Journals / Tekstil ve Mühendis / 2010 / Cilt: 17 - Sayı: 78

Antistatic and antibacterial properties of metal coated polypropylene fibers by magnetron sputtering

Mıknatıssal saçtırma sistemi ile metal kaplanan polipropilen liflerin antistatik ve antibakteriyel özellikleri

Pages
1–5
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this study, multifilament polypropylene fibers (which have diameter of 65 jim) have been coated under vacuum with electrical conductors such as Cr and Ag, and electrical conductivity and antibacterial properties have been investigated.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In order to modify and obtain functional textile fibers, many methods have been used.
📊
Key Findings & Data:For instance, antistatic textiles can be achieved with doping fibers with conductive particles.
💡
Conclusion & Impact:In this study, multifilament polypropylene fibers (which have diameter of 65 jim) have been coated under vacuum with electrical conductors such as Cr and Ag, and electrical conductivity and antibacterial properties have been investigated.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In order to modify and obtain functional textile fibers, many methods have been used. For instance, antistatic textiles can be achieved with doping fibers with conductive particles. Besides the magnetron sputtering technique, which is an environmentally friendly technique, can be used to deposit metals as thin films onto surface of fibers for antistatic purposes. In this study, multifilament polypropylene fibers (which have diameter of 65 jim) have been coated under vacuum with electrical conductors such as Cr and Ag, and electrical conductivity and antibacterial properties have been investigated.

Özet

Tekstil liflerini modifiye ederek, katma değeri yüksek, fonksiyonel teknik tekstil elde etmek için çeşitli yöntemler kullanılmaktadır. Örneğin, antistatik tekstiller, lifler içerisine iletken parçaçık katkılama ile elde edilebileceği gibi çeyreye kimyasal olarak zarar vermemesi dolayısıyla vakumda mıknatıssal saçtırma ile yüzeyi istenilen metali ince film olarak yüzeye kaplayarak da elde edilebilir. Bu çalışmada çapları 65 fim olan multifilament sentetik polipropilen liflerin yüzeyleri yüksek vakum altında nanometre kalınlığında Cr ve Ag gibi elektriksel iletken metal filmler ile kaplanmış ve elektriksel iletkenlik ve antibakteriyel özellikleri incelenmiştir.

🔖

Cite This Article

ÖZYÜZER, L., MERİÇ, Z., SELAMET, Y., KUTLU, B., CİRELİ, A. (2010). Antistatic and antibacterial properties of metal coated polypropylene fibers by magnetron sputtering. Tekstil ve Mühendis, Cilt: 17 - Sayı: 78, 1–5. https://ajindex.com/articles/366354

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (4)

  1. Sen A.K., Coated Textiles, 2007, CRC Press, 2.Horrocks A. R. and Anand S. C., 2000, Handbook of Technical Textiles CRC Press, 3.Shishoo R., 2007
  2. Plasma Technologies for Textiles, CRC Press, 4.Hasegawa Y., Shikida M., Ogura D., Suzuki Y. and Sato K.,(2008), Fabrication of a wearable fabric tactile sensor produced by artificial hollow fiber, J. Micrömech. Microeng., 18, 085014. 5.Hegemann D., Oehr C., Fischer A., (2005),
  3. Design of Functional Coatings, J. Vac. Sci. Technol. A23,5. 6.Simsek Y., OzyuzerL., Seyhan A. T., TanogluM. and Schulte K., (2007), Temperature dependence of electrical conductivity in double-wall and multi-wall carbon nanotube/polyester nanocomposites, Journal of Materials Science 42,9689-9695. 7.Dall'Acqua L., Tonin C., Peila R., Ferrero F,, Catellani M., (2004), Performances and properties of intrinsic conductive cellulose-polypyrrole textiles, Synthetic Metals 146,213. 8.PerelshteinL, ApplerotG., PerkasN., GuibertG., Mikhailov S. and Gedanken A., (2008), Sonochemical coating of silver nanoparticles on textile fabrics (nylon, polyester and cotton) and their antibacterial activity, Nanotechnology 19,245705. 9.Ulucan S., Aygun G., Ozyuzer L., Eğilmez M., Turan R., (2005) Properties of Reactive 0-2 Ion Beam Sputtered Ti02 on Si Wafers, Journal of Optoelectronic and Advanced Materials 7,297. 10.Ulucan, S., "Growth of magnetron sputtered superconductor MgB2 thin films", 2006,
  4. M.S. thesis, İzmir Institute of Technology, Thesis Advisor: Doç. Dr. Lütfi Özyüzer. 11.Tuna O., Selamet Y., Aygün G. and Özyüzer L., (2010), High Quality ITO Thin Films Grown by DC and RF Sputtering without Oxygen, Journal of Physics D: Appl. Phys 43,055402. 12.Deng B., Wei Q., Gao W., Yan X., (2007;, Surface Functionalization of Nonwovens by Aluminum Sputter Coating, Fibres and Textiles 15,90. 13.Wei Q., Xiao X., Hou D., Ye H., Huang F., (2008), Characterization ofNonwoven Material Functionalized by Sputter Coating of Copper, Surface and Coating Technology 202,2535. 14.Wei Q., Yu L., Hou D., Huang F., (2008), Surface characterization and properties of functionalized nonwoven, J. Applied Polymer Science 107,132. 15.Bula K.,KoprowskaJ., Janukiewicz J., (2006),Application of Cathode Sputtering for Obtaining Ultra-thin Metallic Coatings on Textile Products, Fibres and Textiles 14,75. 16.Amberg M., Grieder K., Barbadoro P., Heuberger M., Hegemann D., (2008), Electromechanical Behavior of nanoscale Silver coatings on PET fibers, Plasma Process and Polymers 5,874. 17.Tekstil,