Journals / Tekstil ve Mühendis / 2015 / Cilt: 22 - Sayı: 97

EFFECT OF FRAGRANCE FINISH ON MECHANICAL AND COMFORT PROPERTIES OF DIGITALLY PRINTED FABRIC

KOKU BİTİM İŞLEMİNİN DİJİTAL BASKILI KUMAŞLARIN MEKANİKSEL VE KONFOR ÖZELLİKLERİNE ETKİSİ

Pages
50–54
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Along with the mechanical properties, the effects of fragrance finish for moisture management, water and air permeability through the fabric has been investigated and reported.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:With the growing demands of fragrance finished fabrics especially in ladies wear, we have printed 100% cotton fabrics for both corresponding and non-corresponding prints.
📊
Key Findings & Data:We have already reported the positive and cost effective impact of corresponding printing along with the fragrance finishing on customer’s perception [1].
💡
Conclusion & Impact:Along with the mechanical properties, the effects of fragrance finish for moisture management, water and air permeability through the fabric has been investigated and reported.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Koku · Bitim işlemi · Mekanik

Abstract

With the growing demands of fragrance finished fabrics especially in ladies wear, we have printed 100% cotton fabrics for both corresponding and non-corresponding prints. Digital printing technique has been used for these studies. We have already reported the positive and cost effective impact of corresponding printing along with the fragrance finishing on customer’s perception [1]. Along with the aesthetic properties of a fabric, some other properties of fabrics should be accounted for wearing purposes. So in this study, the effects of fragrance finishing on mechanical and comfort properties of fabric have been evaluated. Along with the mechanical properties, the effects of fragrance finish for moisture management, water and air permeability through the fabric has been investigated and reported.

Özet

ellikle bayan giyiminde koku bitim işlemi görmüş kumaşlara olan talep artmasının bir sonucu olarak, bu çalışmada da %100 pamuklu kumaşlara eşlenik veya eşlenik olmayan baskılar, dijital baskı tekniği kullanılarak uygulanmıştır. Önceki çalışmamızda koku bitim işleminin kullanıcının algısına etkisinin yanısıra eşlenik (karşılıklı) baskı işleminin pozitif ve daha az maliyetli etkisini belirtmiştik [1]. Kumaşın estetik özelliklerinin yanı sıra, giyim amaçlı diğer bazı özellikleri de hesaba katılmalıdır. Bu sebeple bu çalışmada, koku bitim işleminin kumaşın mekaniksel ve konfor özelliklerine etkisi incelenmiştir. Mekanik özelliklerinin yanı sıra koku bitim işleminin kumaştaki nem yönetimine, su ve hava geçirgenliğine etkisi araştırılmış ve sonuçları sunulmuştur

🔖

Cite This Article

AAMIR, T., ANWAAR, M., HUSSAIN, A., BHATTI, N., JAVED, Z. (2015). EFFECT OF FRAGRANCE FINISH ON MECHANICAL AND COMFORT PROPERTIES OF DIGITALLY PRINTED FABRIC. Tekstil ve Mühendis, Cilt: 22 - Sayı: 97, 50–54. https://ajindex.com/articles/366313

References (2)

  1. Anwaar, M. & Aamir, T., (2013), Assessment of Customer Experience and Fragrance Finished Fabric with Corresponding and Non-Corresponding Prints, Proceeding of 2nd International Textiles and Costume Congress, pp. 230- 239, October 2013,
  2. Kasetsart University, Bangkok Vijayalakshmi, D. & Ramachandran, T., (2012), Isolates Application of Multi-Functional Finishes on Denim Garments, Daffodil International University Journal of Science and Technology, Vol. 7, Issue. 1. Karolia, A. & Mendapara, S., (2007), Imparting Antimicrobial and Fragrance Finsh on cotton using chitosan with silicon softener, Indian Journal of Fibre & Textile Research, pp. 99-104, Vol. 32. Shiqi, L. Lewis, E. Stewart, M. Qian, L. & Boyter, H., (2008), Effect of finishing methods on washing durability of microencapsulated aroma finishing, Journal of the Textile Institute, pp. 173-183, Vol. 99. Hegemann, D. Hossain, M. & Balazs D.J., (2007), Nanostructured plasma coatings to obtain multifunctional textile surfaces, Progress in Organic Coatings, pp. 237-240, Vol. 58