Journals / Research on Engineering Structures and Materials / 2016 / Cilt: 2 - Sayı: 1

Optimum design of cold-formed thin-walled sections subjected to axial and bi-axial bending using artificial bee colony algorithm

Pages
29–37
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

A design example is included to demonstrate the efficiency of the optimum design algorithm developed.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Sustainable development in construction industry is emerging as a major issue among cities and communities in the current century.
📊
Key Findings & Data:As global climate change becomes an increasingly serious concern for the future and construction industry dependence on fossil fuels for energy creates greater adverse influence on human health and natural environment, an interest in high-efficient, low environmental impact buildings has begun to transform the notion of building design, construction, and operation.
💡
Conclusion & Impact:A design example is included to demonstrate the efficiency of the optimum design algorithm developed.
🔬Design:Modeling & Simulation
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Sustainable development in construction industry is emerging as a major issue among cities and communities in the current century. As global climate change becomes an increasingly serious concern for the future and construction industry dependence on fossil fuels for energy creates greater adverse influence on human health and natural environment, an interest in high-efficient, low environmental impact buildings has begun to transform the notion of building design, construction, and operation. As it stands, the most of the standard buildings in the world consume an extraordinary amount of resources while taking an enormous toll on the environment. The utilization of cold-formed thinwalled open steel sections in structural sites supplies green structural opportunities demanding less material and cost while providing high strength. The developed algorithm for this study obtains the optimum geometric dimensions of cold-formed thin-walled open steel sections under various external loading. Moreover, this design algorithm takes into account of the effect of geometric nonlinearity as well as effect of warping. Also the displacement and stress constraints are included in the formulation of the design problem. The optimum design problem obtained turn out to be mixed integer and discrete programming problem. Artificial Bee Colony (ABC) algorithm is used to obtain its solution. This technique is a recent numerical optimization technique which mimics the intelligent behavior of honey bee swarm. The recent studies with the ABC method have shown its effectiveness and robustness in finding the optimum solution of combinatorial optimization problems. A design example is included to demonstrate the efficiency of the optimum design algorithm developed.

🔖

Cite This Article

ÇARBAŞ, S., SAKA, M. P. (2016). Optimum design of cold-formed thin-walled sections subjected to axial and bi-axial bending using artificial bee colony algorithm. Research on Engineering Structures and Materials, Cilt: 2 - Sayı: 1, 29–37. https://ajindex.com/articles/302670

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (8)

  1. www.epa.gov.tr/greenbuilding, accessed in October 2015. Jakab G. Analysis and Design of Cold-Formed C-Section Members and Structures. PhD Dissertation, Budapest University of Technology and Economics, Budapest, Hungary, 2009.
  2. Ghersi A, Landolfo R, Mazzolani FM. Design of metallic cold-formed thin-walled members, Spon Press, London and New York, 2005.
  3. Yu WW, La Boube RA. Cold-Formed Steel Design, 4th Edition,
  4. John Wiley, New Jersey, USA, 2010. http://dx.doi.org/10.1002/9780470949825 Vlasov VZ. Thin-walled elastic beams. National Science Foundation, Washington, USA, 1961. Zbirohowshi-Koscia K. Thin-walled beams. Crosby-Lockwood Ltd., London, UK, 1967.
  5. Trahair NS., Bild S. Elastic biaxial bending and torsion of thin-walled members. ThinWalled Structures, 1990; 9:269–307. http://dx.doi.org/10.1016/0263-8231(90)90049-5 Trahair NS. Lateral buckling strengths of steel angle sections beams. Journal of Structural Engineering, ASCE, 2003; 129(6):784-791. http://dx.doi.org/10.1061/(ASCE)0733-9445(2003)129:6(784)
  6. Aydogdu I, Saka MP. Ant colony optimization of irregular steel frames including elemental warping effect. Advances in Engineering Software, 2012; 44(1):150-169. http://dx.doi.org/10.1016/j.advengsoft.2011.05.029 Carbas S. Optimum Design of Low-Rise Steel Frames Made of Cold-Formed ThinWalled Sections. PhD Dissertation, Middle East Technical University, Ankara, Turkey, 2013.
  7. Saka MP, Geem ZW. Mathematical and metaheuristic applications in design optimization of steel frame structures: an extensive review, Mathematical Problems in Engineering, Hindawi Publishing Corporation, 2013. Karaboga D. Basturk B. A powerful and efficient algorithm for numerical function optimization: artificial bee colony (ABC) algorithm. Global Optimization, 2007; 39:459- 471. http://dx.doi.org/10.1007/s10898-007-9149-x
  8. Majid KI. Nonlinear Structures, Butterworth, London, UK, 1972. Ad Hoc Committee on Serviceability. Structural Serviceability: A critical appraisal and research needs. Journal of Structural Engineering, ASCE, 1986; 112(12):2646-2664. http://dx.doi.org/10.1061/(ASCE)0733-9445(1986)112:12(2646)