Journals / Endüstri Mühendisliği / 2022 / Cilt: 33 - Sayı: 1

A METHOD PROPOSAL FOR THE FOCUSED IMPROVEMENT PILLAR IN WORLD CLASS MANUFACTURING AND A CASE STUDY

DÜNYA KLASINDA ÜRETİM ODAKLANMIŞ İYİLEŞTİRME SÜTUNU İÇİN METODOLOJİ ÖNERİSİ VE BİR UYGULAMA

Pages
243–264
Publication Date
2022-04-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It has been observed that both time and cost advantages have been obtained with the focused improvement study using the proposed methodology.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, seven steps of the focused improvement pillar were applied in a process in the assembly line of a compressor manufacturing company.
📊
Key Findings & Data:In this application, kaizen points were determined with the 3M method, then various improvements were proposed with loss analysis, and the gains of these improvements were determined.
💡
Conclusion & Impact:It has been observed that both time and cost advantages have been obtained with the focused improvement study using the proposed methodology.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Dünya klasında üretim · odaklanmış iyileştirme · kaizen

Abstract

In this study, seven steps of the focused improvement pillar were applied in a process in the assembly line of a compressor manufacturing company. In this application, kaizen points were determined with the 3M method, then various improvements were proposed with loss analysis, and the gains of these improvements were determined. In addition, a methodology has been proposed to avoid method confusion in the implementation of the focused improvement. With this methodology, the time spent on method research has been minimized, and the process has become more systematic. As a result of the study, some improvement suggestions were presented to reduce the cycle time in the assembly process and eliminate the operators' inefficiencies in the factors affecting the operators' ergonomic level, and the time and cost savings of these suggestions were evaluated. It has been observed that both time and cost advantages have been obtained with the focused improvement study using the proposed methodology.

Özet

Bu çalışmada kompresör imal edilen bir işletmenin montaj hattında yer alan bir süreçte, odaklanmış iyileştirme sütununun yedi adımı uygulanmıştır. Bu uygulamada 3M metodu ile kaizen noktaları tespit edilip daha sonra kayıp analizi ile çeşitli iyileştirmeler önerilmiş ve bu iyileştirmelerin kazanımları belirlenmiştir. Ayrıca odaklanmış iyileştirme uygulanmasında, uygulamada görülen metot karmaşasının önüne geçilmesi için bir metodoloji önerilmiştir. Bu metodoloji ile metot araştırması için harcanan süre minimize edilmiş ve süreç daha sistematik hale getirilmiştir. Çalışma sonucunda montaj sürecinde çevrim süresini minimum seviyeye indirecek ve operatörlerin ergonomik seviyesini etkileyecek etmenler üzerindeki ve süreçteki operatörlerin verimsizliklerini ortadan kaldıracak iyileştirme önerileri sunulmuş ve bu önerilerin süre ve maliyet kazancı değerlendirmeleri yapılmıştır. Önerilen metodolojiyi kullanan odaklanmış iyileştirme çalışması ile hem süre hem de maliyet avantajı elde edildiği görülmüştür.

🔖

Cite This Article

EROZAN, İ., SAYAN, Z., BEŞKARDEŞLER, M. (2022). A METHOD PROPOSAL FOR THE FOCUSED IMPROVEMENT PILLAR IN WORLD CLASS MANUFACTURING AND A CASE STUDY. Endüstri Mühendisliği, Cilt: 33 - Sayı: 1, 243–264. https://ajindex.com/articles/396852

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Abrardı, L., Perıno, D. D. & Roscıo, F. (2019). The base of the world class manufacturing: cost deployment. experience at magneti marelli's plant in venaria reale (to). (Master's thesis). Politecnico Di Torino, Torino. Agnese, M., Atzetni, E., Prisinzano F. & Rapegno, V. (2018). Increase of plant performance according to world class manufacturing methodology through implementation of a technical knowledge database and reduction of minor stoppages (Master's thesis). Politecnico Di Torino, Torino. Akıl B. (2013). Kamu sektöründe 5S ve kaizen uygulamaları (Yüksek Lisans Tezi). Dokuz Eylül Üniversitesi,
  2. İzmir.
  3. Alessandro, C. & Riasat, Q. (2020). World class manufacturing and its applications (lean manufacturing) (Thesis).Politecnico Di Torino, Torino. Alves, A. C., Carneiro, P., Ferreira, A. C., Leao, C. & Maia, L. C. (2019). A symbiotic relationship between lean production and ergonomics: insights from industrial engineering final year projects. International Journal of Industrial Engineering and Management (IJIEM), 10(4). Doi: 10.24867/IJIEM-2019-4-244.
  4. Anggraeni, N. F., Awaliyah, A. R. & Fhadillah, I. (2020). Waste analysis Dı Pt. XYZ uses “8 waste”. Jurnal Ilmiah Teknologi Informasi Terapan, 6(2), 157-162. Doi: 10.33197/jitter. Aydan, M. ve Kaya, S. (2017). Hata türü ve etkileri analizi (HTEA): üniversite hastanesinde bir uygulama. Hacettepe Sağlık İdaresi Dergisi, 20(4), 475-502. Erişim Adresi: https://dergipark.org.tr/tr/download/article-file/552152.
  5. Ayuvinda, N. R., Justitia, A. & Semiati, R. (2019). Customer satisfaction analysis of online taxi mobile apps. Journal of Information Systems Engineering and Business Intelligence, 5(1). Doi: 10.20473/jisebi.5.1.85-92.
  6. Baboli, A., Ebrahimi, M. & Rother, E. (2019). The evolution of world class manufacturing toward industry 4.0: a case study in the automotive industry. IFAC Papers Online, 52-10, 188-194. Doi: https://doi.org/10.1016/j.ifacol.2019.10.021.
  7. Bhushan, R., Borkar, M. G., Kumar, S., Kumar, V., Raj, M. & Swaroop, S. (2017). Kobetsu kaizen losses analysis to enhance the overall plant effectiveness in steel manufacturing industry–a case study at JSPL. International Research Journal of Engineering and Technology (IRJET), 4(12), 245-251. Retrieved from: https://www.irjet.net/archives/V4/i12/IRJET-V4I1245.pdf.
  8. Bilgin Sarı, E. (2018). Üretim süreçlerinde sürekli iyileştirme çalışmalarının önemi: bir kaizen uygulaması örneği, İzmir İktisadi ve İdari Bilimler Konferansı,2556-2578,
  9. İzmir.
  10. Bilgin Sarı, E. (2018