Journals / Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / 1996 / Cilt: 11 - Sayı: 2

The determining of optimum mechanisation degree in underground metallic mining

Yeraltı metal maden işletmelerinde optimum makanizasyon derecesinin belirlenmesi

Pages
303–314
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In this research, the relationship between workes cost, production cost and mechanisation degree of mining was studied Thus the optimum mechanisation was determined and its application possibility was also investigated.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:New development in underground mining have been continuously advanced due to rapid technological changes in current time These development in mining have been achieved using mechanisation and rationalisation system.
📊
Key Findings & Data:New development in underground mining have been continuously advanced due to rapid technological changes in current time These development in mining have been achieved using mechanisation and rationalisation system.
💡
Conclusion & Impact:In this research, the relationship between workes cost, production cost and mechanisation degree of mining was studied Thus the optimum mechanisation was determined and its application possibility was also investigated.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

New development in underground mining have been continuously advanced due to rapid technological changes in current time These development in mining have been achieved using mechanisation and rationalisation system. In this research, the relationship between workes cost, production cost and mechanisation degree of mining was studied Thus the optimum mechanisation was determined and its application possibility was also investigated.

Özet

Teknolojik gelişmelerin hızla ilerlediği günümüzde, yeraltı madenciliğinde de sürekli yeni çözüm ve gelişmeler ortaya çıkmaktadır. Maden işletmeleri bu gelişmelere, ancak tesislerin artan Mekanizasyonu ve Rasyonalizasyonu yardımıyla ulaşabilmektedir. Bu maksatla sunulan araştırmada; bir işletmenin işçilik maliyetleri düzeyi, üretim maliyetleri ve mekanizasyon derecesi arasında hangi ilişkilerin varolduğu soruları ele alınarak, optimum mekanizisyon derecesinin belirlenmesi ve Etibank Üçköprü Krom İşletmesinde uygulama olanakları incelenmiştir.

🔖

Cite This Article

DELİBALTA, M. S. (1996). The determining of optimum mechanisation degree in underground metallic mining. Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, Cilt: 11 - Sayı: 2, 303–314. https://ajindex.com/articles/350542