Journals / Politeknik Dergisi / 2002 / Cilt: 4 - Sayı: 0

Recyrstallization kinetics of Fe- % 5.23 V alloy at various degrees of deformation

Farklı deformasyon oranlarında Fe-% 5.23 V alaşımının yeniden kristalleşme kinetiği

Pages
15–19
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As expected, increase in the amount of deformation reduces the temperature of recrystallization where as in return, increases the rate of recrystallization.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this work, recrystallization kinetics of a Fe-5.23 %V binary alloy was studied.
📊
Key Findings & Data:Samples cold-worked at about 50 % and 70 % were subsequently annealed at 560, 570, 580 and 590 $\circ_C$ under oxygen free (controlled atmosphere) conditions.
💡
Conclusion & Impact:As expected, increase in the amount of deformation reduces the temperature of recrystallization where as in return, increases the rate of recrystallization.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this work, recrystallization kinetics of a Fe-5.23 %V binary alloy was studied. Samples cold-worked at about 50 % and 70 % were subsequently annealed at 560, 570, 580 and 590 $\circ_C$ under oxygen free (controlled atmosphere) conditions. It has been found that kinetics of recrystallization obeys an Avrami type equation with a temperature independent time exponent which takes almost aconstant value. As expected, increase in the amount of deformation reduces the temperature of recrystallization where as in return, increases the rate of recrystallization.

Özet

Bu çalışmada, Fe-% 5.23 V alaşımının yeniden kristalleşme kinetiği incelendi. % 50 ve % 70 deforme edilmiş Fe-% 5.23 V alaşımı atmosfer kontrollü olarak 560, 570, 580 ve 590 $\circ_C$' lerde tavlandı. Tavlama esnasında oluşan yeniden kristalleşme kinetiğinin Avrami denklemine uyduğu ve zaman üstü katsayının sıcaklığa bağımlı olmadığı, sabit değerler aldığı tespit edilmiştir. Beklendiği gibi, deformasyon oranının artmasıyla, yeniden kristalleşme sıcaklığının düştüğü ve yeniden kristalleşme hızının arttığı gözlenmiştir.

🔖

Cite This Article

BOSTAN, B., ÖZDEMİR, A. T. (2002). Recyrstallization kinetics of Fe- % 5.23 V alloy at various degrees of deformation. Politeknik Dergisi, Cilt: 4 - Sayı: 0, 15–19. https://ajindex.com/articles/306923

References (1)

  1. Gladman., T., Mc Ivor., I.D. and Dulieu., D., in Proceedings of the International Conference on Microalloying 75, Washington, USA, 32, October 1975 2. Honeycombe., R.W.K., Met. Trans. A., 7A, 915, 1976 3. Aronsson., D., in “Climax Molydenium Symposium on Steel str. Mechanisms”, Zürich, Switzerland, 77, 1969 4. Sekine., H., Trans. Iron Steel Inst., Jpn. 8, 101, 1968 5. Christian., J.W., The Theory of the Transformations in Metals. Pergaman Press, New York, 1970 6. Verhoeven., J.D., Fundamentals of Physical Metallurgy, John Wiley U.S.A, 1975 7. Chan., R.W., Acta Met., 4, 449, 1956 8. Chan., R.W., Physical Metallurgy, North Holland, Amsterdam 9. Özdemir., A. T. High Temperature Annealing of Cold Worked and Nitrided 1% V-Fe Alloy M.E.T.Ü. Master Thesis, 1984 10. Beck., P.A. and Sperry,P.R. Trans., AIME, 180-240, 1949 11. Özdemir., A.T., Atasoy., Ö.E., Journal of Materials Science, 33, 2683-2690, 1998 12. Recrystallization, Grain Growth and Texture, ASM, City., 1966 13. Akalın., S., İşletme İstatistiği Ege Üniversitesi İşletme Bölümü Bornova-İzmir, 1977