SavedAdd your journal

Journals / Uludağ Üniversitesi Mühendislik Fakültesi Dergisi / 2016 / Cilt: 21 - Sayı: 2

Manyetik Devre Tasarım Parametrelerinin Elektromekanik Supap Mekanizması Üzerindeki Etkilerinin İncelenmesi

INVESTIGATION OF THE EFFECTS OF THE MAGNETIC CIRCUIT DESIGN PARAMETERS ON THE ELECTROMECHANICAL VALVE ACTUATORS

ZELİHA KAMIŞ KOCABIÇAK
ELİF ERZAN TOPÇU
Pages
435–449
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Simulation and experimental results showed a good agreement with each other

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The paper describes the suitable type of magnetic circuits used in the electromechanical valve actuators (EVAs).
📊
Key Findings & Data:Two different types of EVA models with the disc type of magnetic circuits were designed and the effects of various design parameters such as spring constant, moving mass, supply voltage, holding force on the system were investigated.
💡
Conclusion & Impact:Simulation and experimental results showed a good agreement with each other
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

The paper describes the suitable type of magnetic circuits used in the electromechanical valve actuators (EVAs). Two different types of EVA models with the disc type of magnetic circuits were designed and the effects of various design parameters such as spring constant, moving mass, supply voltage, holding force on the system were investigated. The static and dynamic equations of the system were derived and their numerical solutions were obtained with MATLAB/Simulink program. The detailed theoretical analysis and experimental tests were carried out on the manufactured different prototypes of the EVAs. Simulation and experimental results showed a good agreement with each other

Özet

Bu çalışmada elektromekanik supap mekanizmalarında kullanılabilecek uygun manyetik devre tipleri incelenmiştir. Disk tipi manyetik devreye elektromekanik supap mekanizması iki farklı tipte tasarlanmış ve yay sabiti, kütle, besleme gerilimi ve tutma akımı gibi çeşitli tasarım parametrelerinin sistem üzerindeki etkileri incelenmiştir. Sistemin statik ve dinamik denklemleri çıkarılarak MATLAB/Simulink programı ile sayısal çözümleri elde edilmiştir. Prototip iki sistem üzerinde deneysel çalışmalar yürütülmüş ve teorik sonuçlarla karşılaştırılmıştır. Elde edilen sonuçlardan benzetim ve deneysel çalışmaların birbiriyle uyumlu olduğu görülmüştür

🔖

Cite This Article

KOCABIÇAK, Z. K., TOPÇU, E. E. (2016). Manyetik Devre Tasarım Parametrelerinin Elektromekanik Supap Mekanizması Üzerindeki Etkilerinin İncelenmesi. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Cilt: 21 - Sayı: 2, 435–449. https://ajindex.com/articles/330041

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (5)

  1. Park, SH., Lee, J., Yoo, J., Kim, D., Park, K. (2003) Effects of design and operating parameters on the static and dynamic performance of an electromagnetic valve actuator. Journal of Automobile Engineering, 217: 193-201. doi: 10.1243/09544070360550480 Nitu, C., Gramescu, B., Nitu, S. (2005) Application of electromagnetic actuators to a variable distribution system for automobile engines. Journal of Materials Processing Technology, 161: 253-257. doi:10.1016/j.jmatprotec.2004.07.032 Clark, RE., Jewell, GW., Forrest, SJ., Rens, J., Maerky, C. (2005) Design features for enhancing the performance of electromagnetic valve actuation systems. IEEE Transactions on Magnetics. 41-3: 1163-1168. doi:10.1109/TMAG.2004.843342. Cope, D., Wright, A. (2006) Electromagnetic Fully Flexible Valve Actuator, SAE Technical Paper 2006-01-0044, doi:10.4271/2006-01-0044.
  2. Chladny, RR., Koch, CR., Lynch, AF. (2005) Modeling automotive gas-exchange solenoid valve doi:10.1109/TMAG.2004.841701 IEEE Transactions on Magnetics 41-3: 1155-1162.
  3. Kamis, Z. (2005) The investigation of design and control of electromechanical actuator for engine valves (in Turkish). PhD Dissertation. University of Uludağ. Xiang, JY. (2002) Modeling and control of a linear electro-mechanical actuator (LEMA) for operating engine valves. Industry Applications Conference, 37th IAS Annual Meeting. Conference Record of the (Volume:3). doi: 10.1109/IAS.2002.1043799 Eyabi, P., Washington, G. (2006) Modeling and sensorless control of and electromagnetic valve actuator. Mechatronics. 16:159-175. doi:10.1016/j.mechatronics.2005.11.008. Peterson, KS. (2005) Control methodologies for fast & low impact electromagnetic actuators for engine valves. Dissertation. The University of Michigan. Mohamed, E. (2012) Modeling and performance evaluation of an electromechanical valve actuator for a camless IC engine. International Journal of Energy and Environment. 3-2: 275-294. ISSN: 2076-2895
  4. Velasco, CIH. (2011) Modelling, analysis, control and experimental validation of electromechanical valve actuators in automotive systems. Dissertation. University of Naples Federico II. Chukwuneke, JL., Achebe CH, Okolie PC, Anisiji OE (2013) Modelling of electromechanical control of camless internal combustion engine valve actuator. International Journal of Science and Engineering Investigations. 2-15: 123-136. ISSN: 2251-8843
  5. Topcu, EE., Kamis, Z., Yüksel, I. (2008) Simplified numerical solution of electromechanical doi:10.1016/j.mechatronics. 20