SavedAdd your journal

Journals / Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi / 2020 / Cilt: 20 - Sayı: 3

Determination of Boiling Temperatures from Elastic Constants

Elastik Sabitlerden Kaynama Sıcaklığının Belirlenmesi

Tahsin ÖZER
Pages
389–397
Publication Date
2022-10-12
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The boiling temperatures calculated with the help of these relationships were comparedwith the literature data.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:33 cubic and 11 hexagonal materials were selected to determine the boiling temperature of thematerials by regression analysis.
📊
Key Findings & Data:The boiling temperatures of these selected materials were estimatedby regression analysis using the elastic constant and boiling temperature information in the literature.Variance and regression analyze were performed with MINITAB 17 software in 95% confidenceinterval.
💡
Conclusion & Impact:The boiling temperatures calculated with the help of these relationships were comparedwith the literature data.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

33 cubic and 11 hexagonal materials were selected to determine the boiling temperature of thematerials by regression analysis. The boiling temperatures of these selected materials were estimatedby regression analysis using the elastic constant and boiling temperature information in the literature.Variance and regression analyze were performed with MINITAB 17 software in 95% confidenceinterval. Regression coefficients were calculated with 98.9% determination coefficient. As a result ofregression analysis, an empirical relationship between the elastic constants and the boilingtemperature was obtained which predicts boiling temperatures for some cubic and hexagonalmaterials. The boiling temperatures calculated with the help of these relationships were comparedwith the literature data.

Özet

Regresyon analizi ile malzemelerin kaynama sıcaklığını belirlemek için 33 kübik ve 11 hekzagonal malzeme seçilmiştir. Bu seçilen malzemelerin kaynama sıcaklıkları, literatürdeki elastik sabit ve kaynama sıcaklığı bilgileri kullanılarak regresyon analizi ile tahmin edilmiştir. MINITAB 17 yazılımı ile %95 güven aralığında varyans ve regresyon analizi yapılmıştır. Regresyon katsayıları %98,9 tespit katsayısı ile hesaplanmıştır. Regresyon analizi sonucunda, elastik sabitler ile kaynama sıcaklığı arasında ampirik ilişki elde edilmiş ve bazı kübik ve hekzagonal malzemeler için kaynama sıcaklıkları öngörülmüştür. Bu ilişkilerin yardımıyla hesaplanan kaynama sıcaklıkları literatür verileri ile karşılaştırıldı.

🔖

Cite This Article

ÖZER, T. (2022). Determination of Boiling Temperatures from Elastic Constants. Afyon Kocatepe Üniversitesi Fen ve Mühendislik Bilimleri Dergisi, Cilt: 20 - Sayı: 3, 389–397. https://ajindex.com/articles/429751

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (16)

  1. Alers, G.A. and J.R. Neighbours, The elastic constants of zinc between 4.2o and 670 oK, J. Phys. Chem. Solids, 7, 58-64, 1958.
  2. Armstrong, P.E., O.N. Carlson, And J.F. Smith, Elastic constants of thorium single crystals in the range 77-400 oK, J. Apply. Phys., 30, 36-41, 1959.
  3. Bogardus, E.H., Third-order elastic constants of Ge, MgO, and fused SiO2, J. Apply. Phys. 36, 2504-2513, 1965.
  4. Bolef, D.I., Elastic constants of single crystals of the bcc transition elements V, Nb, and Ta, J. Apply. Phys., 32, 100-105, 1961.
  5. Çabuk, S. “Ab initio volume-dependent elastic and lattice dynamics properties of KTaO3”, Phys. Status Solidi B, 247, 1, 93–97, 2010.
  6. Chandrasekhar, B.S., and J.A. Rayne, Elastic constants of indium from 1.4 o to 300 oK, Phys. Rev., 124, 1011-1014, 1961.
  7. Chang, Y.A. and L. Himmel, Elastic constants of cadmium from 300o to 575 oK, J. Apply. Pyhs., 37, 3787-3790, 1966.
  8. Drabble, J.R., and R.E.B. Strathen, The third-order elastic constants of potassium chloride, sodium chloride, and lithium fluoride, Proc. Phys. Soc., 92, 1090-1995, 1967.
  9. Epstein, S.G., and O.N. Carlson, The elastic constants of nickel-copper alloy single crystals, Acta Metal., 13, 487-491, 1965.
  10. Erdoğan, D., “Malzeme bilgisi”, Ankara Üniversitesi Ziraat Fakültesi yayını, Ankara, 2007(Turkish). Erol, H. “SPSS Paket program ile istatiksel very analizi”, Nobel kitabevi, Adana, 2010 (Turkish). Ferris, R.W., M.L. Shepard, and J.F. Smith, Elastic constants of thallium single crystals in the temperature range 4.2 oK-300 oK, J. Appl. Phys., 34, 768-770, 1963.
  11. Fine, M.E., Brown, L.D., Marcus, H.L. “Elastic constant versus melting temperature in metals”, Scripta Metalurgica, 18, 951-956, 1984.
  12. Fisher, E.S. and D. Ever, Temperature dependence of elastic moduli of ruthenium, rhenium, cobalt, dysprosium, and erbium; a study of the elastic anisotropy-phase transformation relationship, Trans. Metal. Soc. AIME, 239, 48-57, 1967.
  13. Fisher, E.S., and C.J. Renken, Single-crystal elastic moduli and the hcp-bcc transformation in Ti, Zr and Hf, Phys. Rev., 135, A482-A494, 1964.
  14. Gerlich, D., Elastic constants of strontium fluoride between 4.2 and 300 oK, Phys. Rev., 136, A1366-A1368, 1964.
  15. Gürsakal, N. “Çıkarımsal istatistik”, 6th edition, DORA, 2014 (Turkish). Liu, C., Chen, X., Ji, G. “First-principles investigations on structural, elastic and electronic properties of SnO2 under pressure”, Computational Materials Science, 50, 1571-1577, 2011.
  16. Macedo, P.M., W. Capps and J.B. Wachtman, Jr., Elastic constant