SavedAdd your journal

Journals / ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE / 2019 / Cilt: 7 - Sayı: 3

The Effect of Sodium Hypophosphite, Temperature and Time in co-deposit Ni-P Coatings on 6061 Series Aluminum Substrate: An Environment-Friendly Alternative to Electrolytic Hard Metal Coatings

Elektrolitik Sert Metal Kaplamaya Alternatif Çevreye Duyarlı Ni-P Kaplamaların 6061 Serisi Alüminyum Altlık Üzerine Akımsız Yöntemle Biriktirilmesinde Sodyum hipofosfit, Sıcaklık ve Zamanın Etkisi

Hasan Algül
Harun Gül
Yusuf Çay
Mehmet Uysal
Ahmet Alp
Abdulkadir Akyol
Oğuzhan Bilaç
Seda Ulu
Pages
442–448
Publication Date
2022-10-11
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In study electroless nickel phosphorus coating the effect of sodium hypophosphite, bath temperature and bath time amount on morphology and properties of the coating was examined.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The autocatalytic electroless depositions, which form an alternative to the electrolytic deposition and do not require any external electrical power, are used in many industrial areas.Electroless nickel based plating has increased attention because of their excellent corrosion, wear, thermal and electrical properties.
📊
Key Findings & Data:They also offer good magnetic properties.
💡
Conclusion & Impact:In study electroless nickel phosphorus coating the effect of sodium hypophosphite, bath temperature and bath time amount on morphology and properties of the coating was examined.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The autocatalytic electroless depositions, which form an alternative to the electrolytic deposition and do not require any external electrical power, are used in many industrial areas.Electroless nickel based plating has increased attention because of their excellent corrosion, wear, thermal and electrical properties. They also offer good magnetic properties. Because of their high mechanical properties electroless nickel coating are used in many areas. Many commercial coatings have been experimented and it is easiest use nickel phosphorus, which is one of the most common. In study electroless nickel phosphorus coating the effect of sodium hypophosphite, bath temperature and bath time amount on morphology and properties of the coating was examined.

Özet

Elektrolitik kaplamalara alternatif oluşturan ve dışarıdan herhangi bir elektrik ihtiyacına gerek duymadan gerçekleşen otokatalitik akımsız kaplamalar birçok endüstriyel alanda kullanılmaktadır. Homojen bir kaplama kalınlığı elde edilmesi, yüksek sertlik, iyi korozyon ve aşınma direncine sahip olması, akımsız kaplamaları oldukça yaygın hale getirmektedir. Ayrıca karmaşık şekilli parçalara da uygulanabilmesi avantajları arasında yer almaktadır. Bu çalışmada akımsız Ni-P kaplamaların sertlik, metalik nikel ve fosfor içerikleri, ısıl işlem sonrası oluşan bileşik türleri ve mikroyapısal özellikleri incelenerek sodyum hipofosfit, sıcaklık ve zaman parametrelerinin etkileri ortaya konmuştur.

🔖

Cite This Article

Algül, H., Gül, H., Çay, Y., Uysal, M., Alp, A., Akyol, A., Bilaç, O., Ulu, S. (2022). The Effect of Sodium Hypophosphite, Temperature and Time in co-deposit Ni-P Coatings on 6061 Series Aluminum Substrate: An Environment-Friendly Alternative to Electrolytic Hard Metal Coatings. ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE, Cilt: 7 - Sayı: 3, 442–448. https://ajindex.com/articles/427287

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. R. C. Özden, “Sıcak Haddelenmiş AZ91 Magnezyum Alaşımı Üzerine Uygulanan Akımsız Ni-P-W Kaplamanın Korozyon ve Aşınma Özellikleri,” Eskişehir Osmangazi Üniversitesi, 2015
  2. P. Sampath Kumar and P. Kesavan Nair, “Studies on crystallization of electroless Ni-P deposits,” J. Mater. Process. Technol., vol. 56, no. 1–4, pp. 511–520, 1996
  3. D. Gökçe, “Akımsız Nikel Fosfor/nikel Bor Dubleks Kaplamaların Korozyon Ve Aşınma Dirençlerinin İncelenmesi,” İstanbul Teknik Üniversitesi, 2012
  4. J. Sudagar, J. Lian, and W. Sha, “Electroless nickel, alloy, composite and nano coatings - A critical review,” Journal of Alloys and Compounds, vol. 571. pp. 183–204, 2013
  5. A. I. Aydeniz, A. Göksenli, G. Dil, F. Muhaffel, C. Calli, and B. Yüksel, “Electroless ni-b-w coatings for improving hardness, wear and corrosion resistance,” Mater. Tehnol., vol. 47, no. 6, pp. 803–806, 2013
  6. S. K. Das and S. Prasamta, “A parametric investigation of the friction performance of electroless Ni-B coatings,” Lubr. Sci., vol. 23, pp. 81–97, 2011
  7. K. N. Srinivasan, R. Meenakshi, A. Santhi, P. R. Thangavelu, and S. John, “Studies on development of electroless Ni–B bath for corrosion resistance and wear resistance applications,” Surf. Eng., vol. 26, no. 3, pp. 153–158, 2010
  8. S. K. Das and P. Sahoo, “Tribological characteristics of electroless Ni-B coating and optimization of coating parameters using Taguchi based grey relational analysis,” Mater. Des., vol. 32, no. 4, pp. 2228–2238, 2011
  9. P. G. Venkatakrishnan, S. S. Mohamed Nazirudeen, and T. S. N. Sankara Narayanan, “Formation and Structural Characterization of Electroless Ni-B-P Ternary Alloy Coatings,” Appl. Mech. Mater., vol. 592–594, pp. 385–390, 2014
  10. A. Zarebidaki and S. R. Allahkaram, “Effect of surfactant on the fabrication and characterization of Ni-PCNT composite coatings,” J. Alloys Compd., vol. 509, no. 5, pp. 1836–1840, 2011
  11. R. Taheri, “Evaluation of Electroless NickelPhosphorus ( EN ) Coatings,” PhD Thesis, no. August 2002, p. 229, 2003
  12. M. Czagány, P. Baumli, and G. Kaptay, “The influence of the phosphorous content and heat treatment on the nano-micro-structure, thickness and micro-hardness of electroless Ni-P coatings on steel,” Appl. Surf. Sci., vol. 423, pp. 160–169, 2017
  13. T. S. N. Sankara Narayanan, I. Baskaran, K. Krishnaveni, and S. Parthiban, “Deposition of electroless NiP graded coatings and evaluation of their corrosion resistance,” Surf. Coatings Technol., vol. 200, no. 11