Journals / Politeknik Dergisi / 2019 / Cilt: 22 - Sayı: 1

Lattice Parameters a-, c-, Strain-Stress Analysis and Thermal Expansion Coefficient of InGaN/GaN Solar Cell Structures Grown by MOCVD

Pages
33–39
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It can be seen that all these results are in accordance with previous works done by different authors and with the real values.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Structural properties of InGaN/GaN solar cells (SCs) grown by metal organic chemical vapor deposition (MOCVD) technique are investigated by high resolution X-ray diffraction (HR-XRD) method.
📊
Key Findings & Data:Fault percentage of the a- and c- lattice parameters are also calculated.
💡
Conclusion & Impact:It can be seen that all these results are in accordance with previous works done by different authors and with the real values.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Structural properties of InGaN/GaN solar cells (SCs) grown by metal organic chemical vapor deposition (MOCVD) technique are investigated by high resolution X-ray diffraction (HR-XRD) method. It is noticed that a- and c- lattice parameters of the structures showed small differences according to examined (hkl) planes. Fault percentage of the a- and c- lattice parameters are also calculated. It is seen that fault percentage is smaller than %2 for all samples. Investigations have been made for three different samples. Differences in crystal quality caused by growth conditions are seen in all three samples. At the same time, properties such as crystal size, strain and stress are determined. During determination of stress, two different methods including elastic constants, Young module and Poisson ratio are used. Results gained from these two methods are compared with each other. Thermal expansion coefficients of InGaN are calculated for (002), (004), (006) and (121) planes for 100 oC temperature difference (300-400 oC). It is seen that peak positions gained from HR-XRD are nearly the same with the ones in database. All the results obtained from calculations are given in tables in the following sections of this article. It can be seen that all these results are in accordance with previous works done by different authors and with the real values.

🔖

Cite This Article

BİLGİLİ, A., AKPINAR, Ö., KURTULUŞ, G., ÖZTÜRK, M. K., ÖZÇELİK, S., ÖZBAY, E. (2019). Lattice Parameters a-, c-, Strain-Stress Analysis and Thermal Expansion Coefficient of InGaN/GaN Solar Cell Structures Grown by MOCVD. Politeknik Dergisi, Cilt: 22 - Sayı: 1, 33–39. https://ajindex.com/articles/230783

References (15)

  1. Nakamura S., Pearton S., Fasol G., “The Blue Laser Diode”, (2000)
  2. Davydov V.Y.; Klochikhin A.A.; Seisyan R. P.; Emtsev V.V.; Ivanov S.V.; Bechstedt F.; Furthmuller J.; Harima H.; Mudryi A.V.; Aderhold J.; Semchinova O.; Graul J., “Absorption and emission of hexagonal InN. Evidence of narrow fundamental band gap”, Physica Status Solidi BBasic Solid State Physics,, 229 (3): R1-R3, (2002)
  3. Matsuoka T.; Okamoto H.; Nakao M.; Harima H.; Kurimoto E., “Optical bandgap energy of wurtzite InN”, Appl Phys Lett, 81 (7): 1246-1248, (2002)
  4. Green M. A.,” Recent developments and future prospects for third generation and other advanced cells” Conference Record of the 2006 IEEE 4th World Conference on Photovoltaic Energy Conversion, 1-2: 15-19, (2006)
  5. Luque A.; Marti A., “A Metallic Intermediate Band High Efficiency Solar Cell”, Prog Photovoltaics, 9: 73-86, (2001)
  6. Fetzer C. M.; King R. R.; Colter P. C.; Edmondson K. M.; Law D. C.; Stavrides A. P.; Yoon H.; Ermer J. H.; Romero M. J.; Karam N. H., “High-Efficiency Metamorphic Gainp/Gainas/Ge Solar Cells Grown by Movpe”, J Cryst Growth, 261: 341-348, (2004
  7. Law D. C.; Fetzer C. M.; King R. R.; Colter P. C.; Yoon H.; Isshiki T. D.; Edmondson K. M.; Haddad M.; Karam N. H., “Multijunction Solar Cells with Subcell Materials Highly Lattice-Mismatched to Germanium”, Ieee Phot Spec Conf, 575-578, (2005)
  8. Dridi Z.; Bouhafs B.; Ruterana P., “First-Principles Investigation of Lattice Constants and Bowing Parameters in Wurtzite Alxga1-Xn, Inxga1-Xn and Inxal1-Xn Alloys”, Semicond Sci Tech, 18: 850-856, (2003)
  9. Birks L. S. a. F., H.,” Particle Size Determination from X-Ray Line Broadening”, J Appl Phys, 17: (1946)
  10. Delhez R.; Dekeijser T. H.; Mittemeijer E. J., “Determination of Crystallite Size and LatticeDistortions through X-Ray-Diffraction Line-Profile Analysis - Recipes, Methods and Comments”, Fresen Z Anal Chem, 312: 1-16, (1982
  11. Wassermann G. and G., J., “Texturen Metallischer Werkstoffe”, (1962)
  12. Moram M. A.; Vickers M. E.,” X-Ray Diffraction of IiiNitrides”, Rep Prog Phys, 72, (2009)
  13. Kisielowski C., et al., “Strain-Related Phenomena in Gan Thin Films”, Phys Rev B 54: 17745-17753, (1996)
  14. Suryanarayana C. a. N., M. G., “X-Ray Diffraction”, (1996)
  15. Serway R. A. a. B., R. J.,” Physics for Scientists and Engineers”, (2000).