Journals / Atatürk Üniversitesi Ziraat Fakültesi Dergisi / 1994 / Cilt: 25 - Sayı: 2

TOPRAK İŞLEMEDE FARKLI İLERLEME HIZLARININ PULLUK ÇEKİ KUVVETİNE VE YAKIT TÜKETİMİNE ETKİLERİ ÜZERİNE BİR ARAŞTIRMA / A RESEARCH ON EFFECTS OF DIFFERENT GROUND SPEEDS ON THE DRAWBAR FORCE AND FUEL CONSUMPTÎON OF PLOUGH IN TILLAGE

Pages
—
Publication Date
2011-01-03
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Plough drawbar force and fuel comsumption vseremeasuredwith the aid of data acquisition system.The highest dawbar force was obtained as 13.3 kN at the ground speed of 75kmlh, \vhile the lowest drawbar force was obtained as 9.4 kN at the ground speed of35 kmlh.The highest fuel comsumption of 35.3 Jlha was foundfor the ground speed of35 kmlh, while the lowest one of 26.0 llha was found for the ground speed of 5 kmlh.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:ÖZET : Araştırmada, dört gövdeli kültürform tipi bir pullukla 18 cmderinlikte toprak işlemesi yapılmıştır.
📊
Key Findings & Data:İlerleme hızları 35 km/h, 5 km/h, 65 kmlh ve75 kmlh olarak seçilmiştir.
💡
Conclusion & Impact:Plough drawbar force and fuel comsumption vseremeasuredwith the aid of data acquisition system.The highest dawbar force was obtained as 13.3 kN at the ground speed of 75kmlh, \vhile the lowest drawbar force was obtained as 9.4 kN at the ground speed of35 kmlh.The highest fuel comsumption of 35.3 Jlha was foundfor the ground speed of35 kmlh, while the lowest one of 26.0 llha was found for the ground speed of 5 kmlh.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

ÖZET : Araştırmada, dört gövdeli kültürform tipi bir pullukla 18 cmderinlikte toprak işlemesi yapılmıştır. İlerleme hızları 35 km/h, 5 km/h, 65 kmlh ve75 kmlh olarak seçilmiştir. Seçilen bu hızlarda pulluk çeki kuvveti ve yakıt tüketimideğerleri Ölçülmüştür.En yüksek çeki kuvveti 13.3 kN'la 7.5 km/h'lık ilerleme hızında, en düşükçeki kuvveti ise 9.4 kN'la 3 5 km/h'lık ilerleme hızında elde edilmiştir.En yüksek yakıt tüketimi 35.3 1/ha'la 3.5 km/h hızda ve en düşük yakıttüketimi 26.0 1/ha'la 5 km/h'lık ilerleme hızında kaydedilmiştir.A RESEARCH ON EFFECTS OF DIFFERENT GROUND SPEEDS ONTHE DRAWBAR FORCE AND FUEL CONSUMPTÎON OF PLOUGHIN TILLAGE SUMMARY : in this study, a moldboard plough mth four bottoms wasused in tillage at the depth of 18 cm Ground speeds of 35 kmlh, 5 km/h, 6.5 km/hand 75 km/h were cons'ıdered. Plough drawbar force and fuel comsumption vseremeasuredwith the aid of data acquisition system.The highest dawbar force was obtained as 13.3 kN at the ground speed of 75kmlh, \vhile the lowest drawbar force was obtained as 9.4 kN at the ground speed of35 kmlh.The highest fuel comsumption of 35.3 Jlha was foundfor the ground speed of35 kmlh, while the lowest one of 26.0 llha was found for the ground speed of 5 kmlh.

🔖

Cite This Article

BASTABAN, S. (2011). TOPRAK İŞLEMEDE FARKLI İLERLEME HIZLARININ PULLUK ÇEKİ KUVVETİNE VE YAKIT TÜKETİMİNE ETKİLERİ ÜZERİNE BİR ARAŞTIRMA / A RESEARCH ON EFFECTS OF DIFFERENT GROUND SPEEDS ON THE DRAWBAR FORCE AND FUEL CONSUMPTÎON OF PLOUGH IN TILLAGE. Atatürk Üniversitesi Ziraat Fakültesi Dergisi, Cilt: 25 - Sayı: 2. https://ajindex.com/articles/37523

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...