Journals / El-Cezeri / 2022 / Cilt: 9 - Sayı: 1

Investigation of the Potential of Economical Fe@Ni Alloys Produced by Ball Milling as Counter Electrode in Dye-Sensitized Solar Cells

Bilyalı Öğütücü ile Üretilen Ekonomik Fe@Ni Alaşımların Boya Duyarlı Güneş Hücrelerinde Karşıt Elektrot Potansiyelinin Araştırılması

Journal
El-Cezeri
Pages
24–34
Publication Date
2022-01-31
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This study paves the way for the evaluation of metal-based and cost-effective alloy materials as alternative counter electrode materials in DSSC applications.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Dye sensitized solar cells (DSSCs) with facile production technique and low cost are among the most investigated third generation solar cells.
📊
Key Findings & Data:In this study, different proportions of Fe@Ni alloys have been prepared and 3.3% of power conversion efficiency was achieved with Fe:Ni (0.25:0.75) alloy.
💡
Conclusion & Impact:This study paves the way for the evaluation of metal-based and cost-effective alloy materials as alternative counter electrode materials in DSSC applications.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Boya duyarlı güneş hücresi (DSSC) · Karşıt elektrot · Alaşımlar

Abstract

Dye sensitized solar cells (DSSCs) with facile production technique and low cost are among the most investigated third generation solar cells. However, several alternative materials have been investigated as alternative due to high cost and low electrochemical stability of platinum (Pt) material being used as counter electrode in DSSC architecture. In this study, iron@nickel (Fe@Ni) alloys as alternative to Pt material were produced by cost-effective and facile applied ball milling method, and used as counter electrode in the cell architecture. In this study, different proportions of Fe@Ni alloys have been prepared and 3.3% of power conversion efficiency was achieved with Fe:Ni (0.25:0.75) alloy. Although it is slightly lower than the efficiency value of the Pt counter electrode-based reference cell (4.7%), considering the approximate cost values, it is seen that Fe@Ni alloys offer a significant potential for the commercialization of DSSC technology. This study paves the way for the evaluation of metal-based and cost-effective alloy materials as alternative counter electrode materials in DSSC applications.

Özet

Boya duyarlı güneş hücreleri (DSSCs) sahip oldukları kolay üretim tekniği ve uygun maliyeti ile son yılların en çok araştırılan üçüncü nesil güneş hücreleri arasında yer almaktadır. DSSC mimarisinde karşıt elektrot olarak kullanılan platin (Pt) malzemesi yüksek maliyet ve düşük elektrokimyasal kararlılık nedeniyle alternatif karşıt elektrot malzeme arayışlarına neden olmuştur. Bu çalışmada, Pt malzemesine alternatif olarak demir@nikel (Fe@Ni) alaşımları uygun maliyetli ve kolay uygulanabilir bir yöntem olan bilyalı öğütme yöntemi ile üretilmiş ve hücre mimarisinde karşıt elektrot olarak kullanılmıştır. Farklı oranlarda Fe@Ni alaşımlarının üretildiği çalışmada, Fe:Ni (0,25:0,75) alaşımıyla üretilen hücrenin güç dönüşüm verimi %3,3 olarak elde edilmiştir. Bu değer Pt karşıt elektrot tabanlı referans hücrenin verim değerinden (%4,7) kısmen düşük olsa da yaklaşık maliyet değerleri göz önünde bulundurulduğunda Fe@Ni alaşımların DSSC teknolojisinin ticarileşmesi yolunda önemli bir potansiyel sunduğu görülmektedir. Yapılan bu çalışma, metal-bazlı ve uygun maliyetli alaşım malzemelerinin DSSC uygulamalarında alternatif karşıt elektrot malzemesi olarak değerlendirilmesinin önünü açmaktadır.

🔖

Cite This Article

AKİN, S., AKMAN, E. (2022). Investigation of the Potential of Economical Fe@Ni Alloys Produced by Ball Milling as Counter Electrode in Dye-Sensitized Solar Cells. El-Cezeri, Cilt: 9 - Sayı: 1, 24–34. https://ajindex.com/articles/378103

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. . Wagner, P. L., "General Energetics - Energy in the Biosphere and Civilization - Smil,V". Geogr Rev, 1993, 83 (1), 110-112. [2]. Sil, D.; Chakrabarti, S., "Photocatalytic Degradation of PVC-ZnO Composite Film Under Tropical Sunlight and Artificial UV Radiation: A Comparative Study". Sol Energy, 2010, 84 (3), 476-485. [3]. Akin, S., "Hysteresis-Free Planar Perovskite Solar Cells with a Breakthrough Efficiency of 22% and Superior Operational Stability over 2000 h". Acs Appl Mater Inter, 2019, 11 (43), 39998-40005. [4]. Liao, C. Y.; Hsiao, Y. T.; Tsai, K. W.; Teng, N. W.; Li, W. L.; Wu, J. L.; Kao, J. C.; Lee, C. C.; Yang, C. M.; Tan, H. S.; Chung, K. H.; Chang, Y. M., "Photoactive Material for Highly Efficient and All Solution-Processed Organic Photovoltaic Modules: Study on the Efficiency, Stability, and Synthetic Complexity". Sol Rrl, 2021, 5 (3), 2000749. [5]. Wang, A.; Chang, N. L.; Sun, K. W.; Xue, C. W.; Egan, R. J.; Li, J. J.; Yan, C.; Huang, J. L.; Rong, H.; Ramsden, C.; Hao, X. J., "Analysis of Manufacturing cost and Market Niches for Cu2ZnSnS4 (CZTS) Solar Cells". Sustain Energ Fuels, 2021, 5 (4), 1044-1058. [6]. Akin, S.; Arora, N.; Zakeeruddin, S. M.; Gratzel, M.; Friend, R. H.; Dar, M. I., "New Strategies for Defect Passivation in High-Efficiency Perovskite Solar Cells". Adv Energy Mater, 2020, 10 (13), 1903090. [7]. Shalan, A. E.; Akman, E.; Sadegh, F.; Akin, S., "Efficient and Stable Perovskite Solar Cells Enabled by Dicarboxylic Acid-Supported Perovskite Crystallization". J Phys Chem Lett, 2021, 12 (3), 997-1004. [8]. Akin, S.; Akman, E.; Sonmezoglu, S., "FAPbI3-Based Perovskite Solar Cells Employing Hexyl-Based Ionic Liquid with an Efficiency Over 20% and Excellent Long-Term Stability". Adv Funct Mater, 2020, 30 (28), 2002964. [9]. Akman, E.; Akin, S., "Poly(N,N '-bis-4-butylphenyl-N,N '-bisphenyl)benzidine-Based Interfacial Passivation Strategy Promoting Efficiency and Operational Stability of Perovskite Solar Cells in Regular Architecture". Adv Mater, 2021, 33 (2), 2006087. [10]. Akman, E.; Shalan, A. E.; Sadegh, F.; Akin, S., "Moisture-Resistant FAPbI3 Perovskite Solar Cell with 22.25 % Power Conversion Efficiency through Pentafluorobenzyl Phosphonic Acid Passivation". Chemsuschem, 2021, 14 (4), 1176-1183. [11]. Akman, E.; Altintas, Y.; Gulen, M.; Yilmaz, M.; Mutlugun, E.; Sonmezoglu, S., "Improving Performance and Stability in Quantum Dot-Sensitized Solar Cell through Single Layer Graphene/Cu2S Nanocomposite Counter Electrode". Renew