SavedAdd your journal

Journals / Teknik Dergi / 2022 / Cilt: 33 - Sayı: 2

Preparation and Performance Testing of SBS Modified Bitumens Reinforced with Halloysite and Sepiolite Nanoclays

Dilay UNCU
Ali TOPAL
Özgür SEYDİBEYOĞLU
Pages
11661–11680
Publication Date
2022-03-01
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Furthermore, rutting performance of samples was measured with zero shear viscosity (ZSV) and multi stress creep recovery (MSCR) test methods.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, halloysite and sepiolite nanoclays were used to reinforce SBS modified bitumens.
📊
Key Findings & Data:The polymer additive SBS was added into base bitumen at 3% and 5%, the nanoclay additives were added into polymer modified bitumen at 2% and 4% ratios.
💡
Conclusion & Impact:Furthermore, rutting performance of samples was measured with zero shear viscosity (ZSV) and multi stress creep recovery (MSCR) test methods.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Polymer modified bitumen · Halloysite · Sepiolite

Abstract

In this study, halloysite and sepiolite nanoclays were used to reinforce SBS modified bitumens. The nanoclays used are different from the materials in the literature and have properties such as easy to find, economical and available from local sources. The mixing parameters were determined before production process. The polymer additive SBS was added into base bitumen at 3% and 5%, the nanoclay additives were added into polymer modified bitumen at 2% and 4% ratios. The morphological structures were investigated under fluorescence microscope. Physical and rheological properties of the samples were compared. The phase separation cases were investigated by storage stability test. Furthermore, rutting performance of samples was measured with zero shear viscosity (ZSV) and multi stress creep recovery (MSCR) test methods.

Özet

In this study, halloysite and sepiolite nanoclays were used to reinforce SBS modified bitumens. The nanoclays used are different from the materials in the literature and have properties such as easy to find, economical and available from local sources. The mixing parameters were determined before production process. The polymer additive SBS was added into base bitumen at 3% and 5%, the nanoclay additives were added into polymer modified bitumen at 2% and 4% ratios. The morphological structures were investigated under fluorescence microscope. Physical and rheological properties of the samples were compared. The phase separation cases were investigated by storage stability test. Furthermore, rutting performance of samples was measured with zero shear viscosity (ZSV) and multi stress creep recovery (MSCR) test methods.

🔖

Cite This Article

UNCU, D., TOPAL, A., SEYDİBEYOĞLU, Ö. (2022). Preparation and Performance Testing of SBS Modified Bitumens Reinforced with Halloysite and Sepiolite Nanoclays. Teknik Dergi, Cilt: 33 - Sayı: 2, 11661–11680. https://ajindex.com/articles/386381

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Polacco, G., Stastna, J., Biondi, D., Zanzotto, L., Relation between polymer architecture and nonlinear viscoelastic behavior of modified asphalts, Current Opinion in Colloid & Interface Science, 11(4), 230-245, 2006.
  2. Polacco G., Kříž, P., Filippi, S., Stastna, J., Biondi, D., Zanzotto, L., Rheological properties of asphalt/SBS/clay blends, European Polymer Journal, 44(11), 3512-3521, 2008.
  3. Ahmedzade, P., Fainleib, A., Günay, T., Grigoryeva, O., Geri Dönüştürülmüş Atık Polipropilenin Bitümlü Bağlayıcılarda Kullanılması, Teknik Dergi, 456, 7497-7513, 2016.
  4. Aglan, H., Othman, A., Figueroa, L., Rollings, R., Effect of styrene-butadiene-styrene block copolymer on fatigue crack propagation behavior of asphalt concrete mixtures, Transportation Research Record, 1417, 178-86, 1993.
  5. Kumar P., Chandra S., Bose S., Strength characteristics of polymer modified mixes, International Journal of Pavement Engineering, 7(1), 63-71, 2006.
  6. Tayfur, S., Ozen, H., Aksoy, A., Investigation of rutting performance of asphalt mixtures containing polymer modifiers, Construction and Building Materials, 21(2), 328-37, 2007. Bulatović, V. O., Rek, V., Marković, K. J., Effect of polymer modifiers on the properties of bitumen, Journal of Elastomers & Plastics, 46(5), 448-469, 2014.
  7. Alatas, T., Yilmaz, M., Kuloglu, N., Cakiroglu, M., Geckil, T., Investigation of Shear Complex Modulus and Phase Angle Values of Short and Long-term Aged Polymer Modified Bitumens at Different Frequencies, KSCE Journal of Civil Engineering, 18(7), 2093-2099, 2014.
  8. Galooyak, S. S., Dabir, B., Nazarbeygi, A. E., Moeini, A., Rheological properties and storage stability of bitumen/SBS/montmorillonite composites, Construction and Building Materials, 24(3), 300-307, 2010.
  9. Golestani, B., Nejad, F. M., Galooyak, S. S., Performance evaluation of linear and nonlinear nanocomposite modified asphalts, Construction and Building Materials, 35, 197-203, 2012.
  10. Topal. A., Sureshkumar, M. S., Sengoz, B., Polacco, G., Rheology and microstructure of polymer-modified asphalt nanocomposites, International Journal of Materials Research, 103(10), 1271-1276, 2012.
  11. Yao, H., You, Z., Li, L. Goh, S. W., Lee, C. H., Yap, Y. K., Rheological properties and chemical analysis of nanoclay and carbon microfiber modified asphalt with Fourier transform infrared spectroscopy, Construction and Building Materials, 38, 327-337, 2013.
  12. Jasso, M., Bakos, D., MacLeod, D., Zanzotto, L., Preparation and properties of conventional asphalt modified by physica