Journals / Journal of Scientific Reports-A / 2026 / Issue: 030

STATISTICAL EVALUATION OF CONCRETE PRODUCED IN KÜTAHYA

KÜTAHYADA ÜRETİLEN BETONLARIN İSTATİSTİKSEL OLARAK DEĞERLENDİRİLMESİ

Pages
56–63
Publication Date
2013-04-15
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

As a result, it is concluded that the C30/37 concretes, which were taken as an example in Kütahya, were met codes at high levels, but also passing the upper class was relatively low, therefore, as a result of this review concretes are produced compliance with standards and economic in Kütahya.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, it was investigated distribution of compressive strength of concrete specimens which were produced in various work-sites and brought to laboratory at 2011 in Kütahya.
📊
Key Findings & Data:Totally 1023 laboratory specimens were utilized and it was tried analyze statistically, the quality of concrete in Kütahya city.
💡
Conclusion & Impact:As a result, it is concluded that the C30/37 concretes, which were taken as an example in Kütahya, were met codes at high levels, but also passing the upper class was relatively low, therefore, as a result of this review concretes are produced compliance with standards and economic in Kütahya.
🔬Design:Review & Systematic Survey
📍Scope:2011 Verileri
⚙️Variables:Beton · Basınç dayanımı · istatistiksel değerlendirme

Abstract

In this study, it was investigated distribution of compressive strength of concrete specimens which were produced in various work-sites and brought to laboratory at 2011 in Kütahya. Totally 1023 laboratory specimens were utilized and it was tried analyze statistically, the quality of concrete in Kütahya city. As a result, it is concluded that the C30/37 concretes, which were taken as an example in Kütahya, were met codes at high levels, but also passing the upper class was relatively low, therefore, as a result of this review concretes are produced compliance with standards and economic in Kütahya.

Özet

Bu çalışmada Kütahya ili ve çevresinde 2011 yılında çeşitli şantiyelerde üretilip, basınç dayanımlarını belirlemek amacıyla laboratuvara getirilen beton numunelerinden C30/37 betonlarının basınç dayanımlarının dağılımları incelenmiştir. Toplam 1023 adet deney sonucundan yararlanılmış ve istatistiksel olarak Kütahya ilinde beton kalitesinin ne seviyelerde olduğu belirlenmeye çalışılmıştır. Sonuç olarak Kütahya ilinde örnek olarak alınan C30/37 betonlarında standartların büyük ölçüde sağlandığı, bunun yanında bir üst beton sınıfına sarkmaların ise az olduğu, bu nedenle 2011 yılı içinde inceleme sonuçlarına göre Kütahya ilinde hem standartlara uygun hem de ekonomik beton üretildiği sonucuna varılmıştır.

🔖

Cite This Article

Topçu, İ. B., Ateşin, Ö. (2013). STATISTICAL EVALUATION OF CONCRETE PRODUCED IN KÜTAHYA. Journal of Scientific Reports-A, Issue: 030, 56–63. https://ajindex.com/articles/1512185

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (14)

  1. İ. B. Topçu, A. Demir, "Eskişehir’de Dökülen Betonların Niteliği Üzerine İstatistiksel Bir Değerlendirme", Eskişehir Osmangazi Üniversitesi, Müh.-Mim. Fak. Dergisi, Cilt XVII, S. 2, ss. 1-10, 2004.
  2. Bayındırlık ve İskân Bakanlığı, “Deprem Bölgelerinde Yapılacak Binalar Hakkında Yönetmelik”, 2007.
  3. İ. B. Topçu, A. R. Boğa, "Eskişehir’deki Hazır Beton Firmalarının Beton Kalitelerinin İstatistiksel Değerlendirilmesi", Eskişehir Osmangazi Üniversitesi, Müh.-Mim. Fak. Dergisi, Cilt XVIII, S. 1, ss. 1-13, 2005.
  4. M. Beyazıt, E. B. Yeğen Oğuz, “Mühendisler İçin İstatistik”, İstanbul Teknik Üniversitesi, İnşaat Fakültesi, 2005.
  5. ACI 214 nolu komitesi (American Concrete Institute - Amerikan Beton Enstitüsü).
  6. İ. B. Topçu, C. Sevil, "Sultandere Betonlarının Kalitelerinin İncelenmesi", Deprem Semineri 1, ODTÜ ve Osmangazi Üniversitesi, Eskişehir, 21 Mayıs 1999, ss. 67-80.
  7. İ. B. Topçu, "Eskişehir’de Küçük ve Büyük Şantiyelerde Üretilen Yerinde Yapılmış Betonların Kalite Kontrolü", 1. Ulusal Beton Kongresi, 24-26 Mayıs 1989, İstanbul, ss. 189-198.
  8. E. Öztekin, A. Suvakçı, "İstanbul Betonarme Betonlarının Sektör Bazında Karşılaştırmalı Kalite İncelenmesi", 3. Ulusal Beton Kongresi, 19-21 Ekim 1994, İstanbul, ss. 1141-149.
  9. E. Öztekin, A. Suvakçı, "İstanbul’da Hazır Beton Kullanılan Yapılarda Sınıf Dayanımının İncelenmesi", 3. Ulusal Beton Kongresi, 19-21 Ekim 1994, İstanbul, ss. 105-114.
  10. S. Akyüz, M. Uyan, "İstanbul ve Çevresinde Betonların Niteliği Üzerine Bir İnceleme", 1. Ulusal Beton Kongresi, 24-26 Mayıs 1989, ss. 160-171.
  11. M. Uyan, S. Akyüz, H. Yıldırım, "İstanbul ve Çevresinde Dökülen Betonlar Üzerine Bir Değerlendirme", Hazır Beton Dergisi, Ocak-Şubat 1999, ss. 26-30.
  12. F. Kocataşkın, "Beton Üretiminde İstatistik Kalite Kontrolü", İMO İstanbul Şubesi, Beton Teknolojisi ve Sorunları Semineri, İstanbul, 1976, 10s.
  13. S. Akman, “Beton Kalitesinin Yapı Güvenliği Açısından Önemi”, İMO 1. Ulusal Beton Kongresi Bildirileri Kitabı, Mayıs 1989, İstanbul, ss. 6-12.
  14. İ. B. Topçu, A. Uğurlu, “TS 500/2000 Standardının Beton Açısından İncelenmesi”, ECAS2002 Uluslararası Yapı ve Deprem Mühendisliği Sempozyumu, 14 Ekim 2002, Orta Doğu Teknik Üniversitesi, Ankara, Türkiye, ss. 492-499.