Journals / Tekstil ve Mühendis / 2010 / Cilt: 17 - Sayı: 78

An investigation of damage initiation and progression properties in multi-layer woven carbon-epoxy composite materials in uni-axial tension

Çok katmanlı dokuma karbon-epoksi kompozit malzemelerde tek eksenli gerilme altında hasar başlama ve yayılma özelliklerinin araştırılması

Pages
6–14
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Full-field strain measurements highlight the relation between the strain concentrations that are linked with the damage initiation and the reinforcement structure.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Damage and mechanical properties in textile composites are closely connected with the textile reinforcement's internal structure.
📊
Key Findings & Data:This paper reports and discusses a study of the mechanical behavior and damage of a 2x2 twill woven carbon/epoxy composite resulting from uni-axial tension in the warp direction.
💡
Conclusion & Impact:Full-field strain measurements highlight the relation between the strain concentrations that are linked with the damage initiation and the reinforcement structure.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Damage and mechanical properties in textile composites are closely connected with the textile reinforcement's internal structure. This paper reports and discusses a study of the mechanical behavior and damage of a 2x2 twill woven carbon/epoxy composite resulting from uni-axial tension in the warp direction. A damage investigation was performed by using acoustic emission, full-field strain optical measurements, as well as X-ray and optical microscopy. As a result of the tests, the mechanical properties and strain values of the composite's damage threshold were determined. Damage initiation when loaded in the warp direction occurred between 0.2-0.3% of the applied strain. Microscopic examination showed that damage or cracks initiated where the yarn was crimped and at interactions between the warp and fill yarns. Full-field strain measurements highlight the relation between the strain concentrations that are linked with the damage initiation and the reinforcement structure.

Özet

Tekstil kompozitlerinde hasar ve mekanik özellikler, tekstil yapısı ile yakından ilgilidir. Bu makale, çok katmanlı 2x2 dimi karbon dokuma kompozitlerin, tek eksenli gerilim altında mekanik özelliklerini ve hasar başlama ve yayılma özelliklerini araştırmaktadır. Hasar araştırmaları, akustik emisyon kayıtları, tüm yüzeyli gerinim ölçümleri, x-ray ve optik mikroskop gözlemleri ile yapılmıştır. Testlerin sonucunda kompozitlerin mekanik özellikleri ve hasar başlama gerinim değerleri tespit edilmiştir. Çözgü doğrultusunda hasarın 0.2-0.3% gerinim düzeyinde başlayıp yayıldığı gözlenmiştir. Mikroskopik gözlemler hasarın, ipliklerin dokuma kumaş yapısında kıvrım aldıkları ve birbirleri ile kesiştikleri kısımlarda başladığını ve yayıldığını göstermiştir. Tüm yüzeyli gerinim ölçümleri ise, hasarın başlamasına neden olan gerilim konsanstrasyon bölgelerinin tekstil yapısına bağlı olduğunu göstermiştir.

🔖

Cite This Article

KARAHAN, M. (2010). An investigation of damage initiation and progression properties in multi-layer woven carbon-epoxy composite materials in uni-axial tension. Tekstil ve Mühendis, Cilt: 17 - Sayı: 78, 6–14. https://ajindex.com/articles/366355

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. Lomov, S.V, Bogdanovich, A.E., Ivanov, D.S., Mungalov, D., Karahan, M., Verpoest, I., A comparative study of tensile properties of non-crimp 3d orthogonal weave and multi-layer plain weave e-glass composites. Part 1: materials, methods and principal results, Composites A, 40,1134-1143 (2009). 2-Ivanov, D.S., Lomov, S.V, Bogdanovich, A.E., Karahan, M., Verpoest, I., A Comparative study of tensile properties of non-crimp 3d orthogonal weave and multi-layer plain weave e-glass composites. Part 2: Comprehensive experimental results, Composites A, 40,1144-1157 (2009). 3-Lomov S.V., Bogdanovich A. E., Ivanov D. S., Mungalov D., Verpoest I., Karahan M., Damage progression in 2D and non-crimp 3D woven composites, Composites2009 2ndECCOMAS Thematic Conference on the Mechanical Response of Composites, 1-3 April 2009,
  2. Imperial College London, UK. 4-Lomov S. V., Bogdanovich A. E., Ivanov D. S., Hamada K., Kurashiki T., Zako M., Karahan M., and Verpoest I., Finite element modelling of progressive damage in non-crimp 3D orthogonal weave and plain weave E-Glass composites, 2ND WORLD CONFERENCE ON 3D FABRICS, April 6-7, 2009,
  3. Greenville, South Carolina, USA. 5-Lomov S. V., Gorbatikh L., Greef N., Karahan M., Godara A., Mezzo L., Luizi F., Verpoest I., Nano-engineered fibre reinforced composite: Gain in properties and limitations of the manufacturing, 14TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, 7-10 June 2010,
  4. Budapest, Hungary. 6-Gao, F., Boniface, L., Ogin, S. L., Smith, P. A., Greaves, R. P., Damage accumulation in woven-fabric CFRP laminates under tensile loading: Part 1. Observations of damage accumulation, Composites Science and Technology, 59(1), 123-136(1999). 7-Daggumati, S., De Baere, I., Van Paepegem, W, Degrieck, J., Xu, J., Lomov, S.V., Verpoest, I., Meso-scale modelling in thermoplastic 5-harness satin weave composite, ICCM-17, 17th International Conference on Composite Materials, Edinburgh, UK, 27-3 ljuly (2009). 8-John, S., Herszberg, I., Coman, F., Longitudinal and transverse damage taxonomy in woven composite components, Composites PartB, 32,659-668 (2001). 9-El Hage, Ch., Aboura, Z., Younes, R., Benzeggagh, M.L., Zoaeter, M., Experimental damage studies of 2.5D interlock CFRP under uniaxial loading, Proceeding of ECCM-12, Biarritz, France, Aug. 29-Sept. 1,(2006). 10-Bogdanovich, A.E., Lomov, S.V., Karahan, M., Mungalov, D., and Verpoest, I., Quasi-static and fatigue tensile behavior of carbon/epoxy composite reinforced with 3D non-crimp orthogona