SavedAdd your journal

Journals / Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2019 / Cilt: 19 - Sayı: 3

Acidic Dye Removal from Aqueous Solution in Continuous System Column Using Pistachio Shells Activated with H2SO4

H2SO4 ile Aktive Edilen Fıstık Kabuğu Kullanılarak Sürekli Sistem Kolonda Sucul Çözeltiden Asidik Boya Giderimi

Mazen ALZEİN
İlknur ŞENTÜRK
Pages
697–708
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that the adsorption capacity of the prepared adsorbent was positively correlated to the BET surface area.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The purpose of this work is to investigate the adsorption of the Acid Violet 17 which is an acidic dye from aqueous solution in the adsorption column.
📊
Key Findings & Data:The optimum adsorption capacity (qm) obtained in selecting the best conditions (2 cm bed height, 6 mL/min flow rate, and 40 mg/L initial concentration) according to the breakthrough curve data is 13.66 mg/g.
💡
Conclusion & Impact:The results showed that the adsorption capacity of the prepared adsorbent was positively correlated to the BET surface area.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The purpose of this work is to investigate the adsorption of the Acid Violet 17 which is an acidic dye from aqueous solution in the adsorption column. Pistachio shells, an agricultural waste material, were used as column filling material after being activated with acid. The physicochemical properties of activated pistachio shells were characterized by FTIR and BET analysis. The results showed that the adsorption capacity of the prepared adsorbent was positively correlated to the BET surface area. Continuous system adsorption experiments were performed in a fixed column filled with acid-activated pistachio shells. For each of the selected study parameters, the breakthrough curves were plotted as a ratio of the output concentration to the input concentration (Ct/Ci) at certain times. The optimum adsorption capacity (qm) obtained in selecting the best conditions (2 cm bed height, 6 mL/min flow rate, and 40 mg/L initial concentration) according to the breakthrough curve data is 13.66 mg/g. Finally, regeneration of the adsorbent bed with 0.2 M NaOH solution was investigated. The results of the study showed that the adsorption capacity of the adsorbent used after regeneration was low. Data from the breakthrough curves were adapted to the Adams-Bohart, Thomas and Yoon-Nelson models. The results showed that the Thomas model is more suitable for the description of breakthrough curves.

Özet

Bu çalışmanın amacı asidik bir boya olan Asit Viyolet 17 boyasının adsorpsiyon kolonunda arıtılabilirliğiniaraştırmaktır. Tarımsal bir atık materyal olan Antep fıstığı kabukları asitle aktive edildikten sonra kolondolgu materyali olarak kullanılmıştır. Aktive edilen fıstık kabuklarının fizikokimyasal özellikleri FTIR veBET analizleri ile karakterize edilmiştir. Hazırlanan adsorbanın adsorpsiyon kapasitesinin, BET yüzeyalanıyla pozitif ilişkili olduğu görülmüştür. Sürekli sistem adsorpsiyon deneyleri, asitle aktive edilmişfıstık kabuğu ile doldurulan bir sabit kolonda gerçekleştirilmiştir. Seçilen çalışma parametrelerinin herbiri için, çıkış suyu konsantrasyonunun giriş konsantrasyonuna oranına (Ct/Ci) karşılık belirli sürelerdeokunan değerler grafiğe geçirilerek kırılma eğrileri çizilmiştir. Kırılma eğrisi verilerine göre seçilen en iyikoşullarda (2 cm yatak yüksekliği, 6 mL/dk akış hızı ve 40 mg/L başlangıç konsantrasyonu) elde edilenadsorpsiyon kapasitesi (qm) 13,66 mg/g’dır. Son olarak 0,2 M NaOH çözeltisi ile adsorban yatağınınrejenerasyonu incelenmiştir. Çalışma sonuçları kullanılan adsorbanın rejenerasyon sonrası adsorplamakapasitesinin, düşük olduğunu göstermiştir. Kırılma eğrisinden elde edilen veriler Adams-Bohart,Thomas ve Yoon-Nelson modellerine uyarlanmıştır. Sonuçlar Thomas modelin kırılma eğrilerinintanımlanması için daha uygun olduğunu göstermektedir.

🔖

Cite This Article

ALZEİN, M., ŞENTÜRK, İ. (2022). Acidic Dye Removal from Aqueous Solution in Continuous System Column Using Pistachio Shells Activated with H2SO4. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 19 - Sayı: 3, 697–708. https://ajindex.com/articles/429849

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Ansari, R., Seyghali, B., Mohammad-khah, A., & Zanjanchi, M. A. (2012). Highly Efficient Adsorption of Anionic Dyes from Aqueous Solutions Using Sawdust Modified by Cationic Surfactant of Cetyltrimethylammonium Bromide. Journal of Surfactants and Detergents, 15(5), 557–565.
  2. Armagan, B., & Toprak, F. (2013). Optimum Isotherm Parameters for Reactive Azo Dye onto Pistachio Nut Shells: Comparison of Linear and Non-Linear Methods. Pol. J. Environ. Stud., 4(22), 1007–1011.
  3. Ates, A., Reitzmann, Andreas, Hardacre, Christopher, & Yalcin, Huseyin. (2011). Abatement of nitrous oxide over natural and iron modified natural zeolites. Applied Catalysis A: General, 407, 67–75.
  4. Attia, A. A., Girgis, B. S., & Fathy, N. A. (2008). Removal of methylene blue by carbons derived from peach stones by H3PO4 activation: Batch and column studies. Dyes and Pigments, 76(1), 282–289.
  5. Banerjee, M., Basu, R. kumar, & Das, S. K. (2019). Adsorptive removal of Cu(II) by pistachio shell: Isotherm study, kinetic modelling and scale-up designing — continuous mode. Environmental Technology & Innovation, 15, 100419. Banerjee, S., Sharma, G. C., Gautam, R. K., Chattopadhyaya, M. C., Upadhyay, S. N., & Sharma, Y. C. (2016). Removal of Malachite Green, a hazardous dye from aqueous solutions using Avena sativa (oat) hull as a potential adsorbent. Journal of Molecular Liquids, 213, 162–172.
  6. Çelekli, A., Yavuzatmaca, M., & Bozkurt, H. (2010). Modeling the Removal of Reactive Red 120 on Pistachio Husk. CLEAN - Soil, Air, Water, 38(2), 173– 180. Evangelin, C. D., Naren, S. V., & Dharmendirakumar, M. (2012). Comparison of the Surface Features of the Three Chemically Modified Silk Cotton Hull Activated Carbons. Oriental Journal of Chemistry, 28(4), 1761–1768.
  7. Franco, D. S. P., Tanabe, E. H., & Dotto, G. L. (2017). Continuous Adsorption of a Cationic Dye on Surface Modified Rice Husk: Statistical Optimization and Dynamic Models. Chemical Engineering Communications, 204(6), 625–634.
  8. Garg, V. K., Gupta, R., Bala Yadav, A., & Kumar, R. (2003). Dye removal from aqueous solution by adsorption on treated sawdust. Bioresource Technology, 89(2), 121–124.
  9. Gerçel, Ö., Özcan, A., Özcan, A. S., & Gerçel, H. F. (2007). Preparation of activated carbon from a renewable bio-plant of Euphorbia rigida by H2SO4 activation and its adsorption behavior in aqueous solutions. Applied Surface Science, 253(11), 4843–4852.
  10. Hamidpour, M., Hosseini, N., Mozafari, V., & Heshmati Rafsanjani, M. (2018). Removal of Cd(II) and Pb(II) from