Journals / Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / 2005 / Cilt: 20 - Sayı: 1

Determination of triaxial parameters for unsaturated soils

Suya doygun olmayan zeminlerin üç eksenli parametrelerinin belirlenmesi

Pages
65–74
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Overall and pore water volume change was measured by using volume change transducer with 0,01 $cm^3$ sensitivity.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:An experimental work was carried out to investigate the triaxial response ofunsaturated soils.
📊
Key Findings & Data:Overall and pore water volume change was measured by using volume change transducer with 0,01 $cm^3$ sensitivity.
💡
Conclusion & Impact:In other words, matric suction contribute to increase in shear strength.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

An experimental work was carried out to investigate the triaxial response ofunsaturated soils. For this purpose, the conventional triaxial test apparatus were modified and reconstructed. In the experiments, undisturbed residuel clayey soils were used and matric suction was controlled by using axis translation technique. Tests were performed in drained condition. Overall and pore water volume change was measured by using volume change transducer with 0,01 $cm^3$ sensitivity. The test results show that the shear strength of unsaturated soils is greater than those of saturated soils. In other words, matric suction contribute to increase in shear strength.

Özet

Bu çalışmada suya doygun olmayan zeminlerin üç eksenli parametrelerinin araştırılması için deneyler gerçekleştirilmiştir. Bu amaçla klasik üç eksenli deney düzeneği modifiye edilmiştir. Deneylerde örselenmemiş reziduel killi zemin kullanılmıştır. Doygun olmayan zeminlerde gerilme değişkeni sayılan matrik emme, eksen kaydırma yöntemi kullanılarak istenilen seviyede tutulmuştur. Zemin içinde istenilen matrik emmeyi sağlamak için zemin tabanında hava giriş değeri 500 kPa olan seramikten yapılmış bir poroz disk kullanılmıştır. Deneyler konsolidasyonlu ve drenajlı koşullarda yapılmıştır. Zeminin toplam ve boşluk suyu hacim değişimi 0,01 $cm^3$ hassasiyete sahip hacim değişim ölçer ile ölçülerek bilgisayar ortamına aktarılmıştır. Deney sonuçları, doygun olmayan zeminlerin kayma mukavemetinin doygun zeminlere göre daha büyük olduğunu göstermiştir. Diğer bir deyişle matrik emme mukavemete katkı sağlamaktadır.

🔖

Cite This Article

TEKİNSOY, M. A., KAYADELEN, C., TAŞKIRAN, T. (2005). Determination of triaxial parameters for unsaturated soils. Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, Cilt: 20 - Sayı: 1, 65–74. https://ajindex.com/articles/350420

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Fredlund,D.G. and Rahardjo,H., "Soil mechanics for unsaturated soils", New York, Wiley, 1993. 2.Oberg,A.L. and Sallfors,G. "Determination of shear strength parameters of unsaturated silt and sandsbased on the water retention curve", Geotechnical Testing Journal, 20(1), 40-48, 1997. 3.Tekinsoy,M.A., Kayadelen,C, Keskin,M.S. ve Söylemez,M. "An Equation for Predicting Shear Strength Envelope with Respect to Matric Suction ", Computers and Geotechnics, 31, 589-593, 2004. 4.Vanapalli,S.K., Fredlund,D.G, Pufahl,D.E., Clifton,A.W., "Model for the prediction of shear strength with respect to soil suction ", Can. Geotech. J. 33:379-392,1996. 5.Oloo,S.Y. and Fredlund,D.G., "A method for determination of $phi^b4 for statically compacted soils'', Can. Geotech. J. 33:272-280, 1996. 6.Ho,D.Y.F. and Fredlund,D.G, "Multi-stage triaxial tests for unsaturated soils",Geotechnical Testing Journal, ASTM, 5. 18-25, 1982. 7.Aversa, S. and Nicotera, M.V., "A triaxial and oedometer apparatus for testing unsaturated soils", Geotechnical Testing Journal, 25, (1), 3-15, 2002. 8.Alonso,E.E., Gens,A., Josa,A.A., "A constitutive model for partialy saturated soils", Geotechnique, 40(3), 405-430, 1990.