Journals / Politeknik Dergisi / 2021 / Cilt: 24 - Sayı: 1

Effect of the TiO2 Concentration On the Photocatalytic Self-Cleaning Properties Of Polyethylene Teraphthalate Fibers

Polietilen Teraftalat (PET) Liflerde Katkılanan TiO2 Konsantrasyonunun Fotokatalitik Kendini Temizleme Özelliklerine Etkisi

Pages
121–129
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

In the range of studied concentrations of TiO2 it is observed that self-cleaning properties can be achieved without significantly sacrificing from the mechanical properties of the fibers.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this article self-cleaning properties of polyethyleneterephthalate (PET) fibers is investigated as a function of TiO2 particle content added during fiber spinning.
📊
Key Findings & Data:Furthermore the mechanical properties of the fibers with various amounts of TiO2 content were compared.
💡
Conclusion & Impact:In the range of studied concentrations of TiO2 it is observed that self-cleaning properties can be achieved without significantly sacrificing from the mechanical properties of the fibers.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:polietilen teraftalat · titanyum oksit · kendini temizleme

Abstract

In this article self-cleaning properties of polyethyleneterephthalate (PET) fibers is investigated as a function of TiO2 particle content added during fiber spinning. After fibers were spun they were woven and stained with black tea, coffee, cherry juice, and ketchup. The sample fabrics were then exposed to different light sources such as daylight and solar simulator to monitor the stain removal over time. Furthermore the mechanical properties of the fibers with various amounts of TiO2 content were compared. Morphologies of the fibers were investigated with both optical and scanning electron microscopes (SEM). Using the differential scanning calorimeter (DSC) the crystallization behavior of the samples was compared. In the range of studied concentrations of TiO2 it is observed that self-cleaning properties can be achieved without significantly sacrificing from the mechanical properties of the fibers.

Özet

Bu çalışmada eğirme esnasında katkılanan TiO2 miktarına bağlı olarak, polietilen tereftalat liflerde (PET) kendi kendini temizleme özelliği incelenmektedir. Lifler eğirildikten sonra dokunarak siyah çay, kahve, vişne suyu ve ketçap ile lekelenmiştir. Ardından numune kumaşlar gün ışığı ve Xenon lamba gibi farklı ışık koşullarına maruz bırakılarak lekelerin zamanla giderimi incelenmiştir. Ayrıca, üretilen katkılı liflerin mekanik performansı katkısız lifler ile kıyaslanmış ve morfolojileri, optik ve taramalı elektron mikroskopları (SEM) ile analiz edilmiştir. Diferansiyel taramalı kalorimetre (DSC) kullanılarak liflerin kristallenme davranışlarında farklılık olup olmadığı analiz edilmiştir. Yapılan çalışma neticesinde; liflerin mekanik özelliklerinde ve kristallenme davranışlarında çalışılan katkılama oranı aralığına göre, büyük değişimler olmadan fotokatalitik etki sayesinde kumaşa kendi kendini temizleme özelliği kazandırılabileceği tespit edilmiştir.

🔖

Cite This Article

BATUR, Z., AKYILDIZ, H. İ. (2021). Effect of the TiO2 Concentration On the Photocatalytic Self-Cleaning Properties Of Polyethylene Teraphthalate Fibers. Politeknik Dergisi, Cilt: 24 - Sayı: 1, 121–129. https://ajindex.com/articles/306248

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. A. Fujishima and K. Honda, “Electrochemical photolysis of water at a semiconductor electrode,” Nature, vol. 238, no. 5358, pp. 37–38, 1972
  2. J.-M. Herrmann, “Heterogeneous photocatalysis: fundamentals and applications to the removal of various types of aqueous pollutants,” Catalysis today, vol. 53, no. 1, pp. 115–129, 1999
  3. A. L. Linsebigler, G. Lu, and J. T. Yates Jr, “Photocatalysis on TiO2 surfaces: principles, mechanisms, and selected results,” Chemical Reviews, vol. 95, no. 3, pp. 735–758, 1995
  4. N. Daneshvar, D. Salari, and A. R. Khataee, “Photocatalytic degradation of azo dye acid red 14 in water on ZnO as an alternative catalyst to TiO2,” Journal of photochemistry and photobiology A: chemistry, vol. 162, no. 2, pp. 317–322, 2004
  5. J. Liqiang et al., “Review of photoluminescence performance of nano-sized semiconductor materials and its relationships with photocatalytic activity,” Solar energy materials and solar cells, vol. 90, no. 12, pp. 1773–1787, 2006
  6. K. Hashimoto, H. Irie, and A. Fujishima, “TiO2 photocatalysis: a historical overview and future prospects,” Japanese journal of applied physics, vol. 44, no. 12R, p. 8269, 2005
  7. H. Kyung, J. Lee, and W. Choi, “Simultaneous and synergistic conversion of dyes and heavy metal ions in aqueous TiO2 suspensions under visible-light illumination,” Environmental science & technology, vol. 39, no. 7, pp. 2376–2382, 2005
  8. O. Akhavan, R. Azimirad, S. Safa, and M. M. Larijani, “Visible light photo-induced antibacterial activity of CNT–doped TiO2 thin films with various CNT contents,” Journal of Materials Chemistry, vol. 20, no. 35, pp. 7386–7392, 2010
  9. R. Asahi, T. Morikawa, T. Ohwaki, K. Aoki, and Y. Taga, “Visible-light photocatalysis in nitrogen-doped titanium oxides,” Science, vol. 293, no. 5528, pp. 269–271, 2001
  10. K. Huang, L. Chen, J. Xiong, and M. Liao, “Preparation and characterization of visible-light-activated Fe-N Co-doped TiO2 and its photocatalytic inactivation effect on leukemia tumors,” International Journal of Photoenergy, vol. 2012, 2012
  11. M. Yurddaşkal, U. Kartal, and E. C. Doluel, “Production of Titanium Dioxide/Reduced Graphene Oxide Composites and Investigation of Their Photocatalytic Properties,” Politeknik Dergisi, pp. 0–0, Dec. 2019, doi: 10.2339/politeknik.537900
  12. J. Kim, C. W. Lee, and W. Choi, “Platinized WO3 as an environmental photocatalyst that generates OH radicals under visible light,” Environmental science & technology, vol. 44, no