Journals / Politeknik Dergisi / 2014 / Cilt: 17 - Sayı: 1

ulaşacaktır. Veriler incelendiğinde

Atık Lastik Agregalı Harçların Mekanik ve Fiziksel Özelliklerinin İncelenmesi

Pages
3–7
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Therefore, waste tire mortars can be used where light weight and sound insulation properties are desired.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Waste tires are one of the important problem of today.
📊
Key Findings & Data:For this purpose, physical and mechanical tests were conducted on waste tire mortars at 7thand 28thday.
💡
Conclusion & Impact:Therefore, waste tire mortars can be used where light weight and sound insulation properties are desired.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

Waste tires are one of the important problem of today. In this study, waste automobile tires are used as aggregate to produce mortars and properties of mortars were investigated. For this purpose, physical and mechanical tests were conducted on waste tire mortars at 7thand 28thday. Furthermore, microstructures of mortar specimens were investigated by scanning electron microscope (SEM). In experiments, tire aggregate was used at three types of grain sizes. Tire aggregate was used in mortar mixtures instead of sand with the volumetric proportions of 0, 10, 20, 30, 40, 50 %. According to experimental results, compressive and flexural strength and ultrasonic pulse velocity of waste tire mortars were lower compared to control specimens. Therefore, waste tire mortars can be used where light weight and sound insulation properties are desired.

Özet

Atık taşıt lastikleri günümüzde önemli sorunlardan birisidir. Bu çalışmada, atık otomobil lastikleri agrega yerine kullanılarak harçlar üretilmiş ve harçların özellikleri araştırılmıştır. Bu amaçla atık lastikli harçlarda 7. ve 28. gün sonunda mekanik ve fiziksel testler yapılmıştır. Ayrıca, harç numunelerinin içyapıları taramalı elektron mikroskobu (SEM) ile araştırılmıştır. Deneylerde, lastik agregası harçlarda üç farklı tane boyutunda kullanılmıştır. Lastik agrega harç karışımlarında kum yerine hacimce % 10, 20, 30, 40 ve 50 oranlarında kullanılmıştır. Deneysel sonuçlara göre lastik agregalı harçların normal harçlara göre basınç ve eğilme dayanımları ve ultrases geçiş hızları daha düşüktür. Bu nedenle, atık lastikli harçlar hafiflik ve ses yalıtımı özellikleri istenilen yerlerde kullanılabilir.

🔖

Cite This Article

TOPÇU, İ. B., KARAKURT, C., IŞIKDAĞ, B. (2014). ulaşacaktır. Veriler incelendiğinde. Politeknik Dergisi, Cilt: 17 - Sayı: 1, 3–7. https://ajindex.com/articles/306608

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. Fedroff, D., Ahmad, S., Savaş, B. Z., "Mechanical Properties of Concrete with Ground Waste Tire Rubber." Transportation Research Record No. 1532, Transportation Research Board, Washington, DC, (1996).
  2. Topçu, İ. B., Eser, Ö. F., "Lastik Agregalı Betonların Özelikleri", Balıkesir Üniv., Müh.-Mim. Fak., III. Balıkesir Müh.-Mim. Semp., ss. 173-181, Balıkesir, 10- Nisan, (1995).
  3. Akhras, N. M., Smadi, M. M., "Properties of tire rubber ash mortar", Cement and Concrete Composites, Vol., No. 9, pp. 1727-1734, (2004).
  4. Sukontasukkul, P., Chaikaew, C. "Properties of concrete pedestrian block mixed with crumb rubber", Construction and Building Materials, Vol. 20, No. 7, pp. 450-457, (2006). Scrap Tire Markets in the United States, 9thBiennial Report, Rubber Manufacturers Association, Washington DC, 85 p., (2009).
  5. Li, G., Stubblefield, M. A., Garrick, G., Eggers, J., Abadie, C., Huang, B., "Development of waste tire modified concrete", Cement and Research,Vol. 34, No. 12, pp. 2283-2289, (2004).Concrete Topçu, İ.B., Demir, A., "Durability of Rubberized Mortar and Concrete", ASCE, Journal of Materials in Civil Engineering, Vol.19, pp.173-178, (2007).
  6. Topçu, İ. B., "Properties of Concretes Containing Waste Rubber Chips", 3rd International Symposium on Environmental Geotechnology, pp. 386-394,
  7. San Diego CA, USA, June 10-12, (1996).
  8. Topçu, İ. B., "The properties of rubberized concretes", Cement and Concrete Research, Vol. 25, No. 2, pp. 304-, (1995).
  9. Topçu, İ. B., "Assessment of the brittleness index of rubberized concretes", Cement and Concrete Research, Vol. 27, No. 2, pp. 177-183, (1997).
  10. Fattuhi, N., Clark, L., "Cement-based materials containing shredded scrap truck tire rubber", Construction and Building Materials, Vol. 10, No., pp. 478-496, (1996).
  11. G. Gregory, J. Eggers, C. Abadie, M. A. Stubblefield, "Waste tire fiber modified concrete", Composites Part B: Engineering, Vol. 35, No. 4, pp. 305-312, (2004).
  12. Rad, E., "Rubberized Concrete", New Horizons in Construction Materials Envo Publishing Company, Vol., pp. 287-292, (1976).
  13. Turgut P., Yeşilata B., Işıker, Y., "Kompozit Yapı Malzemelerinde Isıl Özellik Ölçümü-2: Hurda Lastik Katkılı Betonlar için Ölçüm Sonuçları", Mühendis ve Makina, Cilt 48, 33- 39, (2007).
  14. Chou, LH., Yang, CK., Lee, MT., Shu, CC. "Effects of partial oxidation of crumb rubber on properties of rubberized mortar", Composites: Part B, Vol. 41, pp.613-, (2010).