SavedAdd your journal

Journals / ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE / 2020 / Cilt: 8 - Sayı: 3

Theoretical Investigation on Static Analysis of Pultruded GFRP Composite Beams

Emrah MADENCİ
Yasin Onuralp ÖZKILIÇ
Lokman GEMİ
Pages
483–490
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The comparison of the analytical results to both experimental and finite element results revealed that the differences between analytical results and the experimental and numerical findings are less than 1%, which indicates an excellent agreement.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Composite materials, which have been used especially in the construction sector to strength beams and columns, have been produced in pultruded GFRP profiles with different geometries with the pultrusion method.
📊
Key Findings & Data:Pultruded GFRP profiles are an alternative to traditional building elements in many construction applications thanks to their superior properties such as high strength, chemical resistance, thermal and electrical insulation.
💡
Conclusion & Impact:The comparison of the analytical results to both experimental and finite element results revealed that the differences between analytical results and the experimental and numerical findings are less than 1%, which indicates an excellent agreement.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Composite materials, which have been used especially in the construction sector to strength beams and columns, have been produced in pultruded GFRP profiles with different geometries with the pultrusion method. Pultruded GFRP profiles are an alternative to traditional building elements in many construction applications thanks to their superior properties such as high strength, chemical resistance, thermal and electrical insulation. Pultruded GFRP profiles are exposed to various loads and change shapes due to the effect of these loads. It is very important to determine the load and deformation capacities as structural members. These profiles are often exposed to bending while serving as beams. In this study, a multiscale analysis of the deflection and stress behavior of pultruded GFRP composite beam is presented. The proposed formulations are verified using the results of experimental and numerical studies. The comparison of the analytical results to both experimental and finite element results revealed that the differences between analytical results and the experimental and numerical findings are less than 1%, which indicates an excellent agreement.

🔖

Cite This Article

MADENCİ, E., ÖZKILIÇ, Y. O., GEMİ, L. (2020). Theoretical Investigation on Static Analysis of Pultruded GFRP Composite Beams. ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE, Cilt: 8 - Sayı: 3, 483–490. https://ajindex.com/articles/354909

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. S. Satasivam, Y. Bai, and X.-L. Zhao, "Adhesively bonded modular GFRP web–flange sandwich for building floor construction", Composite Structures, vol. 111, pp. 381- 392, 2014
  2. J.R. Correia, F.A. Branco, and J.G. Ferreira, "Flexural behaviour of GFRP–concrete hybrid beams with interconnection slip", Composite Structures, vol. 77, pp. 66- 78, 2007
  3. J.R. Correia, F.A. Branco, and J.G. Ferreira, "Flexural behaviour of multi-span GFRP-concrete hybrid beams", Engineering Structures, vol. 31, pp. 1369-1381, 2009
  4. F. Aydın, A. Sarıbıyık, M. Sarıbıyık, and M. Ipek, "Experimental Study of Flexural Performance of Reinforced Concrete Beams and Hybrid Beams", Acta Physica Polonica A, vol. 134(1) pp. 244-247, 2018 [5] M. Saribiyik, and P. D. Gosling, "Experimental study of a bonded plastic fiber reinforced polymer connector assembly", Journal of Composites for Construction, vol. 8(6), pp. 549-559, 2004
  5. A. Vedernikov, A. Safonov, F. Tucci, P. Carlone, and I. Akhatov, “Pultruded materials and structures: A review”, Journal of Composite Materials, In Press, 2020
  6. M. Saribiyik, "Design of light-weight structure by pultruded glass reinforced plastic", Journal of the Faculty of Engineering and Architecture of Gazi University, vol. 22(1), pp.199-205, 2007
  7. M. Sarıbıyık, A. Cumhur, F. Aydın, and A. Sarıbıyık, “Pultruzyon Metodu İle Üretilen Cam Fiber Takviyeli Plastik Profillerin Sera Modellemesinde Kullanılması”, International Symposium On Advances In Earthquake & Structural Engineering, pp. 674-682, Antalya, Turkey, October 24-26 2007
  8. G. Boscato and S. Ientile, "Experimental and numerical investigation on dynamic properties of thin-walled GFRP buckled columns", Composite Structures, vol. 189, pp. 273- 285, 2018
  9. Bedford, URL: http://bedfordreinforced.com (Visited on Feb. 15, 2020
  10. M. Sarıbıyık, F. Aydin, N. Cağlar, and A. Sarıbıyık, “Use of the Pultruded Glass Reinforced Plastic in the Modelling of Earthquake Resistant Structure”, In 8th International Congress on Advances in Civil Engineering, Eastern Mediterranean University, Famagusta, North Cyprus, pp. 15-17, 2008
  11. M. Bell, D. Fick, R. Ament, and N.M. Lister, "The Use of Fiber-Reinforced Polymers in Wildlife Crossing Infrastructure", Sustainability, vol. 12(4), pp. 1557, 2020
  12. J. Arbaoui, M. Tarfaoui, and A. El Malki Alaoui, "Dynamical characterisation and damage mechanisms of Eglass/vinylester woven composites at high strain rates compression", Journal of Composite Mat