SavedAdd your journal

Journals / El-Cezeri / 2021 / Cilt: 8 - Sayı: 3

Preparation and Characterization of 2,3-Dialdehyde Cellulose/Polylactic Acid Biodegradable Blends

2,3-Dialdehit Selüloz/Polilaktik Asit Biyobozunur Blendlerinin Hazırlanması ve Karakterizasyonu

Kamil ŞİRİN
Ü.gülsüm SEZİŞ
Emriye AY
Journal
El-Cezeri
Pages
1158–1169
Publication Date
2021-09-30
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Besides, SEM images of the polymer blends obtained were interpreted.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In recent years, the demand for naturally derived synthetic materials to protect the environment has increased.
📊
Key Findings & Data:In addition, in recent years, research has increased the use of polylactic acid (PLA) instead of petroleum-based polymers.
💡
Conclusion & Impact:Besides, SEM images of the polymer blends obtained were interpreted.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Blend polimerler · dialdehit selüloz · polilaktik asit

Abstract

In recent years, the demand for naturally derived synthetic materials to protect the environment has increased. Cellulosic polymers are renewable in nature, biodegradable, eco-friendly, and they possess high strength and stiffness. In addition, in recent years, research has increased the use of polylactic acid (PLA) instead of petroleum-based polymers. In this study, biodegradable dialdehyde cellulose (DAC)/polylactic acid (PLA) blends were prepared. DAC was prepared by peroxide oxidation from microcrystalline cellulose. Firstly, DAC was blended with PLA. Although DAC has hydrophilic properties, PLA is known to have hydrophobic properties. Therefore, polyethylene glycol (PEG) was added to increase compatibility between PLA and DAC. The blends were characterized by infrared spectroscopy and thermal analysis (TGA and DSC) techniques. Besides, SEM images of the polymer blends obtained were interpreted.

Özet

Son yıllarda çevreyi korumak için doğal olarak türetilmiş sentetik malzemelere olan talep artmıştır. Selülozik polimerler doğada yenilenebilir, biyolojik olarak parçalanabilir, çevre dostudur ve yüksek mukavemet ve sertliğe sahiptirler. Ayrıca son yıllarda araştırmalar petrol bazlı polimerler yerine polilaktik asit (PLA) kullanımını artırmıştır. Bu çalışmada, biyolojik olarak parçalanabilen dialdehit selüloz (DAC) / polilaktik asit (PLA) karışımları hazırlandı. DAC, mikrokristalin selülozdan peroksit oksidasyonu ile elde edildi. İlk olarak DAC, PLA ile harmanlandı. DAC hidrofilik özelliklere sahip olmasına rağmen, PLA'nın hidrofobik özelliklere sahip olduğu bilinmektedir. Bu nedenle, PLA ve DAC arasındaki uyumluluğu artırmak için polietilen glikol (PEG) eklendi. Harmanlar, kızılötesi spektroskopi ve termal analiz (TGA ve DSC) teknikleriyle karakterize edildi. Ayrıca elde edilen polimer karışımlarının SEM görüntüleri yorumlandı.

🔖

Cite This Article

ŞİRİN, K., SEZİŞ, Ü., AY, E. (2021). Preparation and Characterization of 2,3-Dialdehyde Cellulose/Polylactic Acid Biodegradable Blends. El-Cezeri, Cilt: 8 - Sayı: 3, 1158–1169. https://ajindex.com/articles/393364

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Mülhaupt, R., “Green Polymer Chemistry and Bio-based Plastics: Dreams and Reality”, Macromol. Chem. Phys., 2013, 214, 159-174.
  2. Luckachan, G. E., and Pillai, C. K. S., “Biodegradable Polymers-A Review on Recent Trends and Emerging Perspectives”, J. Polym. Environ., 2011, 19, 637-676.
  3. Vroman, I., and Tighzert, L., “Biodegradable Polymers”, Materials, 2009, 2, 307-344.
  4. Song, J. H., Murphy, R. J., Narayan, R., Davies, G. B. H., “Biodegradable and compostable alternatives to conventional plastics”, Phil. Trans. R. Soc. B., 2009, 364, 2127-2139.
  5. Mazumder, M. A., Jafar, Sheardown, H., Al-Ahmed, A., (Eds.) “Functional Polymers” Springer International Publishing, ISBN 978-3-319-95986-3,
  6. Cham, Switzerland, 2019.
  7. Klemm, D., Heublein, B., Fink, H. P., Bohn, A., “Cellulose: Fascinating Biopolymer and Sustainable Raw Material”, Angew. Chem. Int. Ed., 2005, 44, 3358-3393.
  8. Zhong, Y., Godwin, P., Jin, Y., Xio, H., “Biodegradable polymers and green-based antimicrobial packaging materials: A mini-review”, Advanced Industrial and Engineering Polymer Research, 2020, 3, 27-35.
  9. Fan, Q. G., Lewis, D. M., Tapley, K. N., “Characterization of Cellulose Aldehyde Using Fourier Transform Infrared Spectroscopy”, Journal of Applied Polymer Science, 2001, Vol. 82, 1195-1202.
  10. Tavakolian, M., Jafari, S. M., van de Ven, T. G. M., “A Review on Surface-Functionalized Cellulosic Nanostructures as Biocompatible Antibacterial Materials”, Nano-Micro Lett., 2020, 12, 73. Dang, X., Liu, P., Yang, M., Deng, H., Shan, Z., Zhen, W., “Production and characterization of dialdehyde cellulose through green and sustainable approach”, Cellulose, 2019, 26, 9503-9515.
  11. Plappert, S. F., Quraishi, S., Pircher, N., Mikkonen, K. S., Veigel, S., Klinger, K. M., Potthast A., Rosenau, T., and Liebner, F. W., “Transparent, Flexible, and Strong 2,3-Dialdehyde Cellulose Films with High Oxygen Barrier Properties”, Biomacromolecules, 2018, 19, 2969-2978.
  12. Ramanjaneyulu, B., Venkatachalapathi, N., Prasanthi, G., “Tensile and Micro Structural Properties Analysis of Biodegradable Polymer Blends”, International Journal of Recent Technology and Engineering (IJRTE), 2019, Vol-8, Issue-2, 1866-1868.
  13. Hu, Y., Daoud, W. A., Cheuk, K. K. L., and Lin, C. S. K., “Newly Developed Techniques on Polycondensation, Ring-Opening Polymerization and Polymer Modification: Focus on Poly(Lactic Acid)”, Materials, 2016, 9, 133, 1-14.
  14. Somphol, W., Lampang, T. N., Prapainainar, Paweena., Sae-Oui, P., Loykulnant, S., Seubsai, A., Dittanet, P., “Effect