniye). Veriler tek yönlüANOVA test ile analiz edilmiştir. Çoklu karşılaştırmalarTukey test ile gerçekleştirilmiştir (p

🔖

Cite This Article

ATTAR, N., ÖZ, F. D., KORKMAZ, Y., BİÇER, C. Ö. (2022). THE INFLUENCE OF PROPHYLACTIC PASTE AND BLEACHING ON THE MICROHARDNESS OF DIFFERENT COMPOSITE RESINS. Atatürk Üniversitesi Diş Hekimliği Fakültesi Dergisi, Cilt: 28 - Sayı: 3, 285–291. https://ajindex.com/articles/451982

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. Heymann HO. Tooth whitening: facts and fallacies. Br Dent J 2005;19:514. Gurgan S, Alpaslan T, Kiremitci A, Cakir FY, Yazici E, Gorucu J. Effect of different adhesive systems and laser treatment on the shear bond strength of bleached enamel. J Dent 2009;37:527-34.
  2. Marshall K, Berry TG, Woolum J. Tooth whitening: current status. Compend Contin Educ Dent 2010;31:486-92.
  3. Josey AL, Meyers IA, Romaniuk K, Symons AL. The effect of a vital bleaching technique on enamel surface morphology and the bonding of composite resin to enamel. J Oral Rehabil 1996;23:244-50. Joiner A. The bleaching of teeth: a review of the literature. J Dent 2006;34:412-9. Chen MH. Update on dental nanocomposites. J Dent Res 2010;89:549-60.
  4. Moraes RR, Marimon JL, Schneider LF, Correr Sobrinho L, Camacho GB, Bueno M. Carbamide peroxide bleaching agents: effects on surface roughness of enamel, composite and porcelain. Clin Oral Investig 2006;10:23-8.
  5. Ozel E, Korkmaz Y, Attar N, Karabulut E. Effect of one-step polishing systems on surface roughness of different flowable restorative materials. Dent Mater J 2008;27:755-64. Jefferies SR. The art and science of abrasive finishing and polishing in restorative dentistry. Dent Clin North Am 1998;42:613-27.
  6. Gordan VV, Patel SB, Barrett AA, Shen C. Effect of surface finishing and storage media on bi-axial flexure strength and microhardness of resin-based composite. Oper Dent 2003;28:560-7.
  7. Choi MS, Lee YK, Lim BS, Rhee SH, Yang HC. Changes in surface characteristics of dental resin composites after polishing. J Mater Sci Mater Med 2005;16:347-53. Strassler HE. Polishing composite resins. J Esthet Dent 1992;4:177-9. AlQahtani MQ. The effect of a 10% carbamide peroxide bleaching agent on the microhardness of four types of direct resin-based restorative materials. Oper Dent 2013;38:316-23.
  8. Okada K, Tosaki S, Hirota K, Hume WR. Surface hardness change of restorative filling materials stored in saliva. Dent Mater 2001;17:34-9.
  9. Erdemir U, Sancakli HS, Yildiz E. The effect of onestep and multi-step polishing systems on the surface roughness and microhardness of novel resin composites. Eur J Dent 2012;6:198-205.
  10. Wang L, Francisconi LF, Atta MT, Dos Santos JR, Del Padre NC, Gonini A, Jr., et al. Effect of bleaching gels on surface roughness of nanofilled composite resins. Eur J Dent 2011;5:173-9.
  11. Wattanapayungkul P, Yap AU, Chooi KW, Lee MF, Selamat RS, Zhou RD. The effect of home bleaching agents on the surface roughness of tooth-colored restoratives with time