Journals / Politeknik Dergisi / 2020 / Cilt: 23 - Sayı: 3

Investigation of the Relationship Between the Current, Sound Level, Vibration and Surface Roughness Value of CuZn39Pb3 Material Processed in Lathe Machine

CuZn39Pb3 malzemenin torna tezgâhında işlenmesinde oluşan akım, ses şiddeti, titreşim ve yüzey pürüzlülük değeri arasındaki ilişkinin incelenmesi

Pages
615–624
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was investigated that there is a strong correlation between the increase of the machine current value and the sound level

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Numerous researches are being carried out for machining to meet the growing technology and increasing demand.
📊
Key Findings & Data:A significant part of them has been the examination of the relationship between cutting parameters and surface roughness, tool wear and cutting forces.
💡
Conclusion & Impact:It was investigated that there is a strong correlation between the increase of the machine current value and the sound level
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:CuZn39Pb3 · ses şiddeti · titreşim

Abstract

Numerous researches are being carried out for machining to meet the growing technology and increasing demand. A significant part of them has been the examination of the relationship between cutting parameters and surface roughness, tool wear and cutting forces. In recent years, researches are explained that vibrations, sound level and current value of the machine have been related to tool wear, surface roughness and cutting forces. With more economical and easy to use measurements, the machining process is more understandable and controllable. In this study, the relationship between CuZn39Pb3material in the CNC lathe machine, under the dry cutting conditions, 4 different feed rate, 5 different depth of cuts and 4 different cutting speeds effect on sound level, vibration, current value and surface roughness values. Analysed by RSM (Response Surface Methodology). Optimum cutting parameters are determined. As the increased of feed rate, surface roughness, Sound level, vibration and current value of the machine increased. Vibration value residue, surface roughness value and sound level increased. It was investigated that there is a strong correlation between the increase of the machine current value and the sound level

Özet

Gelişen teknoloji ve artan talep miktarını karşılamak üzere talaşlı imalata yönelik birçok araştırma yapılmaktadır. Bunların önemli bir kısmı kesme parametreleri ile yüzey pürüzlülüğü, takım aşınması ve kesme kuvvetlerinin ilişkisinin incelenmesi şeklinde olmuştur. Son yıllarda yapılan çalışmalarda titreşim, ses şiddeti ve tezgâhın çektiği akım değeri ile takım aşınması, yüzey pürüzlülüğü ve kesme kuvvetleri arasında ilişki kurulmuştur. Daha ekonomik ve alınması kolay ölçümler ile talaşlı imalat süreci daha anlaşılır ve kontrol edilebilir bir seviyeye gelmektedir. Bu çalışmada CNC torna tezgâhında, kuru kesme şartlarında, CuZn39Pb3 malzeme, 4 farklı ilerleme, 5 faklı talaş derinliği ve 4 farklı kesme hızında oluşan ses şiddeti, titreşim, tezgâhın çektiği akım değeri ve yüzey pürüzlülük değerleri arasındaki ilişki incelenmiştir. RSM (Response Surface Methodology) ile analiz edilmiştir. Optimum kesme parametreleri belirlenmiştir. İlerleme miktarı arttıkça yüzey pürüzlülük, ses şiddeti, titreşim ve tezgâhın çektiği akım değerinin arttığı görülmüştür. Titreşim değeri arttıkça, yüzey pürüzlülük değerinin ve ses şiddetinin artığı görülmüştür. Tezgâh akım değerinin artması ile ses şiddetinin arasında güçlü bir ilişki olduğu incelenmiştir.

🔖

Cite This Article

ŞAHİNOĞLU, A., GÜLLÜ, A. (2020). Investigation of the Relationship Between the Current, Sound Level, Vibration and Surface Roughness Value of CuZn39Pb3 Material Processed in Lathe Machine. Politeknik Dergisi, Cilt: 23 - Sayı: 3, 615–624. https://ajindex.com/articles/307432

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. G. Pantazopoulos, “A review of defects and failures in brass rods and related components,” Practical Failure Analysis, 3: 14-22, (2003).
  2. V. Bushlya, D. Johansson, F. Lenrick, J. Stahl ve F. Schultheiss, “Wear mechanisms of uncoated and coated cemented carbide tools in machining lead-free silicon brass,” Wear 377: 143-151, (2017).
  3. F. Schultheiss, D. Johansson, V. Bushlya, J. Zhou, K. Nilsson ve J. Stahl, “Comparative study on the machinability of lead-free brass,” Journal of Cleaner Production, 149: 366-377, (2017).
  4. M. Hanief, M. F. Wani ve M. Charoo, “Modeling and prediction of cutting forces during the turning of red brass (C23000) using ANN and regression analysis,” Engineering Science and Technology,, 20: 1220-1226, (2017).
  5. E. Brinksmeier, W. Preuss, O. Riemer ve R. Rentsch, “Cutting forces, tool wear and surface finish in high speed diamond machining,” Precision Engineering, 49: 293-304, (2017).
  6. C. He, W. Zong ve J. Zhang, “Influencing factors and theoretical modeling methods of surface roughness in turning process: State-of-the-art,” International Journal of Machine Tools and Manufacture, 129: 15-26, (2017).
  7. C. Moganapriya, R. Rajasekar, K. Ponappa, R. Venkatesh ve S. Jerome, “Influence of Coating Material and Cutting Parameters on Surface Roughness and Material Removal Rate in Turning Process Using Taguchi Method,” Materials Today:Proceedings, 5: 8532-8538, (2018).
  8. G. Zheng, R. Xu, X. Cheng, G. Zhao, L. Li ve J. Zhao, “Effect of cutting parameters on wear behavior of coated tool and surface roughness in high-speed turning of 300M,” Measurement, 125: 99-108, (2018).
  9. A. S. More, W. Jiang, W. D. Brown ve A. P. Malshe, “Tool wear and machining performance of cBN–TiN coated carbide inserts and PCBN compact inserts in turning AISI 4340 hardened steel,” Journal of Materials Processing Technology, 180: 253-262, (2006).
  10. S. R. Das, D. Dhupal ve A. Kumar, “Experimental investigation into machinability of hardened AISI 4140 steel using TiN coated ceramic tool,” Measurement, 62: 108-126, (2015).
  11. E. Aslan, N. Camuşcu ve B. Bingören, “Design optimization of cutting parameters when turning hardened AISI 4140 steel (63 HRC) with Al2O3 + TiCN mixed ceramic tool,” Materials & Design, 28: 1618-1622, (2007). İ. Asiltürk ve H. Akkuş, “Determining the effect of cutting parameters on surface roughness in hard turning using the Taguchi method,” Measurement, 44: 1697-1704, (2011).
  12. H. Aouici, M. A. Yallese, K. Chaoui, T. Mabrouki ve J. Rigal, “Analysis of surface roughness and