SavedAdd your journal

Journals / Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2020 / Cilt: 20 - Sayı: 1

Effect of the Tergitol Concentration on the Electrodepositon of Ni- B/hBN composite Coatings

Tergitol Konsantrasyonun Ni-B/hBN Kompozit Kaplamaların Elektrodepolanması Üzerine Etkisi

Ali TOZAR
Pages
103–110
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was concluded that Tergitol™ can be used as an effective surfactant for electrodeposition of metal matrix composite coatings.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, hexagonal boron nitride (hBN) nanoparticles which has superior solid lubrication and mechanical strength properties reinforced nickel-boron (Ni-B) alloy matrix composite coatings were fabricated by galvanostatic electrodeposition on 304 L grade steel widely used in the industry.
📊
Key Findings & Data:In the study, Tergitol ™ was used as a surfactant.
💡
Conclusion & Impact:It was concluded that Tergitol™ can be used as an effective surfactant for electrodeposition of metal matrix composite coatings.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, hexagonal boron nitride (hBN) nanoparticles which has superior solid lubrication and mechanical strength properties reinforced nickel-boron (Ni-B) alloy matrix composite coatings were fabricated by galvanostatic electrodeposition on 304 L grade steel widely used in the industry. In the study, Tergitol ™ was used as a surfactant. The effect of the surfactant concentration on the structural, morphological, microhardness, and corrosion protection properties of the coatings was investigated using XRD, FE-SEM, Vickers microhardness, potentiodynamic polarization, and electrochemical impedance spectroscopy, respectively. It was concluded that Tergitol™ can be used as an effective surfactant for electrodeposition of metal matrix composite coatings.

Özet

Bu çalışmada endüstriyel olarak sıklıkla kullanılan 304L kalite çelik altlıklar üzerine, üstün katı yağlayıcılıkve mekanik mukavemet özellikleri gösteren hegzagonal bor nitrür (hBN) nano partikülleriyledesteklenmiş nikel-bor (Nİ-B) alaşım matrisli kompozit kaplamalar galvanostatik elektrodepolamayoluyla kaplanmıştır. Çalışmada Tergitol™ yüzey aktif madde (sürfaktan) olarak kullanılmış ve bu yüzeyaktif maddenin depolama süspansiyonundaki konsantrasyonunun kaplamaların yapısal, morfolojik,mikrosertlik, ve korozyon koruma özellikleri üzerine etkisi sırasıyla XRD, FE-SEM, Vickers mikrosertlik,potansiyodinamik polarizasyon ve elektrokimyasal empedans spektroskopisi kullanılarak incelenmiştir.Sonuç olarak, Tergitol'ün metal matrisli kompozit kaplamaların elektrodepolanması için etkili bir yüzeyaktif madde olarak kullanılabileceği sonucuna varılmıştır.

🔖

Cite This Article

TOZAR, A. (2022). Effect of the Tergitol Concentration on the Electrodepositon of Ni- B/hBN composite Coatings. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 20 - Sayı: 1, 103–110. https://ajindex.com/articles/430118

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Afroukhteh, S., Dehghanian, C. and Emamy, M. (2012). Corrosion behavior of Ni–P/nano-TiC composite coating prepared in electroless baths containing different types of surfactant. Progress in Natural Science: Materials International, 22(5), 480-487.
  2. Gu, W., Liu, C., Tang, J., Liu, R., Yang, H. and Hu, J. (2018). Improving zinc electrodeposition in ammoniacal electrolytes with the saturated dissolved methyltrioctylammonium chloride. Hydrometallurgy, 175, 43-51.
  3. Gyawali, G., Hamal, K., Joshi, B., Rajbhandari, A. and Wohn Lee, S. (2014). Microstructural and electrochemical analysis of Ni–SiC composite coatings prepared in presence of additives. Materials Letters, 126, 228-231.
  4. Kumaraguru, S. and Mohan, S. (2018). Study of Ni-Bi2O3- CeO2 composite coatings: Hierarchical microstructure and augmented microhardness for surface engineering application. Surface & Coatings Technology, 349, 567-575.
  5. Kwon, H. B., Kim, K., Ahn, H. R. and Kim, Y. J. (2017). Electrodeposition and Characterization of Nanocrystalline Ni-B with Low Boron Content for MEMS Applications. Sensors and Materials, 29(3), 225-234.
  6. Li, B. S., Huan, Y. X., Luo, H. and Zhang, W. W. (2019). Electrodeposition and properties of Ni-B/SiC nanocomposite coatings. Surface Engineering, 35(2), 110-120.
  7. Maharana, H. S. and Basu, A. (2018). Effects of Different Surfactants on Structural, Tribological and Electrical Properties of Pulsed Electro- Codeposited Cu-ZrO2 Composite Coatings. Journal of Materials Engineering and Performance, 27(4), 1854-1865.
  8. Mardani, R., Asrar, A. and Ershadifar, H. (2018). The effect of surfactant on the structure, composition and magnetic properties of electrodeposited CoNiFe /Cu microwire. Materials Chemistry and Physics, 211, 160-167.
  9. Matsui, I., Omura, N., Yamamoto, T. and Takigawa, Y. (2018). Electrodeposition with intermittent addition of trimethylamine borane to produce ductile bulk nanocrystalline Ni-B alloys. Surface & Coatings Technology, 337, 411-417.
  10. Mehr, M. S., Akbari, A. and Damerchi, E. (2019). Electrodeposited Ni-B/SiC micro- and nanocomposite coatings: A comparative study. Journal of Alloys and Compounds, 782, 477-487.
  11. Mirzamohammadi, S., Khorsand, H. and Aliofkhazraei, M. (2017). Effect of different organic solvents on electrodeposition and wear behavior of Nialumina nanocomposite coatings. Surface & Coatings Technology, 313, 202-213.
  12. Nam, D.-H., Kim, T.-H., Hong, K.-S. and Kwon, H.-S. (2014). Template-Free Electrochemical Synthesis of Sn Nanofibers as High-Performanc