Journals / Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik / 2015 / Cilt: 16 - Sayı: 2

RHEOLOGICAL INVESTIGATION OF NANOCOMPOSITES OBTAINED FROM ETHYLENE VINYL ACETATE (EVA) COPOLYMERORGANOCLAY

Pages
265–274
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result,it was found that the organoclay acted as a lubricant for the EVA copolymer.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, ethylene-vinyl acetat copolymer (EVA 40W; containing 40% wt. vinyl acetate) wereblended with an organoclay (Nanocor I 44PT) with the weight ratios of 0, 1, 3, 6 and 8% by means of asingle-screw extruder with a transparent barrel in order to obtain nano-composites.
📊
Key Findings & Data:The addition of organoclay within the polymer matrix increased the strength of thenanocomposite structure.
💡
Conclusion & Impact:As a result,it was found that the organoclay acted as a lubricant for the EVA copolymer.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, ethylene-vinyl acetat copolymer (EVA 40W; containing 40% wt. vinyl acetate) wereblended with an organoclay (Nanocor I 44PT) with the weight ratios of 0, 1, 3, 6 and 8% by means of asingle-screw extruder with a transparent barrel in order to obtain nano-composites. The rheologicalproperties of nanocomposites obtained with the addition of organoclay to polymer matrix phase werestudied systematically. The nanocomposites produced by this study exhibited different rheologicalproperties. The addition of organoclay within the polymer matrix increased the strength of thenanocomposite structure. Also, it was seen that the storage modulus (G´ ) and the loss modulus (G ) atlow frequencies increased as the amount of organoclay increased in the polymer matrix phase. Themixing process of organoclay and polymer matrix phase was monitored visually since the barrel of thesingle-screw extruder was made of transparent glass. It was monitored and calculated from visualinspections that the residence time decreased due to the increase of the organoclay amount. As a result,it was found that the organoclay acted as a lubricant for the EVA copolymer.

🔖

Cite This Article

AYDIN, İ., ERGİN, M. F. (2022). RHEOLOGICAL INVESTIGATION OF NANOCOMPOSITES OBTAINED FROM ETHYLENE VINYL ACETATE (EVA) COPOLYMERORGANOCLAY. Anadolu Üniversitesi Bilim ve Teknoloji Dergisi :A-Uygulamalı Bilimler ve Mühendislik, Cilt: 16 - Sayı: 2, 265–274. https://ajindex.com/articles/438360

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Alexandre, M. B. (2001). Preparation and Properties of Layered Silicate Nanocomposites based on Ethylene Vinyl Acetate Copolymers. Macromolecular Rapid Communications, 643-646.
  2. Braglia, M. C. (2002). Thermal Degradation and Rheological Behaviour of EVA/Montmorillonite Nanocomposites. Polymer Degradation and Stability, 299-304.
  3. Chang, Y. W. (2003). Preparation and Characterization of Ethylene Vinyl Acetate Copolymer/Montmorillonite Nanocomposite. Polymer International, 153–157.
  4. Choi, W. M. (2004). Thermal and Mechanical Properties of Syndiotactic Polystyrene/Organoclay Nanocomposites with Different Microstructures. Journal of Polymer Science Part B: Polymer Physics, 1685–1693.
  5. Dintcheva, N. T. (2006). EVA Copolymer-based Nanocomposites: Rheological Behavior under Shear and Isothermal and Non-isothermal Elongational Flow. Polymer Testing, 701-708.
  6. Galgali, G. L. (2001). A Rheological Study on the Kinetics of Hybrid Formation in Polypropylene Nanocomposites. Macromolecules, 852–858.
  7. Giannelis, E. P. (1996). Polymer Layered Silicate Nanocomposites. Advanced Materials, 29–35.
  8. Giannelis, E. P. (1997). Rheology of End-tethered Polymer Layered Silicate Nanocomposites. Macromolecules, 4097–4102.
  9. Ha, C. S. (2003). Nanostructure of EVA/Organoclay Nanocomposites: Effects of Kinds of Organoclays and Grafting of Maleic Anhydride on to EVA. Journal of Applied Polymer Science, 1901–1909.
  10. Kotsilkova, R. (2002). Rheology–structure Relationship of Polymer/Layered Silicate Hybrids. Materials, 283. Mascosko, C. (1994). Rheology Principles. New York: VCH. Okamoto, K. O. (2003). Structure–Property Relationship in Biodegradable Poly(butylenes succinate)/Layered Silicate Nanocomposites. Macromolecules, 2355–2367.
  11. Okamoto, M. v. (2003). Polymer/Layered Silicate Nanocomposites: A Review from Preparation to Processing. Progress in Polymer Science, 1539–1641.
  12. Park, J. H. (2003). The Relationship Between Nano- and Micro-structures and Mechanical Properties in PMMA–Epoxy–Nanoclay Composites. Polymer, 2091.
  13. Powell, C. E. (2006). Physical Properties of Polymer/Clay Nanocomposites. Current opinion in Solid State & Materials Science, 73-80.
  14. Ergin, M. F. (2011). Tek Vidalı Ekstruderlerde Polimerlerin Reolojik Akışının Modellenmesi. (Yayımlanmamış doktora tezi), İstanbul, Türkiye: İstanbul Üniversitesi/Kimya Mühendisliği Bölümü