Journals / Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi / 2019 / Cilt: 34 - Sayı: 2

A Review on Waste Heat Recovery Systems and a Case Study from Industry

Atık Isı Geri Kazanım Sistemlerine Yönelik Literatür Araştırması ve Sanayiden Örnek Vaka İncelemesi

Pages
57–72
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

For this design; energy, heat transfer and economic analysis have been made and the fuel savings of the system was calculated 1.121.410, 23 TL for 15 years economic life with present value method.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Rapid population growth, increase in the industrialization rate and technological developments increase the need for energy day by day.
📊
Key Findings & Data:It is assumed that about one-fourth of the energy consumption of many industrial plants throughout the world is lost waste gases discharged into the atmosphere.
💡
Conclusion & Impact:For this design; energy, heat transfer and economic analysis have been made and the fuel savings of the system was calculated 1.121.410, 23 TL for 15 years economic life with present value method.
🔬Design:Review & Systematic Survey
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Rapid population growth, increase in the industrialization rate and technological developments increase the need for energy day by day. It is assumed that about one-fourth of the energy consumption of many industrial plants throughout the world is lost waste gases discharged into the atmosphere. Recovering this huge waste heat is possible with heat recovery systems. In this study, literature review and classifications on waste heat recovery systems have been investigated. In addition, a case study was conducted to investigate the potential of exhaust gas heat recovery for a natural gas-fired boiler. Results led us design a heat recovery system to utilize the waste heat from the exhaust gas. For this design; energy, heat transfer and economic analysis have been made and the fuel savings of the system was calculated 1.121.410, 23 TL for 15 years economic life with present value method.

Özet

Yaşanan hızlı nüfus artışı, sanayileşme oranının yükselmesi ve teknolojideki gelişmeler enerjiye duyulanihtiyacı günden güne arttırmaktadır. Dünya genelinde birçok endüstriyel tesise ait enerji tüketimininyaklaşık olarak dörtte birinin atmosfere atılan atık gazlar ile kaybolduğu varsayılmaktadır. Çok büyükmiktarda olan bu kaybın tekrar kazanılması geri kazanım sistemleri ile mümkün hale gelmektedir. Buçalışmada atık ısı geri kazanım sistemleri üzerine yapılmış olan daha önceki çalışmalar sınıflandırılarakincelenmiştir. Ayrıca örnek bir vaka çalışması yapılarak doğalgaz yakıtlı bir kazan için baca gazı ısı gerikazanım potansiyeli araştırılmış, atık baca gazındaki ısıdan yararlanmak amacıyla ısı geri kazanım sistemi(reküperatör) tasarlanmıştır. Tasarlanan sistem için; enerji analizleri, ısı transfer analizleri ve ekonomikanalizler yapılmış, sistemin 15 yıllık ekonomik ömrü boyunca sağlayacağı yakıt tasarrufu, Net BugünküDeğer Metodu ile 1.121.410,23 TL olarak hesaplanmıştır .

🔖

Cite This Article

TOKGÖZ, N., ÖZGÜN, Ö. (2019). A Review on Waste Heat Recovery Systems and a Case Study from Industry. Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi, Cilt: 34 - Sayı: 2, 57–72. https://ajindex.com/articles/350234

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Angın, B., 2007. Cam Sanayinde Geleneksel Yakıtlar Yerine Doğal Gaz Kullanımının Enerji Ekonomisi Açısından İncelenmesi. Yüksek Lisans Tezi, Mersin Üniversitesi. Mersin, 1-68.
  2. Selbaş, R., 1992. Atık Isı Enerjisinden Yararlanma Yöntemleri ve Uygulamaları, Akdeniz Üniversitesi F.B.E, Yüksek Lisans Tezi, Antalya, 1-57.
  3. Willems, D., 2006. Advanced System Controls and Energy Savings for Industrial Boilers, Transactions of the Citrus Engineering Conference, 52, 11- 22. Güngör, A., 1995. İklimlendirmede Enerji Geri Kazanımında Isı Borulu Isı Değiştiriciler, Makine Mühendisleri Odası, II.Ulusal Tesisat Mühendisliği Kongresi ve Sergisi Bildiriler Kitabı, 639-655.
  4. Ersöz, M.A., 2002. Baca Gazlarındaki Atık Isının Isı Borusu ile Geri Kazanımının Araştırılması, Gazi Üniversitesi F.B.E, Yüksek Lisans Tezi, Ankara,1- 133. Ersöz, M., 2009. Baca Gazlarındaki Atık Isının Isı Borusu İle Geri Kazanımının Deneysel İncelenmesi, IX. Ulusal Tesisat Mühendisliği Kongresi, İzmir, 133-141.
  5. Ürün, E.,2010. Atık Baca Gazlarından Isı Geri Kazanımının Deneysel Olarak İncelenmesi, Karabük Üniversitesi F.B.E, Yüksek Lisans Tezi, Karabük, 1-71.
  6. Remeli, M., 2015. Simultaneous Industrial Waste Heat Recovery and Power Generation Using Heat Pipe Assisted Thermoelectric Generator, Manufacturing Engineering College of Science Engineering and Health RMIT University, Master’s Thesis, Australia, 1-158
  7. Jouhara, H., 2017. Experimental Investigation on a Flat Heat Pipe Heat Exchanger for Waste Heat Recovery in Steel Industry, 1st International Conference on Sustainable Energy and Resource Use in Food Chains, Berkshire-UK, 1-15.
  8. Ogulata, R. T., Doba, F., & Yilmaz, T. (1999). Second-law and experimental analysis of a cross-flow heat exchanger. Heat transfer engineering, 20(2), 20-27.
  9. Şahan, A.M., 1999. HVAC Uygulamalarında Isı Geri Kazanımı, IV. Ulusal Tesisat Mühendisliği Kongresi, İzmir, 151-161.
  10. Atalay, B., 1998. Waste Heat Recovery Using Regenerative Heat Exchanger, Çukurova University Institute of Natural and Applied Sciences, Master’s Thesis, Adana,1-96
  11. Goel, N., 2012. Design and Performance Analyses of Condensing Heat Exchangers for Recovering Water and Waste Heat from Flue Gas, Lehigh University, Department of Mechanical Engineering, Master’s Thesis, Ann Arbor, 1-107
  12. Yamankaradeniz, N., 2007. Tekstil Sanayiinde Atık Isıdan Yararlanılarak Enerji Tasarrufunda Klasik Sistem ile Isı Pompasının Karşılaştırılması, Uludağ Üniversitesi Müh. Mim. Fakültesi Dergisi, 12(1), 115-124.
  13. Yamankaradeniz, N., 2009