SavedAdd your journal

Journals / Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / 2015 / Cilt: 30 - Sayı: 1

Bir Dağıtım Sistemi Statik Senkron Kompanzatörün (DSTATKOM) Adım Adım Tasarım Prosedürü

Step by Step Design Procedure of a Distribution Static Synchronous Compensator (DSTATCOM)

AHMET TEKE
YELİZ YOLDAŞ
Mohammed LATRAN BARGHI
Pages
117–131
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The overall performance of the DSTATCOM is strictly related with the proper selection of power circuit configuration and controller algorithm.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:DSTATCOM is one of the power conditioning devices that is used to mitigate power quality problems in distribution systems.
📊
Key Findings & Data:The overall performance of the DSTATCOM is strictly related with the proper selection of power circuit configuration and controller algorithm.
💡
Conclusion & Impact:This study presents the design procedures for power and control circuits of 300 kVA DSTATCOM in detail.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

DSTATCOM is one of the power conditioning devices that is used to mitigate power quality problems in distribution systems. The overall performance of the DSTATCOM is strictly related with the proper selection of power circuit configuration and controller algorithm. The power circuit of DSTATCOM consists of dc link capacitor, inverter and passive filter. The control circuit of DSTATCOM consists of reference signal extraction, DC link voltage control, AC voltage control and switching signal generation. Compensating current reference signal is generally derived from the measured quantities by the use of the Instantaneous Symmetrical Component Theory (ISCT) and dq theory based method. A proportional–integral (PI) controller is generally used to maintain a constant voltage at the dc-link of a Voltage-Source Inverter (VSI). Furthermore, by connecting a delta connected inductor-capacitor-inductor (LCL) passive filter at inverter output, the high order harmonics generated by the DSTATCOM can be easily and effectively eliminated. This study presents the design procedures for power and control circuits of 300 kVA DSTATCOM in detail.

Özet

DSTATKOM, dağıtım sistemlerinde güç kalitesi problemlerini düzeltmek için kullanılan güç iyileştirici cihazlardan biridir. DSTATKOM un performansı tamamıyla güç devresinin ve kontrolcü algoritmasının uygun seçimiyle ilgilidir. DSTATKOMun güç devresi DA bara kapasitöründen, doğrultucudan ve pasif filtreden oluşur. DSTATKOMun kontrol devresi referans sinyal çıkartımından, DA bara gerilim kontrolünden, AA gerilim kontrolünden ve anahtarlama sinyali üretiminden oluşur. Kompanze eden akım referans sinyalleri genellikle Anlık Simetrik Bileşen Teorisi (ASBT) ve dq teori tabanlı metot kullanarak ölçülen değerlerden üretilir. Gerilim kontrollü doğrultucuda (GKD) DA barayı sabit gerilimde tutmak için

🔖

Cite This Article

TEKE, A., YOLDAŞ, Y., BARGHI, M. L. (2015). Bir Dağıtım Sistemi Statik Senkron Kompanzatörün (DSTATKOM) Adım Adım Tasarım Prosedürü. Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, Cilt: 30 - Sayı: 1, 117–131. https://ajindex.com/articles/350622

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (2)

  1. IEEE Std 1159, 1995. IEEE Recommended Practice for Monitoring Electric Power Quality, IEEE Std. 519-1995, IEEE Recommended Practices and Req. for Harmonic Control in Elect. Power Systems 2. Cilona, P., 2010. Modeling and Analysis of Shunt-Connected Voltage Source Converter for Voltage Dip Mitigation, MSc Thesis, Chalmers University of Technology, Göteborg, Sweden, 113 p. 3. Sumner, M., Abusorrah, A., Thomas, D. and Zanchetta, P., 2006. Improved Power Quality Control and Intelligent Protection for Grid Connected Power Electronic Converters using Real Time Parameter Estimation, Industry Applications Conf. IEEE 41st IAS Annual Meeting, vol. 4, pp. 1709-1715, 4. Tolabi, H.B., Ali, M.H., Rizwan, M., 2015.
  2. Simultaneous Reconfiguration, Optimal Placement of DSTATCOM, and Photovoltaic Array in a Distribution System Based on Fuzzy-ACO Approach", IEEE Transactions on Sustainable Energy, vol. 6, no. 1, pp.210-218, 5. Yan, R., Marais, B., Saha, T.K., 2014. Impacts of Residential Photovoltaic Power Fluctuation on On-Load Tap Changer Operation and a Solution using DSTATCOM, Electric Power Systems Research, vol. 111, pp. 185–193. 6. Shahnia, F., Chandrasena, R.P.S., Ghosh, A., Rajakaruna, S., 2014. Application of DSTATCOM for Surplus Power Circulation in MV and LV Distribution Networks with Single-Phase Distributed Energy Resources, Electric Power Systems Research, vol. 117, pp. 104–114. 7. Chen, C.S., Lin, C.H., Hsieh, W.L., Hsu, C.T. and Ku T.T., 2013. Enhancement of PV Penetration with DSTATCOM in Taipower Distribution System, IEEE Transactions on Power Systems, vol. 28, no. 2, pp. 1560-1567. 8. Barghi Latran, M., Teke, A., Yoldas, Y., 2015. Mitigation of Power Quality Problems Using Distribution Static Synchronous Compensator: A Comprehensive Review, IET Power Electronics, (Accepted, will be published in 2015). 9. Singh, B., Jayaprakash, P., Kothari, D.P., Chandra A., Al Haddad K., 2014. Comprehensive Study of DSTATCOM Configurations, IEEE Transactions on Ind. Informatics, vol. 10, no. 2, pp. 854-870. 10.Bilgin, H.F., Ermiş, M. 2010. Design and Implementation of a Current-Source Converter for Use in Industry Applications of D-STATCOM, IEEE Trans. on Power Electronics, vol. 25, no. 8, pp. 1943-1957. 11. Shokri, A., Shareef, H., Mohamed, A., Farhoodnea, M., Zayandehroodi, H., 2014. A Novel Single-Phase Phase Space-Based Voltage Mode Controller for Distributed Static Compensator to Improve Voltage Profile of Distribution Systems, Energy Conver. Management, vol. 79,