Journals / Research on Engineering Structures and Materials / 2018 / Cilt: 4 - Sayı: 3

Properties of furfural residue and its drying characteristics in single-shaft paddle heat exchangers

Pages
151–160
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

This preliminary experimental research provides reference for furfural residue drying unit design.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Furfural residue is a detrimental waste generated in furfural production processes.
📊
Key Findings & Data:The measurements show that the furfural residue contains high moisture (54.26%) and its as received basis lower heating value is 7301 kJ/kg.
💡
Conclusion & Impact:This preliminary experimental research provides reference for furfural residue drying unit design.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Özet

Furfural residue is a detrimental waste generated in furfural production processes. Combustion is an efficient way to dispose furfural residue and drying is a necessary unit operation prior to combustion. In this paper, the properties of furfural residue, including particle size distribution, proximate analysis and pyrolysis process curves were presented. The flow and drying characteristics of furfural residue in a lab-scale single-shaft paddle heat exchanger were documented. The measurements show that the furfural residue contains high moisture (54.26%) and its as received basis lower heating value is 7301 kJ/kg. The high moisture content in furfural residue makes ignition and efficient combustion very difficult. It is feasible to use single-shaft paddle heat exchanger to dry furfural residue to moisture content of 15.94% which is advantageous for further combustion due to low moisture content. No agglutination and blockage were found. This preliminary experimental research provides reference for furfural residue drying unit design.

🔖

Cite This Article

Jİ, L., LIU, X., ZHANG, H. (2018). Properties of furfural residue and its drying characteristics in single-shaft paddle heat exchangers. Research on Engineering Structures and Materials, Cilt: 4 - Sayı: 3, 151–160. https://ajindex.com/articles/302655

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Rong, C. Studies on Preparation of Furfural and Comprehensive Utilization of Furfural Residue (in Chinese), Ph.D. Dissertation, Jilin University, Changchun, China, 2005.
  2. Dai, L., Liu, B. Research progress on furfural residues recycling: a literature review, Proceedings of 2010 International Conference on Environmental Engineering and Applications, Singapore, September 10-12, 2010.
  3. Yin, Y., Li, A., Mao, L. Progress in utilization of furfural residue utilization technology (in Chinese), Modern Chemical Industry, 2011; 31: 22-24 and 26. Bie, R., Yang, L., Lu, H., Li, B., Bao, Y. Experimental study on furfural residue combustion in a fluidized bed (in Chinese), Acta Energiae Solaris Sinica, 2001;22: 291-295.
  4. Yang, Z. Experimental Studies on Furfural Residue Combustion in Fluidized Bed (in Chinese), Master Thesis, Northeast Dianli University, Jinlin, China, 2012.
  5. Li, H., Liu, J. Mechanism of bed material agglomeration during fluidized bed combustion of furfural residues, Journal of Xi’an Jiaotong University, 2015; 49: 145-150.
  6. Che, D. Boilers-Design and Operation, Xi’an Jiaotong University Press, Xi’an, China, 2008.
  7. Meng, X. Application of spin flash dryer in furfural residue drying (in Chinese), Chemical Equipment Technology, 1995; 16: 10-13.
  8. Gao, N., Li, A., Mao,L., Yang, J. Drying characteristics of the furfural residues of biomass hydrolyzation, Journal of Biobased Materials and Bioenergy, 2012; 6: 661-668. https://doi.org/10.1166/jbmb.2012.1294
  9. Arlabosse, P., Chavez, S., Lecomte, D. Method for thermal design of paddle dryers: application to municipal sewage sludge, Drying Technology, 2004; 22: 2375-2393. https://doi.org/10.1081/DRT-200040041
  10. Deng, W., Yan, J., Li, X., Wang, F., Lu, S., Chi, Y., Cen, K. Measurement and simulation of the contact drying of sewage sludge in a Nara-type paddle dryer based on batch experiments, Chemical Engineering Science, 2009; 64: 5117-5124. https://doi.org/10.1016/j.ces.2009.08.015
  11. Wang, W., Zhang, H., Liu, X. Research and application prospects of coal slime in paddle dryers (in Chinese), Industrial Boiler, 2015; 1: 34-36.
  12. Zhang, S., Liu, X., Yang, G., Zhang, H. Drying characteristics of fine-particle lignite in paddle dryers, Defect and Diffusion Forum, 2016; 366: 192-198. https://doi.org/10.4028/www.scientific.net/DDF.366.192
  13. Ding, J., Liu, X., Zhang, H. The calculation and analysis of heat transfer Characteristics of coal slime drying process in single-shaft paddle dryer (in Chinese), Energy Research and Utilization, 2016