Journals / Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi / 2018 / Cilt: 7 - Sayı: 1

EFFECT OF COAGULANTS AND FLOCCULANTS ON DEWATERING OF KAOLIN SUSPENSIONS

KAOLEN SÜSPANSİYONLARININ SUSUZLAŞTIRILMASINDA KOAGÜLANT VE FLOKÜLANTLARIN ETKİSİ

Pages
297–305
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

The highest sedimentation efficiency (94%) was achieved with anionic flocculants and the same sedimentation velocity (58 mm/min) was reached with all flocculants.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:Kaolin tailings are commonly generated in the mineral industry.
📊
Key Findings & Data:In experimental studies, Al2(SO4)3, FeCl3, MgCl2, CaCl2, NaCl were used as coagulant, while as flocculant anionic (A150), cationic (C521) and nonionic (N100) polymers were used.
💡
Conclusion & Impact:The highest sedimentation efficiency (94%) was achieved with anionic flocculants and the same sedimentation velocity (58 mm/min) was reached with all flocculants.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Kaolen · susuzlaştırma · polimer

Abstract

Kaolin tailings are commonly generated in the mineral industry. They are invariably negatively charged and consequently tend to form stable dispersions with poor flocculation characteristics. Coagulation–flocculation treatments are suitable methods for removing colloidal particles from wastewater. In this study, the effects of mono/multivalent ions (coagulants) and polymers (flocculants) on the sedimentation and electrokinetic behaviours of kaolin have been investigated. In experimental studies, Al2(SO4)3, FeCl3, MgCl2, CaCl2, NaCl were used as coagulant, while as flocculant anionic (A150), cationic (C521) and nonionic (N100) polymers were used. Isoelectric point of kaolin was determined as pH 4.2. The effectiveness of coagulants increased with the increase in the ionicity degree of the metal ions. Among the coagulants, FeCl3 provided the highest efficiency (91%). Low sedimentation velocities (6.3-12.2 mm/min) were obtained with coagulants. The highest sedimentation efficiency (94%) was achieved with anionic flocculants and the same sedimentation velocity (58 mm/min) was reached with all flocculants.

Özet

Kaolin atıkları mineral endüstrisinde yaygın olarak üretilir. Negatif yüklü olan bu atıklar zayıf flokülasyon özelliklerine sahip kararlı dağılımlar oluşturmaya eğilimlidirler. Koagülasyon-flokülasyon işlemleri, koloidal parçacıkları atık sulardan uzaklaştırmak için uygun yöntemlerdir. Bu çalışmada, mono/multivalent iyonların (koagülant) ve polimerlerin (flokülant) kaolenin çökelme ve elektrokinetik davranışlarına etkisi araştırılmıştır. Deneysel çalışmalarda, koagülant olarak Al2(SO4)3, FeCl3, MgCl2, CaCl2, NaCl ve flokülant olarak, anyonik (A150), katyonik (C521) ve noniyonik (N100) polimerler kullanılmıştır. Kaolenin sıfır yük noktası pH 4.2 olarak belirlenmiştir. Koagülantların etkinliği, metal iyonlarının iyoniklik derecesinin artması ile artmıştır. Koagülantlar arasında FeCl3 en yüksek verimi (%91) sağlamıştır. Koagülantlar ile düşük sedimantasyon hızları (6.3-12.2 mm/dk) elde edilmiştir. En yüksek sedimantasyon verimliliği (%94) anyonik flokülant ile sağlanmış ve tüm flokülantlar ile yaklaşık olarak aynı çökelme hızına (58 mm/dk) ulaşılmıştır.

🔖

Cite This Article

ÖNEN, V., GÖÇER, M., TANER, H. A. (2018). EFFECT OF COAGULANTS AND FLOCCULANTS ON DEWATERING OF KAOLIN SUSPENSIONS. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 7 - Sayı: 1, 297–305. https://ajindex.com/articles/290298

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (13)

  1. MPOFU, P., ADDAI-MENSAH, J., RALSTON, J., “Investigation of the Effect of the Polymer Structure Type on Flocculation Rheology and Dewatering Behaviour of Kaolinite Dispersions”, International Journal of Mineral Processing, 71, 247-268, 2003
  2. NASSER, M.S., JAMES, A.E., “Effect of Polyacrylamide Polymers on Floc Size and Rheological Behaviour of Kaolinite Suspensions”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 301, 311–322, 2007
  3. NASIM, T., PAL, A., GIRI, A., GOSWAMI, L., BANDYOPADHYAY, A., “Exploring Polyelectrolytic Features of the Exudate from Native Acacia Nilotica for Flocculating Aqueous Kaolin Suspension”, Separation and Purification Technology, 131, 50–59, 2014
  4. NASSER, M.S., JAMES, A.E., “The Effect of Polyacrylamide Charge Density and Molecular Weight on the Flocculation and Sedimentation Behaviour of Kaolinite Suspensions”, Separation and purification Technology, 52, 241-252, 2006
  5. ADDAI-MENSAH, J., “Enhanced Flocculation and Dewatering of Clay Mineral Dispersions”, Powder Technology, 179, 73-78, 2007
  6. LEE, K.E., MORAD, N., POH, B.T., TENG, T.T., “Comparative Study on the Effectiveness of Hydrophobically Modified Cationic Polyacrylamide Groups in the Flocculation of Kaolin”, Desalination, 270, 206–213, 2011
  7. GLOVER, S.M., YAN, Y., JAMESON, G.J., BIGGS, S., “Dewatering Properties of Dual-Polymer-Flocculated Systems”, International Journal of Mineral Processing, 73, 145-160, 2004
  8. OWEN, A.T., FOWEL, P.D., SWIFT, J.D., “The Impact of Polyacrylamide Flocculant Solution Age on Flocculation Performance”, International Journal of Mineral Processing, 67, 123 – 144, 2002
  9. GREGORY, J., BARANY, S., “Adsorption and Flocculation by Polymers and Polymer Mixtures”, Advances in Colloid and Interface Science, 169, 1-12, 2011
  10. LU, Q., YAN, B., XIE, L., HUANG, J., LIUB, Y., ZENG H., “A Two-Step Flocculation Process on Oil Sands Tailings Treatment Using Oppositely Charged Polymer Flocculants”, Science of the Total Environment, 565, 369–375, 2016
  11. DRYABINA, S., FOTINA, K., NAVROTSKII, A., NOVAKOV, I., “The Flocculation of Kaolin Aqueous Dispersion by Two Cationic Polyelectrolites”, Colloids and Surfaces A: Physicochemical and Engineering Aspects, 515, 12-21, 2017
  12. LEE, C.S., ROBINSON, J., CHONG, M.F., “A Review on Application of Flocculants in Wastewater Treatment”, Process Safety and Environmental Protection, 92, 489-508, 2014
  13. DUC, M., GABORIAUD, F., THOMAS, F., “Sensitivity of the Acid–