SavedAdd your journal

Journals / Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2019 / Cilt: 19 - Sayı: 1

Production of Glass Fiber Reinforced Hydroxyapatite

Cam Fiberle Güçlendirilmiş Hidroksiapatit Üretimi

Muhammet Furkan ÖZDEM
Atilla EVCİN
Pages
170–176
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Increase in the bending and compressive strength of the glass fiber doped HA is observed to be 20.3% and 23.3% compared to the undoped HA, respectively.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Hydroxyapatite is the most common known bioceramics in biomedical area.
📊
Key Findings & Data:Mixture containing 10 wt% of GF was shaped by hydraulic press.
💡
Conclusion & Impact:Increase in the bending and compressive strength of the glass fiber doped HA is observed to be 20.3% and 23.3% compared to the undoped HA, respectively.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Hydroxyapatite is the most common known bioceramics in biomedical area. The formula of Hydroxyapatite (HA) is Ca₁₀(PO₄)₆(OH)₂. In this study, the effect of glassfiber (GF) to HA was performed. HA was synthesized by sol-gel process. Mixture containing 10 wt% of GF was shaped by hydraulic press. Homogenous powders were sintered at 1100C for 4 hours. Mineralogical properties and particle size and distribution of powders were performed by X-ray diffractometer (XRD) and particle size analyzer. From XRD analysis, the HA powder was obtained as confirmed by the JCPDS file No.09-0432. Then shaped samples were performed by universal testing machine and scanning electron microscope (SEM). 3 point bending strength and compressive strength were improved by GF addition. Increase in the bending and compressive strength of the glass fiber doped HA is observed to be 20.3% and 23.3% compared to the undoped HA, respectively.

Özet

Hidroksiapatit (HA), biyomedikal alanda bilinen en yaygın biyoseramiktir. Hidroksiapatit formülü Ca10(PO4)6(OH)₂ şeklindedir. Bu çalışmada, cam elyafın (CF) HA'e etkisi çalışıldı. HA, sol-jel prosesi ilesentezlendi. Ağırlıkça % 10 oranında CF içeren karışım, hidrolik presle şekillendirildi. Homojen tozlar 4saat 1100C'de sinterlendi. Tozların mineralojik yapısı ve tane boyutu, X-ışını difraktometresi (XRD) vetane boyut analiz cihazı ile yapılmıştır. XRD analizinden HA tozu, JCPDS No.09-0432 kart ile uyumluolarak elde edildi. Daha sonra şekillendirilmiş örnekler taramalı elektron mikroskobu (SEM), ve üniversaltest cihazı ile karakterize edildi. CF ilavesi ile 3 nokta eğilme mukavemeti ve basınç dayanımı iyileştirildi.Cam fiber katkılı HA’nın eğme ve basma mukavemetinde artmanın katkısız HA’ya nazaran sırasıyla %20,3 ve % 23,3 olduğu görülmüştür.

🔖

Cite This Article

ÖZDEM, M. F., EVCİN, A. (2022). Production of Glass Fiber Reinforced Hydroxyapatite. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 19 - Sayı: 1, 170–176. https://ajindex.com/articles/429920

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Águila M.J.R., Reyes-Avendaño J.A., Mendoza M. E., 2017. Structural analysis of metal-doped (Mn, Fe, Co, Ni, Cu, Zn) calcium hydroxyapatite synthetized by a sol-gel microwave-assisted method, Ceramics International, 43, 15, 12705-12709.
  2. Bulina N.V., Chaikina M.V., Prosanov I.Y., Komarova E.G., Sedelnikova M.B., Sharkeev Y.P., Sheikin V.V., 2018. Lanthanum–silicate–substituted apatite synthesized by fast mechanochemical method: Characterization of powders and biocoatings produced by micro–arc oxidation, Materials Science and Engineering: C, 92, 435-446.
  3. Canillas M., Rivero R., García-Carrodeguas R., Barba F., Rodríguez M.A., 2017, Processing of hydroxyapatite obtained by combustion synthesis, Boletín de la Sociedad Española de Cerámica y Vidrio, 56, 5, 237- 242. Chahkandi M., 2017. Mechanism of Congo red adsorption on new sol-gel-derived hydroxyapatite nano-particle. Materials Chemistry and Physics, 202, 340-351.
  4. Chen Z., Liu Y., Mao L., Gong L., Sun W., FengL.,2018. Effect of cation doping on the structure of hydroxyapatite and the mechanism of defluoridation, Ceramics International, 44, 6, 6002-6009.
  5. Daryan S.H., Javadpour J., Khavandi A., Erfan M, 2018. Morphological evolution on the surface of hydrothermally synthesized hydroxyapatite microspheres in the presence of EDTMP. Ceramics International, 44, 16, 19743-19750.
  6. El Idrissi B.C., Yamni K., Yacoubi A., Massit A., 2014. A novel method to synthesize nanocrystalline hydroxyapatite: Characterization with x-ray diffraction and infrared spectroscopy, IOSR Journal of Applied Chemistry, 7, 5 Ver. III., 107-112.
  7. Ergün Y., Başpınar M.S., Taktak Ş., Evcin A., 2012. Titanyum Yüzeyine Sol-Jel Yöntemiyle Hidroksiapatit Kaplanması, Afyon Kocatepe Üniversitesi Fen Bilimleri Dergisi, Özel Sayı, 15-21 Evcin A. and Bohur B.G., 2019 Coating of different silica sources containing hydroxyapatite for Ti6Al4V metal substrate using HVOF technique, Arabian Journal of Geosciences, Volume: 12 Issue: 6, MAR 2019 DOI:10.1007/s12517-019-4302-7
  8. Fang Z, Chormaic S.N., Wang S., Wang X, Yu J., Jiang Y., Qiu J., and Wang P., 2017. Bismuth-doped glass microsphere lasers, Photonic Research, 5, 6, 740-744.
  9. Gnaneshwar P.V., Sudakaran S.V., Abisegapriyan S., Sherine J., Ramakrishna S., Ab.Rahim M.S., Yusoff M.M., Jose R., Venugopal J.R., 2019. Ramification of zinc oxide doped hydroxyapatite biocomposites for the mineralization of osteoblasts, Materials Science and Engineering: C, 96,337-346.
  10. Gshalaev V.S., Demirchan A.C., 2012. Hydroxyapat