SavedAdd your journal

Journals / Tesisat Mühendisliği / 2018 / Cilt: 2018 - Sayı: 168

The Numerical and Experimental Investigation of Thermal Conductivity of EPS Insulation Material Used in Buildings According to Different Density

Binalarda Kullanılan EPS Yalıtım Malzemesinin Farklı Yoğunluklara Göre Isıl İletkenliğinin Deneysel ve Sayısal İncelenmesi

Hüsamettin TAN
Battal DOĞAN
Pages
40–49
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Consequently, specific heat loss was determined in the case of 3 different regions for sample building and it is determined how the insulation material that have different density values influence the heating requirement.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Nowadays, reducing energy losses in buildings is an important issue.
📊
Key Findings & Data:Therefore, appropriate heat insulation material must be used to reduce energy losses.
💡
Conclusion & Impact:Consequently, specific heat loss was determined in the case of 3 different regions for sample building and it is determined how the insulation material that have different density values influence the heating requirement.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Nowadays, reducing energy losses in buildings is an important issue. Therefore, appropriate heat insulation material must be used to reduce energy losses. In this study, the comparison of numerical analysis, which is made from two dimension drawings, with experimental results were made by using internal structure images of EPS insulation materials. Additionally, thermal conductivity of EPS was investigated according to different mass density. Consequently, specific heat loss was determined in the case of 3 different regions for sample building and it is determined how the insulation material that have different density values influence the heating requirement.

Özet

Binalarda enerji kayıplarının azaltılması günümüzde önemli bir konudur. Bu amaçla enerji kayıplarını azaltmak için uygun ısı yalıtım malzemesinin kullanılması gerekir. Bu çalışmada binalarda kullanılan EPS yalıtım malzemesinin iç yapı görüntüleri kullanılarak elde edilen 2 boyutlu çizimlerin sayısal analiz sonuçlarının deneysel sonuçlar ile karşılaştırması yapılmıştır. Ek olarak farklı yoğunluktaki malzemenin ısıl iletkenliği nasıl etkilediği incelenmiştir. Sonuç olarak her yoğunluk değeri için örnek bir binanın 3 farklı bölgede olması durumunda özgül ısı kaybı belirlenerek farklı yoğunluk değerindeki yalıtım malzemesinin ısıtma ihtiyacını ne oranda etkilediği belirlenmiştir.

🔖

Cite This Article

TAN, H., DOĞAN, B. (2018). The Numerical and Experimental Investigation of Thermal Conductivity of EPS Insulation Material Used in Buildings According to Different Density. Tesisat Mühendisliği, Cilt: 2018 - Sayı: 168, 40–49. https://ajindex.com/articles/364879

References (13)

  1. KAYNAKLAR Pérez-Lombard, L., J. Ortiz, and C. Pout, A Review On Buildings Energy Consumption Information, Energy and Buildings, 2008, 40(3): p. 394-398.
  2. Yang, L., H. Yan, and J. C. Lam, Thermal Comfort And Building Energy Consumption Implications-A Review, Applied Energy, 2014, 115: p. 164-173.
  3. Büyükalaca, O. and H. Bulut, Detailed Weather Data For The Provinces Covered By The Southeastern Anatolia Project (GAP) of Turkey, Applied Energy, 2004, 77(2): p. 187-204.
  4. Al-Sanea, S. A., et al., Heat Transfer Characteristics and Optimum Insulation Thickness for Cavity Walls. Journal of Building Physics, 2003, 26(3): p. 285-307.
  5. Bolattürk, A., Determination of Optimum Insulation Thickness For Building Walls With Respect To Various Fuels And Climate Zones In Turkey. Applied Thermal Engineering, 2006, 26(11-12): p. 1301-1309.
  6. Dombaycı, Ö. A., M. Gölcü and Y. Pancar, Optimization Of Insulation Thickness For External Walls Using Different Energy-Sources, Applied Energy, 2006, 83(9): p. 921-928.
  7. Sisman, N., et al., Determination Of Optimum Insulation Thicknesses Of The External Walls And Roof (Ceiling) For Turkey’s Different Degree-Day Regions, Energy Policy, 2007, 35(10): p. 5151-5155.
  8. Bolattürk, A., Optimum Insulation Thicknesses For Building Walls With Respect To Cooling And Heating Degree-Hours In The Warmest Zone Of Turkey, Building and Environment, 2008, 43(6): p. 1055- 1064. Kaynakli, O., A Study On Residential Heating Energy Requirement And Optimum Insulation Thickness, Renewable Energy, 2008, 33(6): p. 1164-1172.
  9. Yu, J., et al., A Study On Optimum Insulation Thicknesses Of External Walls In Hot Summer And Cold Winter Zone Of China, Applied Energy, 2009, 86(11): p. 2520-2529.
  10. Fertelli, A., Determination Of Optimum Insulation Thickness For Different Building Walls In Turkey, Transactions Of Famena, 2013, 2. Bektas Ekici, B., A. Aytac Gulten, and U. T. Aksoy, A Study On The Optimum Insulation Thicknesses Of Various Types Of External Walls With Respect To Different Materials, Fuels And Climate Zones In Turkey, Applied Energy, 2012, 92: p. 211-217.
  11. Ozel, M., Thermal Performance And Optimum Insulation Thickness Of Building Walls With Different Structure Materials, Applied Thermal Engineering, 2011, 31(17-18): p. 3854-3863.
  12. Mendes, N., et al., Moisture Effects On Conduction Loads, Energy and Buildings, 2003, 35(7): p. 631-644.
  13. Kong, F. and M. Zheng, Effects Of Combined Heat And Mass Transfer On Heating Load In Building Drying Period, Energy and Buildings, 2008, 40(8):