SavedAdd your journal

Journals / Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2017 / Cilt: 17 - Sayı: 1

Investigations on LaFeO3 Thin Film Using Sol–Gel Technique for Magnet Technology

Mehmet Faruk EBEOĞLUGİL
Pages
346–351
Publication Date
2017-04-24
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that surface morphologies of the film with homogeneous structures.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, lanthanum Ferrite (LaFeO3) thin films were prepared by sol-gel method for magnet technology.
📊
Key Findings & Data:With this context, precursor solutions with low contact angles were synthesized from all nitrate salts of the respective cations (La, Fe), using methanol as solvent and citric acid as chelating agents.
💡
Conclusion & Impact:It was found that surface morphologies of the film with homogeneous structures.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:LaFeO3 · Sol-gel · Magnetic properties

Özet

In this study, lanthanum Ferrite (LaFeO3) thin films were prepared by sol-gel method for magnet technology. With this context, precursor solutions with low contact angles were synthesized from all nitrate salts of the respective cations (La, Fe), using methanol as solvent and citric acid as chelating agents. The obtained gel films were dried at heat-treated at 500 oC for 10 minutes in air. The oxide thin films were annealed at 850 oC for 60 and 120 minutes and 1000 oC for 120 minutes in air. DTA/TG results revealed that endothermic and exothermic reactions are observed at temperature between 29 oC and 450 oC due to solvent removal, combustion of carbon based materials and oxidation of La and Fe. The spectrum of La-Fe precursor film annealed at 850oC and 1000 oC shows an absence of absorption bands corresponding to organics and hydroxyls. LaFeO3 phase was found as well as pure perovskite with low intensity from XRD patterns. It was found that surface morphologies of the film with homogeneous structures. The thermal, phase, microstructural and magnetic properties of the obtained samples were determined by TG/DTA, FTIR, XRD, SEM, XPS, wetting angles and VSM. The results show that sustained perovskite polycrystalline films were grown on the (100)-oriented Si substrates. In addition, the films show strong ferromagnetic behavior.

🔖

Cite This Article

EBEOĞLUGİL, M. F. (2017). Investigations on LaFeO3 Thin Film Using Sol–Gel Technique for Magnet Technology. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 17 - Sayı: 1, 346–351. https://ajindex.com/articles/451520

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. Abrashev, M. V., Litvinchuk, A. P., Iliev, M. N., et al., 1999. Comparative study of optical phonons in the rhombohedrally distorted perovskites LaAlO3 and LaMnO3. Phys. Rev. B 59, 4146. doi: http://dx.doi.org/10.1103/PhysRevB.59.4146
  2. Bai, S., Shi, B., Ma, L., Yang, P., Liu, D.Q., Chen, A.F., 2009. Synthesis of LaFeO3 catalytic materials and their sensing proper- ties. Sci. China Ser. B 52, 2106. Brankovic Z, Duris K, Radojkovic A, et al., 2010. Magnetic properties of doped LaMnO3 ceramics obtained by a polymerizable complex method. J. Sol–Gel Sci. Technol. 55 311. doi: 10.1007/s10971-010-2251-4
  3. C. Monterrubio-Badillo, H. Ageorges, T. Chartier, et al., 2006. Preparation of LaMnO3 perovskite thin films by suspension plasma spraying for SOFC cathodes. Surface and Coatings Technology, 200, 3743-3756. doi:10.1016/j.surfcoat.2005.01.002 Chandradass, J., Kim, K.H., 2010. Nano-LaFeO3 powder preparation by calcining an emulsion. Mater. Chem. Phys. 122, 329. D. Kivana, J. Delval, J. Kirchnerova, J. Chaouki, 1997. Appl.Catal. A: Gen., 165 - 171. G. Zampieri, M. Abbate, F. Prado, et al., 2002. XPS and XAS spectra of CaMnO3 and LaMnO3. Physica B Condensed Matter, 320, 1–4:51–55. doi:10.1016/S0921-4526(02)00618-X Gupta A., McGuire T. R., Duncombe P. R., et al., 1995. Applied Physics Letter, 67, 349 N. Setter, D. Damjanovic, L. Eng, et al., 2006. Ferroelectric thin films: Review of materials, properties, and applications. Journal of Applied. Physics. 100, 051606. doi: http://dx.doi.org/10.1063/1.2336999
  4. Ni H., Yu D., Zhao K., Kong Y. C., et al., 2011. Oxygen content dependence of the photovoltaic characteristic of miscut manganite thin films. J. Appl. Phys. 110 033112 doi: http://dx.doi.org/10.1063/1.3620984 O. Yamamoto, 2000. Solid oxide fuel cells: fundamental aspects and prospects. Electrochimica Acta, 45, 2423-2435. doi:10.1016/S0013-4686(00)00330-3 P. R. N. Silva and A. B. Soares, 2009. Lanthanum based high surface area perovskite-type oxide and application in CO and propane combustion. Eclet. Quím., vol.34, no.1, São Paulo. doi: http://dx.doi.org/10.1590/S0100- 46702009000100005 Poplawski, K., Lichtenberger, J., Keil, F.J., Schnitzlein, K., Amiridis, M.D., 2000. Catalytic oxidation of 1,2- dichlorobenzene over ABO3-type perovskites. Catal. Today 62, 329. Raj Sankar C. and Joy P. A., 2005. Magnetic properties of the self-doped lanthanum manganites La1−xMnO3. Physical Review B, 72-02440. doi: http://dx.doi.org/10.1103/PhysRevB.72.024405.
  5. Ritter C, I barra M R, D e