Journals / Research on Engineering Structures and Materials / 2020 / Cilt: 6 - Sayı: 1

Compression after impact properties of glass fiber/epoxy/MWCNT composite

Pages
53–62
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Due to the existing of the carbon nanotubes between fiber and polymer matrix was the reason of the improvement of the mechanical properties of carbon nanotubes integrated composites.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Glass fiber/epoxy resin/multi-walled carbon nanotubes (MWCNTs) were used to fabricate the nano materials integrated thermoset composite materials in this study.
📊
Key Findings & Data:The samples with MWCNTs demonstrated the best improvement of the compression after impact modulus and strength with 31% and 5.6% compared to the samples without carbon nanotubes.
💡
Conclusion & Impact:Due to the existing of the carbon nanotubes between fiber and polymer matrix was the reason of the improvement of the mechanical properties of carbon nanotubes integrated composites.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Glass fiber/epoxy resin/multi-walled carbon nanotubes (MWCNTs) were used to fabricate the nano materials integrated thermoset composite materials in this study. Thermoset composites with and without nano materials were fabricated using resin transfer molding (RTM) methods. The fabricated samples were tested with compression after impact and charpy impact tests. The samples with MWCNTs demonstrated the best improvement of the compression after impact modulus and strength with 31% and 5.6% compared to the samples without carbon nanotubes. The nano materials integrated specimens showed 10.2% improvement of charpy impact strength against specimens without carbon nanotubes in 90° degree direction. Due to the existing of the carbon nanotubes between fiber and polymer matrix was the reason of the improvement of the mechanical properties of carbon nanotubes integrated composites.

🔖

Cite This Article

DEMİRCAN, Ö. (2020). Compression after impact properties of glass fiber/epoxy/MWCNT composite. Research on Engineering Structures and Materials, Cilt: 6 - Sayı: 1, 53–62. https://ajindex.com/articles/302679

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (10)

  1. Meyyappan M. Carbon Nanotubes Science and Applications, CRC Press, New York, ISBN 9780849321115, 2005.
  2. Demircan Ö, Çolak P, Kadıoğlu K, Günaydın E. Flexural properties of glass fiber/epoxy/MWCNT composites. Research on Engineering Structures and Materials, 2019; 5 (2): 91-98 [3] Bilişik A,Sapanci E, Karaduman N. Short beam shear of nanoprepreg/nanostitched three dimensional carbon/epoxy multiwall carbon nanotubes composites. Journal of Composite Materials, 2019; 54: 2-19
  3. Bilişik A, Sapanci E. Plain para-aramid/phenolic multiwall carbon nanotubes prepreg/multistitched preform composites: Experimental characterization of mode-I toughness, Journal of Composite Materials, 2019; 53 (13): 1847-1864.
  4. Eskizeybek V, Avcı A and Gulce A. Preparation and mechanical properties of carbon nanotube grafted glass fabric/epoxy multi-scale composites. Advanced Composite Materials, 2017; 26: 169-180.
  5. Eskizeybek V, Avcı A and Gulce A. The Mode I interlaminar fracture toughness of chemically carbon nanotube grafted glass fabric/epoxy multi-scale composite structures. Composite Part A, 2014; 63: 94-102.
  6. Mannov E, Schmutzler H, Chandrasekaran S, Viets C, Buschhorn S, Tölle F, MülhauptR, Schulte K. Improvement of compressive strength after impact in fibre reinforced polymer composites by matrix modification with thermally reduced graphene oxide. Composites Science and Technology, 2013; 87: 36-41.
  7. Gorbatikh L, Verpoest I, Lomov VS, Claes M, Tola C, Siegfried M. Impact and residual after impact properties of carbon fiber/epoxy composites modified with carbon nanotubes, Composites Structures, 2014; 111: 488-496.
  8. Ye L, Tang Y, Zhang Z, Friedrich K. Interlaminar fracture toughness and CAI strength of fibre-reinforced composites with nanoparticles -A review. Composites Science and Technology, 2013; 86: 26-37.
  9. Yokozeki T, Iwahori Y, Ishiwata S, Enomoto K. Mechanical properties of CFRP laminates manufactured from unidirectional prepregs using CSCNT-dispersed epoxy. Composite Part A, 2007; 38: 2121-2130.
  10. Kostopoulos V, Baltopoulos A, Karapappas P, Vavouliotis A, Paipetis A. Impact