Journals / Turkish Journal of Engineering and Environmental Sciences / 2001 / Cilt: 25 - Sayı: 3

Design and Performance Studies on a Conical Agglomerator Suitable for a Spray Drier

Pages
139–142
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The results showed that the rate of dissolution and the effective surface area per unit weight of agglomerates decreased with increasing size.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:An agglomeration system was designed to function at the conical bottom section of a spray drier where the binder was sprayed on the whirling dry particles before exiting.
📊
Key Findings & Data:The protease enzyme particles of 172 ( mu )m average diameter were used to test the operation.
💡
Conclusion & Impact:The results showed that the rate of dissolution and the effective surface area per unit weight of agglomerates decreased with increasing size.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Agglomeration · dissolution rate · size enlargement.

Abstract

An agglomeration system was designed to function at the conical bottom section of a spray drier where the binder was sprayed on the whirling dry particles before exiting. The protease enzyme particles of 172 ( mu )m average diameter were used to test the operation. The agglomerates thus obtained were subjected to several tests characterizing the rate of dissolution and effective surface area related to the solid diameter. The results showed that the rate of dissolution and the effective surface area per unit weight of agglomerates decreased with increasing size. The solubility of the binder may have an effective role in this matter.

Özet

An agglomeration system was designed to function at the conical bottom section of a spray drier where the binder was sprayed on the whirling dry particles before exiting. The protease enzyme particles of 172 ( mu )m average diameter were used to test the operation. The agglomerates thus obtained were subjected to several tests characterizing the rate of dissolution and effective surface area related to the solid diameter. The results showed that the rate of dissolution and the effective surface area per unit weight of agglomerates decreased with increasing size. The solubility of the binder may have an effective role in this matter.

🔖

Cite This Article

ÇAKALOZ, T., KUMCUOĞLU, S. (2001). Design and Performance Studies on a Conical Agglomerator Suitable for a Spray Drier. Turkish Journal of Engineering and Environmental Sciences, Cilt: 25 - Sayı: 3, 139–142. https://ajindex.com/articles/369314

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...