Journals / Mugla Journal of Science and Technology / 2020 / Cilt: 6 - Sayı: 1

UTILIZATION OF MUĞLA FLY ASH AND QUARTZ DUST IN ENGINEERED CEMENTITIOUS COMPOSITES PRODUCTION AT HIGH VOLUMES

Pages
63–71
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Mechanical strength values and self-healing properties of the specimens were investigated at the scope of the study.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Concrete, because of its brittle nature, is very prone to cracking especially under induced tensile stresses.
📊
Key Findings & Data:Water penetrating through the cracks yields various durability issues that shorten the service life of the concrete.
💡
Conclusion & Impact:Mechanical strength values and self-healing properties of the specimens were investigated at the scope of the study.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Engineered Cementitious Composites (ECC) · Fiber Reinforced High Performance Cementitious Composites · Self-Healing

Abstract

Concrete, because of its brittle nature, is very prone to cracking especially under induced tensile stresses. Those cracks make the material vulnerable to external influences. Water penetrating through the cracks yields various durability issues that shorten the service life of the concrete. However, contrary to ordinary concrete, in Engineered Cementitious Composites (ECC) formation of multiple and tight micro-cracks under loading yields to high ductility, energy absorption capacity and durability. Besides, these tiny cracks also exhibit self-healing properties with the help of a high amount of binding materials available in composite composition. Within the scope of this study, in the design of the ECC, two different mixtures with low and high fly ash amounts were produce. Furthermore, waste materials of the Muğla region which cause environmental pollution and have little or no commercial value were used in ECC production. Mechanical strength values and self-healing properties of the specimens were investigated at the scope of the study.

🔖

Cite This Article

KESKİN, S. B., TAŞ, O. İ., KESKİN, Ö. K. (2020). UTILIZATION OF MUĞLA FLY ASH AND QUARTZ DUST IN ENGINEERED CEMENTITIOUS COMPOSITES PRODUCTION AT HIGH VOLUMES. Mugla Journal of Science and Technology, Cilt: 6 - Sayı: 1, 63–71. https://ajindex.com/articles/294028

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (1)

  1. Gohil, B.D. and Parikh K.B. (2016) Study on Engineered Cementitious Composites with Different Fibres: A Critical Review, Int J Inno Eng Technol, 6: 366-370 [2] Deshpande, U.L. and Murnal P.B. (2016) Ductile Concrete Using Engineered Cementitious Composites, Int. J. Eng. Res. Sci., 5: 756-760 [3] Keskin, S.B., Sahmaran, M., Yaman, I.O. and Lachemi, M. (2014) Correlation between the viscoelastic properties and cracking potential of engineered cementitious composites, Constr Build Mater, 71: 375-383 [4] Sahmaran, M., Yildirim G. and Erdem T.K. (2013) Self-healing capability of cementitious composites incorporating different supplementary cementitious materials, Cem Concr Compos, 35: 89-101 [5] Bentur, A. and Mindess S. (2007) Fiber Reinforced Cementitious Composites, 2nd Ed., Taylor & Francis, New York, 625 [6] Mauney, M. “History of Asbestos” Date of access: 7.2.2018,https://www.asbestos.com/asbestos/history/ [7] Mobasher, B. and Yu Li, C., (1996) Mechanical properties of hybrid cement-based composites, ACI Mater J, May-June, 284-287 [8] Beglarigale, A. and Yazıcı, H. (2015) Çimento Esaslı Kompozzitlerde Lif matris Aderansına Kür Koşullarının Etkisinin İncelenmesi, 9. Ulusal Beton Kongresi, 13 December 2016, Antalya, 517-526 [9] Brandt, A.M. (2009) Concrete like composites, 39-42, Cement-based Composites: Materials, Mechanical Properties and Performance, Taylor & Francis, New York [10] Khan, M.I., Abbas, Y.M. and Fares G. (2017) Review of high and ultrahigh performance cementitious composites incorporating various combinations of fibers and ultra-fines, J King Saud Univ Sci– Engineering Sciences [11] Song, G. (2005) Matrix Manipulation to Study ECC Behaviour, MSc Thesis, University of Stellenbosch [12] Zhang, Q. and Li, V.C. (2014) Adhesive bonding of fire-resistive engineered cementitious composites (ECC) to steel, Constr Build Mater, 64: 431–439 [13] Yang, E.H., Yang, Y. and Li, V. (2007) Use of High Volumes of Fly Ash to Improve ECC Mechanical Properties and Material Greenness, ACI Mater J, Title no. 104-M68, 303-311 [14] Merchant, B. and Gelot, A. (2015) Evaluation of engineering cementitious composites (ECC) with different percentage of fibers, Int. J. of Eng. Res. Technol., 4: 40-43 [15] Akkari, A. (2011) Evaluation of a Polyvinyl Alcohol Fiber Reinforced Engineered Cementitious Composite for a Thin-Bonded Pavement Overlay, Minnesota Dep. of Transportation, Research Project Final Report 2011-11 [16] Li, V.C. (2008) Engineered Cementitious Composite