SavedAdd your journal

Journals / Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi / 2020 / Cilt: 26 - Sayı: 1

Influences of out-of-plane fiber waviness on the curved beam strength of glass fiber composite laminates

Düzlem dışı fiber dalgalanmasının cam elyaf takviyeli tabakalı kompozitlerin kavisli kiriş dayanımı üzerindeki etkileri

Kenan ÇINAR
Pages
99–105
Publication Date
2020-02-20
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Also, the effect of fiber waviness on the strain distribution on the curved section was quantified using Digital Image Correlation (DIC) technique.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In-plane and out-of-plane waviness are inevitable defects in parts that have curved sections made of continuous fiber-reinforced composites.
📊
Key Findings & Data:In this study, an artificial out-of-plane fiber waviness was generated on the outer surface of the curved section of the L-shaped laminates.
💡
Conclusion & Impact:Also, the effect of fiber waviness on the strain distribution on the curved section was quantified using Digital Image Correlation (DIC) technique.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Fiber dalgalanması · Sayısal görüntü Korelasyonu (SGK) · Kusurlar

Abstract

In-plane and out-of-plane waviness are inevitable defects in parts that have curved sections made of continuous fiber-reinforced composites. These defects can be located in the micro, meso (ply level) and macro-scale (part level). In this study, an artificial out-of-plane fiber waviness was generated on the outer surface of the curved section of the L-shaped laminates. The fiber waviness generated was characterized experimentally using micrographs taken from the samples. The effect of fiber waviness on curved beam strength and delamination of the samples were determined through bending tests. Also, the effect of fiber waviness on the strain distribution on the curved section was quantified using Digital Image Correlation (DIC) technique.

Özet

Düzlem içi ve düzlem dışı dalgalanma, sürekli fiber takviyeli kompozitlerden yapılmış kavisli bölgelere sahip parçalarda kaçınılmaz kusurlardır. Bu kusurlar mikro, mezo (katman seviyesi) ve makro ölçekli (parça seviyesi) olabilir. Bu çalışmada, L şekilli laminatların kavisli bölümünün dış yüzeyinde yapay bir düzlem dışı fiber dalgası oluşturulmuştur. Elde edilen fiber dalgalanmaları, numunelerden alınan mikrogörüntüler kullanılarak deneysel olarak karakterize edilmiştir. Fiber dalgalanmaların kavisli kiriş mukavemeti ve numunelerin delaminasyonuna etkisi eğme testleri ile belirlenmiştir. Ayrıca, fiber dalgalanmasının eğri kesitteki birim şekil değiştirme dağılımına etkisi Sayısal Görüntü Korelasyonu (SGK) tekniği kullanılarak ölçülmüştür.

🔖

Cite This Article

ÇINAR, K. (2020). Influences of out-of-plane fiber waviness on the curved beam strength of glass fiber composite laminates. Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 26 - Sayı: 1, 99–105. https://ajindex.com/articles/42102

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Lightfoot J, Wisnom M, Potter K. "A new mechanism for the formation of ply wrinkles due to shear between plies". Composite Part A, 49, 139-147, 2013.
  2. Dodwell T, Butler R, Hunt G. "Out-of-plane ply wrinkling defects during consolidation over an external radius". Composite Science and Technology, 105, 151-159, 2014.
  3. Hallender P, Sjölander J, Akermo M. "Forming induced wrinkling of composite laminates with mixed ply material properties; an experimental study". Composite Part A, 78, 234-245, 2015.
  4. Sjölander J, Hallander P, Akermo M. "Forming induced wrinkling of composite laminates: a numerical study on wrinkling mechanisms". Composite Part A, 81, 41-51, 2016.
  5. Hallander P, Akermo M, Mattei C, Petterson M, Nyman T. "An experimenatal study of mechanisms behind wrinkle development during forming of composite laminates". Composite Part A, 50, 54-64, 2013.
  6. Farnand K, Zobeiry N, Poursartip A, Fernlund G. "Micro-level mechanisms of fiber waviness and wrinkling during hot drape forming of unidirectional prepreg composites". Composites Part A, 103, 168-177, 2017.
  7. Tam A, Gutowski T. "The kinematics for forming ideal aligned fibre composites into complex shapes". Composites Manufacturing, 1(4), 219-228, 1990.
  8. Prodromou AG, Chen J. "On the relationship between shear angle and wrinkling of textile composite preforms". Composite Part A, 28(5), 491-503, 1997.
  9. Harrison P, Abdiwi F, Guo Z, Potluri P, Yu W. "Characterising the shear–tension coupling and wrinkling behaviour of woven engineering fabrics". Composite Part A, 43(6), 903-914, 2012.
  10. Potter K, Khan B, Wisnom M, Bell T, Stevens J. "Variability, fibre waviness and misalignment in the determination of the properties of composite materials and structures". Composite Part A, 39(9), 1343-1354, 2008.
  11. Boisse P, Hamila N, Vidal-Salle E, Dumont F. "Simulation of wrinkling during textile composite reinforcement forming. Influence of tensile, in-plane shear and bending stiffnesses". Composites Science and Technology, 71, 683-692, 2011.
  12. Lee J, Hang S, Yu W, Kang T. "The effect of blank holder force on the stamp forming behavior of non-crimp fabric with a chain stitch". Composite Science and Technology, 67(3), 357-366, 2007.
  13. Kong H, Mouritz A, Paton R. "Tensile extension properties and deformation mechanisms of multiaxial non-crimp fabrics". Composite Structures, 66(1), 249-259, 2004.
  14. Arnold S, Sutcliffe M, Oram W. "Experimental measurement of wrinkle formation during draping of non-crimp fabric". Composites Part A, 82, 159-169, 201