SavedAdd your journal

Journals / Tekstil ve Konfeksiyon / 2006 / Cilt: 16 - Sayı: 2

THE EFFECT OF PLASMA TREATMENT OVER THE ADHESION PROPERTY OF POLYAMİDE 6 FABRICS

PLAZMA İŞLEMİNİN POLİAMİD 6 KUMAŞLARDA ADHEZYON ÖZELLİĞİNE ETKİSİ

Esen ÖZDOĞAN
Pages
128–133
Publication Date
2006-12-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The fiber surface was effectively etched with carbon dioxide and argon plasma treatment

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The effect of plasma treatment on the surface characteristics of polyamide fabrics was investigated.
📊
Key Findings & Data:Plasma surface modifications with carbon dioxide and argon were performed on the polyamide 6 fabrics to improve the adhesion and hidrophylity.
💡
Conclusion & Impact:The fiber surface was effectively etched with carbon dioxide and argon plasma treatment
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Poliamid 6 · plazma · adhezyon

Abstract

The effect of plasma treatment on the surface characteristics of polyamide fabrics was investigated. Plasma surface modifications with carbon dioxide and argon were performed on the polyamide 6 fabrics to improve the adhesion and hidrophylity. The surface morphology of the fiber was observed with scanning electron microscopy. The fiber surface was effectively etched with carbon dioxide and argon plasma treatment

Özet

Bu çalışmada, poliamid kumaşların yüzey özellikleri üzerine, plazma işleminin etkisi araştırılmıştır. Hidrofilite ve adhezyon özelliklerini geliştirmek için poliamid kumaşlara argon ve karbondioksit plazma uygulanmıştır. Yüzey özellikleri SEM mikroskobu ile incelenmiştir. Sonuçlar, poliamid kumaşların yüzey morfolojik özelliklerinin değiştiğini, lif-lif, iplik-iplik sürtünmesi ve yüzey pürüzlülüğünün arttığı göstermektedir

🔖

Cite This Article

ÖZDOĞAN, E. (2006). THE EFFECT OF PLASMA TREATMENT OVER THE ADHESION PROPERTY OF POLYAMİDE 6 FABRICS. Tekstil ve Konfeksiyon, Cilt: 16 - Sayı: 2, 128–133. https://ajindex.com/articles/40334

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Öktem T., Seventekin N., Sentetik liflerin plazma ortamında modifikasyonu, Tekstil Terbiye&Teknik, Mayıs 1998, 62-70 2. Yip J., Chan K., Sin K. M., Lau K. S., Low temperature plasma-treated nylon fabrics, Journal of Materials Processing Technology, Volume 123, Issue 1, 10 April 2002, Pages 5-12 3. X.J.Dai and Mr L. Kviz “Study of Atmospheric and Low Pressure Plasma Modification on the Surface Properties of Synthetic and Natural Fibres” Presented at “An Odyssey in Fibres and Space” Textile Institute 81st World Conference Melbourne, Australia April 2001. 4. Verschuren J., Kiekens P. Plasma Technology For Textiles: Where Are We? http://www.kotonline.com/english_pages/ ana_basliklar/kiekens.asp 5. Krump H., Simor M., Hudec I., Jasso M. ve Luyt A.S., Adhesion Strength Study Between Plasma Treated Polyester Fibers and a Rubber Matrix, Applied Surface Science 240 (2005), 268-274. 6. Kang, J-Y. ve Sarmadi, M., Plasma Treatment of Textiles-Synthetic Polymer-Based Textiles, AATCC Review, November 2004, 29-33. 7. Kunz M., Bauer M., Superior Adhesion with Smart Priming-New Surface Modification Technology, Radtech Report, Novmber-December 2000, 27- 32 8. Oh K. W., Kim S. H., Kim E. A., Improved Surface Chracteristic and the Conductivity of Polyanilin-Nylon 6 Fabrics by Plasma Treatment 9. Lennon P., Espuche E., Sautereau H., Sage D., Influence of microwave plasma treatment on the wettability and adhsive properties of polyamides films with an epoxy resin, International Journal of Adhesion&Adhesives 19, 1999, 273-279 10. http://www.degussahpp.com/eng/products/hotm