Journals / Politeknik Dergisi / 2020 / Cilt: 23 - Sayı: 2

XRD vs Raman for InGaN/GaN Structures

Pages
291–296
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

According to Raman peak center data, these white regions are detected as white rust.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, InGaN/GaN structures are grown by using Metal Organic Chemical Vapor Deposition (MOCVD) technique.
📊
Key Findings & Data:Some structural, optical and morphological properties of InGaN/GaN structures are investigated in detail.
💡
Conclusion & Impact:According to Raman peak center data, these white regions are detected as white rust.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:XRD · InGaN · GaN

Abstract

In this study, InGaN/GaN structures are grown by using Metal Organic Chemical Vapor Deposition (MOCVD) technique. Some structural, optical and morphological properties of InGaN/GaN structures are investigated in detail. For structural analysis, X-ray diffraction (XRD), for optical, Raman and morphological, Atomic Force Microscopy (AFM) measurement techniques are used. In XRD analysis both samples presented hexagonal crystal structure. XRD peaks for these two samples showed small differences dependent on growth conditions. Strain and stress values are determined from XRD and they are compared with Raman results. In Raman analysis, five different chemicals are determined in both samples. Raman analysis results are in good accordance with XRD, growth conditions and AFM images. In AFM images, there can be seen hills and holes and they are partly homogeneous. There are also some white regions in AFM images. According to Raman peak center data, these white regions are detected as white rust.

Özet

In this study, InGaN/GaN structures are grown by using Metal Organic Chemical Vapor Deposition (MOCVD) technique. Some structural, optical and morphological properties of InGaN/GaN structures are investigated in detail. For structural analysis, X-ray diffraction (XRD), for optical, Raman and morphological, Atomic Force Microscopy (AFM) measurement techniques are used. In XRD analysis both samples presented hexagonal crystal structure. XRD peaks for these two samples showed small differences dependent on growth conditions. Strain and stress values are determined from XRD and they are compared with Raman results. In Raman analysis, five different chemicals are determined in both samples. Raman analysis results are in good accordance with XRD, growth conditions and AFM images. In AFM images, there can be seen hills and holes and they are partly homogeneous. There are also some white regions in AFM images. According to Raman peak center data, these white regions are detected as white rust.

🔖

Cite This Article

BİLGİLİ, A., AKPINAR, Ö., ÖZTÜRK, M. K., ÖZÇELİK, S., ÖZBAY, E. (2020). XRD vs Raman for InGaN/GaN Structures. Politeknik Dergisi, Cilt: 23 - Sayı: 2, 291–296. https://ajindex.com/articles/306321

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (15)

  1. Huang, C.F., et al., Characterization of InGaN-based photovoltaic devices by varying the indium contents. Thin Solid Films, 2013. 529: p. 278-281
  2. Neudeck, P.G., R.S. Okojie, and L.Y. Chen, High-temperature electronics - A role for wide bandgap semiconductors? Proceedings of the Ieee, 2002. 90(6): p. 1065-1076
  3. Monemar, B., Paskov, P. P., Kasic, A., ―Optical properties of InN—the bandgap question‖, Supperlatt. Microstruct., 38 (2005) 38
  4. Nanishi,Y., Saito, Y., Yamaguchi, T., ―RF-Molecular Beam Epitaxy Growth and Properties of InN and Related Alloys‖, Japan J. Appl. Phys., 42 (2003) 2549
  5. Lee, S. N., Tan, S., Lee, W., Paek, H., Seon, M., Lee, I. H., Nam, O., Park, Y., “Characterization of optical and crystal qualities in InxGa1–xN/InyGa1–yN multi-quantum wells grown by MOCVD, J. Cryst. Growth, 250 (2003) 256
  6. Lafont, U., Zeijl, H., Zwaag, S. (2012). Increasing the reliability of solid state lighting system via self-healing approaches, Microelectronic Reliability, 52(1), 71- 89
  7. Akpinar, O., et al., On the elastic properties of INGAN/GAN LED structures. Applied Physics a-Materials Science & Processing, 2019. 125(2)
  8. Oura, K., Lifshitsi V. G., Saranin, A. A., Zotov, A. V., Katayama, M. (2003). Surface science (First edition). Berlin: Springer,166, 229, 378-382
  9. Arulkumaran, S., Egawa, T., Ishikawa, H., and Jimbo, T.(2003). Characterization of different-Al-content AlxGa1-xN/GaN hetrostructures and high-electron-mobility transistors on sapphire, Journal of Vacuum Science & Technology, 21( 2), 888-894
  10. Akasaki, I. and H. Amano, Breakthroughs in Improving Crystal Quality of GaN and Invention of the p-n Junction Blue-Light-Emitting Diode (vol 45, pg 9001, 2006). Japanese Journal of Applied Physics, 2008. 47(5): p. 3781-3781
  11. O. Ambacher. (1998). Growth and applications of Group III-nitrides, Journal of Applied, 31(1), 2653–2710
  12. Vickers, M. E., Kappers, M. J., Datta, R., McAleese, C., Smeeton, T. M., Rayment F. D. G., and Humphreys, C. J. (2005). In-plane imperfections in GaN studied by x-ray diffraction, Journal of Physics D: Applied Physics, 38(A10), A99-A104
  13. Moram, M.A. and M.E. Vickers, X-ray diffraction of III-nitrides. Reports on Progress in Physics, 2009. 72(3)
  14. H. Yu, M. K. Ozturk, S. Ozcelik, E. Ozbay, J. Cryst. Growth 293, 273 (2006)
  15. Harutyunyan, V. S., Aivazyan, A. P., Weber, E. R., Kim, Y., Park, Y., Subramanya, S. G. (2001). High resolution x-ray diffraction strain-stress analysis of