SavedAdd your journal

Journals / ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE / 2020 / Cilt: 8 - Sayı: 2

Optimization of Cutting Parameters for Sustainable Machining of Titanium Ti-5553 Alloy using Genetic Algorithm

Ali Osman KABİL
Yusuf KAYNAK
Pages
310–315
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Obtained results illustrated that optimization using genetic algorithm is a very effective approach to substantially improve machining performance of this alloy and make machining process of this alloy more sustainable by reducing energy consumption, manufacturing cost and increasing material removal rate in machining process of new generation titanium alloy.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Titanium Ti-5553 alloys have been considered as difficult-to-machine materials due to the extremely high tool wear, high cutting forces, high temperature, and poor surface quality of machined parts.
📊
Key Findings & Data:Process parameters needs to be optimized in order to improve machining performance and in the meantime reducing manufacturing cost.
💡
Conclusion & Impact:Obtained results illustrated that optimization using genetic algorithm is a very effective approach to substantially improve machining performance of this alloy and make machining process of this alloy more sustainable by reducing energy consumption, manufacturing cost and increasing material removal rate in machining process of new generation titanium alloy.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Titanium Ti-5553 alloys have been considered as difficult-to-machine materials due to the extremely high tool wear, high cutting forces, high temperature, and poor surface quality of machined parts. Process parameters needs to be optimized in order to improve machining performance and in the meantime reducing manufacturing cost. This study proposes sustainable machining process for this new generation Titanium Ti-5553 alloy. Process parameters including depth of cut, cutting speed, and feed rate were taken into account to optimize parameters better tool life, material removal rate and surface roughness together with energy consumption for the first time in literature. Genetic algorithm was utilized for optimizing the process parameters. Obtained results illustrated that optimization using genetic algorithm is a very effective approach to substantially improve machining performance of this alloy and make machining process of this alloy more sustainable by reducing energy consumption, manufacturing cost and increasing material removal rate in machining process of new generation titanium alloy.

🔖

Cite This Article

KABİL, A. O., KAYNAK, Y. (2020). Optimization of Cutting Parameters for Sustainable Machining of Titanium Ti-5553 Alloy using Genetic Algorithm. ACADEMIC PLATFORM-JOURNAL OF ENGINEERING AND SCIENCE, Cilt: 8 - Sayı: 2, 310–315. https://ajindex.com/articles/354846

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (11)

  1. M. Ozkutuk and Y. Kaynak, "The effect of material parameters on chip formation in orthogonal cutting simulation of Ti-5553 Alloy," Procedia CIRP, vol. 58, pp. 305-310, 2017
  2. K. Hua, X. Xue, H. Kou, J. Fan, B. Tang, and J. Li, "Characterization of hot deformation microstructure of a near beta titanium alloy Ti-5553," Journal of Alloys and Compounds, vol. 615, pp. 531-537, 2014
  3. A. Jayal, F. Badurdeen, O. Dillon Jr, and I. Jawahir, "Sustainable manufacturing: Modeling and optimization challenges at the product, process and system levels," CIRP Journal of Manufacturing Science and Technology, vol. 2, no. 3, pp. 144-152, 2010
  4. C. Camposeco-Negrete, J. d. D. C. Nájera, and J. C. Miranda-Valenzuela, "Optimization of cutting parameters to minimize energy consumption during turning of AISI 1018 steel at constant material removal rate using robust design," The International Journal of Advanced Manufacturing Technology, vol. 83, no. 5-8, pp. 1341- 1347, 2016
  5. C. Camposeco-Negrete, "Optimization of cutting parameters using Response Surface Method for minimizing energy consumption and maximizing cutting quality in turning of AISI 6061 T6 aluminum," Journal of cleaner production, vol. 91, pp. 109-117, 2015
  6. R. K. Bhushan, "Optimization of cutting parameters for minimizing power consumption and maximizing tool life during machining of Al alloy SiC particle composites," Journal of Cleaner Production, vol. 39, pp. 242-254, 2013
  7. P. Asokan, R. Saravanan, and K. Vijayakumar, "Machining parameters optimisation for turning cylindrical stock into a continuous finished profile using genetic algorithm (GA) and simulated annealing (SA)," The International Journal of Advanced Manufacturing Technology, vol. 21, no. 1, pp. 1-9, 2003
  8. D. Venkatesan, K. Kannan, and R. Saravanan, "A genetic algorithm-based artificial neural network model for the optimization of machining processes," Neural Computing and Applications, vol. 18, no. 2, pp. 135-140, 2009
  9. M. Cong, T. Han, and Q. Zhao, "Fuzzy multiobjective optimization of sliding rack based on six sigma and goal driven," in 2010 International Conference on Mechanic Automation and Control Engineering, 2010: IEEE, pp. 556-559
  10. I. Mukherjee and P. K. Ray, "A review of optimization techniques in metal cutting processes," Computers & Industrial Engineering, vol. 50, no. 1-2, pp. 15-34, 2006
  11. D. W. Coit and A. E. Smith, "Reliability optimization of series-parallel systems using a genetic algorithm,"