SavedAdd your journal

Journals / Mugla Journal of Science and Technology / 2020 / Cilt: 6 - Sayı: 2

SELF-COMPACTING MORTAR PRODUCTION BY USING CALCIUM ALUMINATE CEMENT

Gizem TÜREDİ
Özlem KASAP KESKİN
Süleyman Bahadır KESKİN
Pages
18–27
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

Test results showed that different supplementary binders exhibited different behaviors in mortar mixtures.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:The aim of this study is to produce self-compacting mortar with calcium aluminate cement.
📊
Key Findings & Data:In this sense, 11 different self-compacting mortars were produced, and those mortars were tested to obtain values of mini slump flow, setting time, abrasion resistance and 1, 2, 7, 28, and 90 day flexural and compressive strength.
💡
Conclusion & Impact:Test results showed that different supplementary binders exhibited different behaviors in mortar mixtures.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Calcium Aluminate Cement · Self-compacting Mortar · Mortar Production

Abstract

The aim of this study is to produce self-compacting mortar with calcium aluminate cement. The advantages of self-compacting mortars like filling and passing ability without the need of vibration process and the superior properties of calcium aluminate cement like abrasion resistance, high thermal resistance, high acid resistance, and high early strength are intended to be combined. However, hydration process of calcium aluminate cement might cause strength reduction at later ages. Therefore, in order to prevent the possibility of strength reduction, several supplementary binders such as gypsum, fly ash, ground granulated blast furnace slag and silica fume were utilized in the mortar mixtures. In this sense, 11 different self-compacting mortars were produced, and those mortars were tested to obtain values of mini slump flow, setting time, abrasion resistance and 1, 2, 7, 28, and 90 day flexural and compressive strength. Test results showed that different supplementary binders exhibited different behaviors in mortar mixtures. As a conclusion, it was seen that the production of self-compacting mortar with calcium aluminate cement was possible.

🔖

Cite This Article

TÜREDİ, G., KESKİN, Ö. K., KESKİN, S. B. (2020). SELF-COMPACTING MORTAR PRODUCTION BY USING CALCIUM ALUMINATE CEMENT. Mugla Journal of Science and Technology, Cilt: 6 - Sayı: 2, 18–27. https://ajindex.com/articles/340982

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. Nunes, S. and Costa, C., "Numerical Optimization of self-compacting mortar mixture containing spent equilibrium catalyst from oil refinery", Journal of Cleaner Production, 158: 109-121, 2017
  2. Tuaum, A., Shiote, S.M. and Oyaawa, W., "Experimental study of self-compacting mortar incorporating recycled glass aggregate", Buildings, 8(2): 1-15, 2018
  3. Navarro-Blasco, I., Fernandez, J.M., Duran A., Sirera, R. and Alvarez, J.I., “A novel use of calcium aluminate cements for recycling waste foundry sand (WFS)”, Construction and Building Materials, 48: 218-228, 2013
  4. Garces, P., Zornoza, E., Alcocel, E.G., Galao, O. and Andion, L.G., “Mechanical properties and corrosion of CAC mortars with carbon fibers”, Construction and Building Materials, 34: 91-96, 2012
  5. Maaroufi, M., Lecomte, A., Diliberto, C., Francy, O. and Le Brun, P., "Thermo-hydrous behavior of hardened cement paste based on calcium aluminate cement", Journal of the European Ceramic Society, 35: 1637-1646, 2014
  6. Luz, A.P. and Pandolfelli, V.C., "Halting the calcium aluminate cement hydration process", Ceramics International, 37: 3789-3793, 2011
  7. Silva, A.P., Segades, A.M., Pinto, D.G., Oliveira, L.A. and Devezas, T.C., "Effect of particle size distribution and calcium aluminate cement on the rheological behaviour of all-alumina refractory castables", Powder Technology, 226: 107-113, 2012
  8. Antonovic, V., Keriene, J., Boris R. and Aleknevicius M., "The Effect of Temperature on the Formation of the Hydrated Calcium Aluminate Cement Structure", Procedia Engineering, 57: 99-106, 2013
  9. Damidot, D. and Rettel, A., “Effect of Gypsum on CA and C12A7 Hydration at Room Temperature”, 11th International Congress on the Chemistry of Cement, 2003, 0-9584085-8-0
  10. Fernandez-Carrasco, L. and Vazquez, E., "Reactions of fly ash with calcium aluminate cement and calcium sulphate", Fuel, 88: 1533-1538, 2009
  11. Lopez, A.H., Calvo, J.L.G., Olmo, J.G., Petit, S. and Alonso, M.C., “Microstructural Evolution of Calcium Aluminate Cements Hydration with Silica Fume and Fly Ash Additions by Scanning Electron Microscopy, and Mid and Near-Infrared Spectroscopy”, The American Ceramic Society, 91 [4] 1258-1265, 2008
  12. Parr, C., Bin, L., Alt, C. and Wohrmeyer, C., “Interactions between silica fume and cac and methods to optimize castable placing properties”, Refractories Applications and News, 1: 12-18, 2007
  13. Tanzer, R., Buchwald, A. and Stephan, D., “Effect of slag chemistry on the hydra