Journals / Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2017 / Cilt: 17 - Sayı: 1

Improving the Safety of Hydraulic Presses with Double Hand Control Systems

Hidrolik Preslerde Çift El Kumanda Sistemleriyle Güvenliğin İyileştirilmesi

Pages
280–291
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The aim of this study is prevent the occupational health and safety by low-cost subsidiary arrangement.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Developments in machine industry and increases in tool types cause so many proplems on occupational health and safety.
📊
Key Findings & Data:These problems may lead to industrial accident due to misuse or insufficient safeguards.
💡
Conclusion & Impact:The aim of this study is prevent the occupational health and safety by low-cost subsidiary arrangement.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Developments in machine industry and increases in tool types cause so many proplems on occupational health and safety. These problems may lead to industrial accident due to misuse or insufficient safeguards. In double-hand systems by-passing one of the valves and using the other one will result in various accidents. In order to solve such proplem by newly developped methods, the double acting cylinder of a hydraulic press or upcut shear must be taken out of order to stop the operation. In the first method, time relays syncronized with a valve prevents the valve holded down long period. In the second method, with the aid of OR (or shuttle valve) valve the cyclinder is retained by a consistent holded down valve. The aim of this study is prevent the occupational health and safety by low-cost subsidiary arrangement.

Özet

Makine endüstrisindeki gelişme ve tezgâh çeşitliliğindeki artış, işçi sağlığı ve iş güvenliği (İSİG) açısından da birtakım sorunlara neden olmaktadır. Bu sorunlar, hatalı kullanımlar ya da tezgâhlardaki yetersiz koruyuculardan kaynaklanan iş kazalarına sebep olmaktadır. Çift el kumandalı sistemlerde, tek valfin devre dışı bırakılarak sadece diğer valfin kullanılması, değişik kazalara sebep olmaktadır. Bu sorunu çözmek için sistemdeki hidrolik pompa yardımıyla hidrolik pres veya giyotin makastaki çift etkili silindir devreden çıkartılarak sistemin durmasını sağlayan yöntemler geliştirilmiştir. Birinci yöntemde, valfle senkronize çalışan zaman röleleri kullanılarak her bir valfin uzun süre basılı tutulması engellenmiştir. İkinci yöntemde ise OR (VEYA?MEKİK) valf yardımıyla sürekli basılı tutulan tek valfin devre dışı bırakılması sağlanarak silindir durdurulmaktadır. Bu çalışmada, düşük maliyetli ek düzenlemelerle yapılan geliştirmeler ile işçi sağlığının korunması ve makine başında iş güvenliği sağlanmıştır ve operatörün kaza riski azaltılmıştır

🔖

Cite This Article

ERGÜR, H. S. (2022). Improving the Safety of Hydraulic Presses with Double Hand Control Systems. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 17 - Sayı: 1, 280–291. https://ajindex.com/articles/430053

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Megep, 2005,
  2. İşçi Sağlığı ve İş Güvenliği, MEB., Mesleki Eğitim ve Öğretim Sisteminin Güçlendirilmesi Projesi, Ankara, 74. Megep, 2006. İş Kazaları ve Meslek Hastalıkları İstatistikleri, Mess Yayınları, Ankara, 59. Öktem, R., 1994.
  3. İşçi Sağlığı ve İş Güvenliği, KOSGEB, Ankara Eğitim Merkezi, 27. Evren K.Ö., 2016.
  4. İş Sağlığı ve Güvenliği El Kitabı, Seçkin Yayıncılık, İstanbul, 352. ILO Introductory Report, 2011. Global Trends and Challenges on Occupational Safety and Health, XIX World Congress on Safety and Health at Work, Istanbul, Turkey, September, 11-15. Kılkış İ., 2016.
  5. İş Sağlığı ve Güvenliği, Dora Yayıncılık, İstanbul, 220. Agca B., 2013. Mekanik ve Hidrolik Preslerin Çalışma Prensibi ve İş Sağlığı ve Güvenliği Yönünden İncelenmesi, İş Müfettişi Yardımcılığı, Çalışma ve Sosyal Güvenlik Bakanlığı İş Teftiş Kurulu Başkanlığı, Ankara, 39. Esposito, A., 1997.
  6. Fluid Power with Applications, Prentice Hall, New Jersey, U.S.A., 365405. Cundiff, S. J., 2002. Fluid Power Circuits and Controls: Fundamentals and Applications, CRC Press, 271-294.
  7. Chapple, P.J., 2003, Principles of Hydraulic Sysyems Design CoxMoor Publishing Company, Oxford, UK, 154170. Zhang G., 2009. Synchronization control system design of 80MN hydraulic press, Proceedings of the 2009 International Workshop on Information Security and Application Qingdao, China, November 21-22.
  8. Zhang, K., Huang, X., Chen, J., and Wang, J., 2011. GTWZ6012 Type aerial work platform hydraulic legs of stress analysis and calculation, Advanced Materials Research, Vol. 308310, 25272530. Elonka S., 1967.
  9. Standard Industrial Hydraulics, Questions and Answers., Mc-Graw Hill Book Company, USA,.304. ANSI B11.19, 2003. Performance Criteria for Safeguarding, American National Standards Institute, Inc., 22-36.
  10. Sullivan, A.J., 1989.
  11. Fluid Power Thery and Applications, Prentice Hall Inc., New Jersey, U.S.A., 459-476.
  12. Miosha, Two Hand Controls, 2004. Michigan Occuptional Safety and Health Administration, General Industry Safety and Health Division, Michigan, USA, 3-6.
  13. Guan, C., and Pan, S., 2008. Adaptive sliding mode control of electrohydraulic system with nonlinear unknown parameters, control engineering practice, Int. J. Adv. Manuf. Technol., 26(1-2), 117-123. Werke D., 1991.
  14. Elektrohidrolik Temel Seviye, Festo Didactic, Esslingen, Germany, 293-295.
  15. Bobrow, J. E., and Lum, K., 1996. Adaptive, high bandwidth control of a hydraulic actuator, Transactions of the ASME, Journal of Dynamic Systems, Measurement and Control, 1