Journals / Tekstil ve Mühendis / 2012 / Cilt: 19 - Sayı: 88

POLY (THRIMETHYLENE TEREPHTHALATE) FIBRES PART 2: WET PROCESSING

POLİ (TRİMETİLEN TEREFTALAT) LİFLERİ BÖLÜM 2: TERBİYE İŞLEMLERİ

Pages
28–38
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This was accomplished through a broad literature survey including recent researches and developments in the area.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Poly (trimethilene terephtalate) (PTT), which is an elastic aromatic polyester, can be dyed with disperse dyes at atmospheric conditions without the need of carriers due to its low glass transition temperature (Tg).
📊
Key Findings & Data:PTT fibers can exhibit good fastness properties in spite of its low Tg.
💡
Conclusion & Impact:This was accomplished through a broad literature survey including recent researches and developments in the area.
🔬Design:Survey & Empirical Study
📍Scope:Comprehensive Sample
⚙️Variables:Politrimetilen tereftalat lifleri · ön işlemler · boyama

Abstract

Poly (trimethilene terephtalate) (PTT), which is an elastic aromatic polyester, can be dyed with disperse dyes at atmospheric conditions without the need of carriers due to its low glass transition temperature (Tg). PTT fibers can exhibit good fastness properties in spite of its low Tg. This study, which is Part II of a review study, gives information on the wet processing (pretreatment, dyeing, clearing, subsequent finishing treatments etc.) of PTT fiber and its effects on the fiber. This was accomplished through a broad literature survey including recent researches and developments in the area.

Özet

Poli(trimetilen tereftalat) (PTT), yüksek elastikiyeti ile dikkat çeken ve dispers boyarmaddelerle boyanabilen bir aromatik poliesterdir. Düşük camlaşma sıcaklığı (Tg) sayesinde kaynama sıcaklığında ve atmosferik basınç altında, carrier gibi yardımcı maddelere ihtiyaç duyulmadan kolaylıkla boyanabilmektedir. PTT lifleri düşük Tg sıcaklığı değerlerine rağmen iyi haslık değerleri sergileyebilmektedir. Derlemenin ikinci bölümü olan bu makalede, PTT lifinin gördüğü terbiye işlemleri (ön işlemler, boyama ve bitim işlemleri vs.) hakkında bilgiler verilecektir.

🔖

Cite This Article

YILDIRIM, F. F., AVİNÇ, O. O., YAVAŞ, A. (2012). POLY (THRIMETHYLENE TEREPHTHALATE) FIBRES PART 2: WET PROCESSING. Tekstil ve Mühendis, Cilt: 19 - Sayı: 88, 28–38. https://ajindex.com/articles/366183

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...