Journals / El-Cezeri / 2021 / Cilt: 8 - Sayı: 3

The Effect of Surface Properties of Pumice and Diatomite on Physical and Mechanical Properties of Portland Cement

Pomza ve Diatomitin Yüzey Özelliklerinin Portland Çimentosunun Fiziksel ve Mekanik Özelliklerine Etkisi

Journal
El-Cezeri
Pages
1385–1394
Publication Date
2021-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In addition, it was determined that Portland cement, pumice and diatomite have negative zeta potential values.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In order to understand the interaction mechanism between pozzolanic materials and cement, it is very important to determine the surface properties with the zeta potential of the materials.
📊
Key Findings & Data:Then, the water requirement, setting time, volume expansion and compressive strength values of the reference, 5+5% and 10+10% pumice and diatomite substituted cements were determined.
💡
Conclusion & Impact:In addition, it was determined that Portland cement, pumice and diatomite have negative zeta potential values.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Portland çimento · pomza · diatomit

Abstract

In order to understand the interaction mechanism between pozzolanic materials and cement, it is very important to determine the surface properties with the zeta potential of the materials. In this study, physical, chemical properties and zeta potentials of Portland cement, pumice and diatomite were determined. Then, the water requirement, setting time, volume expansion and compressive strength values of the reference, 5+5% and 10+10% pumice and diatomite substituted cements were determined. The data obtained showed that there were differences in the surface properties of the raw materials used, water demand, volume expansion values, setting times and compressive strengths according to their chemical and physical structure. In addition, it was determined that Portland cement, pumice and diatomite have negative zeta potential values.

Özet

Puzolanik malzemelerin çimento ile arasındaki etkileşim mekanizmasının anlaşılabilmesi açısından, malzemelerin zeta potansiyel ile belirlenen yüzey yüklerinin bilinmesi oldukça önemlidir. Bu amaçla yapılan çalışmada, Portland çimento, pomza ve diatomitin fiziksel ve kimyasal özellikleri ile zeta potansiyelleri belirlenmiştir. Daha sonra referans ve %5+5 ve %10+10 pomza ve diatomit ikameli çimentoların su ihtiyacı, priz süresi, hacim genleşme ve basınç dayanımı değerleri elde edilmiştir. Bu değerlere göre, hammaddelerin yüzey yükleri, kimyasal ve fiziksel yapısına göre su ihtiyacı, hacim genleşme değerleri, priz süreleri ve basınç dayanımlarında farklılıklar meydana geldiğini göstermiştir. Ayrıca Portland çimentosu, pomza ve diatomitin negatif zeta potansiyel değerine sahip olduğu belirlenmiştir.

🔖

Cite This Article

PINARCI, İ., KOÇAK, Y. (2021). The Effect of Surface Properties of Pumice and Diatomite on Physical and Mechanical Properties of Portland Cement. El-Cezeri, Cilt: 8 - Sayı: 3, 1385–1394. https://ajindex.com/articles/397768

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Okoye F.N., Durgaprasad J., Singh N.B., “Effect Of Silica Fume On The Mechanical Properties Of Fly Ash Based–Geopolymer Concrete”, Ceramics International, 2016, 42: 3000–3006
  2. Kocak Y., Nas S., “The Effect Of Using Fly Ash On The Strength And Hydration Characteristics Of Blended Cements”, Construction And Building Materials, 2014, 73: 25–32
  3. Zhao H., Sun W., Wu X., Gao Bo., “The Properties Of The Self–Compacting Concrete With Fly Ash And Ground Granulated Blast Furnace Slag Mineral Admixtures”, Journal Of Cleaner Production, 2015, 95: 66–74
  4. Zhengqi L., “Drying Shrinkage Prediction Of Paste Containing Meta–Kaolin And Ultrafine Fly Ash For Developing Ultra–High Performance Concrete”, Materials Today Communications, 2016, 6: 74–80
  5. Kocak Y., “Effects of metakaolin on the hydration development of Portland–composite cement”, Journal of Building Engineering, 2020, 31: 101419
  6. Zhu H., Liang G., Zhang Z., Wu Q., Du J., "Partial replacement of metakaolin with thermally treated rice husk ash in metakaolin–based geopolymer" Construction and Building Materials, 2019, 221: 527–538
  7. Wen N., Zhao Y., Yu Z., Liu M., “A sludge and modified rice husk ash–based geopolymer: synthesis and characterization analysis” Journal of Cleaner Production, 2019, 226: 805–814
  8. Koçak Y., Dorum A., Yılmaz B., Uçar A., “Trasın Çimento Yüzey Özelliğine, Hidratasyona Ve Basınç Dayanımına Etkisi”, E–Journal Of New World Sciences Academy Technological Applied Sciences, 2010, 5 (1): 1–14
  9. Cabrera–Luna K., Maldonado–Bandala E. E., Nieves–Mendoza D., Castro–Borges P., García J. E., “Novel low emissions supersulfated cements of pumice in concrete; mechanical and electrochemical characterization”, Journal of Cleaner Production, 2020, 272: 122520
  10. Yıldız K., Dorum A., Koçak Y., “Pomza Zeolit Ve Cem I Çimentosunun Minerolojik Moleküler Elektrokinetik Ve Termal Uyumunun Yüksek Dayanımlı Betona Etkisinin Araştırılması”, Journal Of The Faculty Of Engineering And Architecture Of Gazi University, 2010, 25 (4): 867–879
  11. Kocak Y., Tascı E., Kaya, U., “The Effect Of Using Natural Zeolite On The Properties And Hydration Characteristics Of Blended Cements”, Construction And Building Materials, 2013, 47: 720–727
  12. Gerengi H., Kocak Y., Jażdżewska A., Kurtay M., Durgun H., “Electrochemical İnvestigations On The Corrosion Behaviour Of Reinforcing Steel In Diatomite– And Zeolite–Containing Concrete Exposed To Sulphuric Acid”, Construction And Building Materials, 201