Journals / Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi / 2020 / Cilt: 9 - Sayı: 2

PLASTIC COMPOSITE EQUIPMENT USING IN STRENGTHENING WALLS

DUVARLARIN GÜÇLENDİRİLMESİNDE PLASTİK KOMPOZİT DONATI KULLANIMI

Pages
946–955
DOI
—
🏛️Bibliographic metadata and full text access for this article are provided via DergiPark.
DergiPark Record ↗
✨

AI Summary & Key Takeaways

AI Insight
⚡ TL;DR(Too Long; Didn't Read)

It was found that the walls using plastic composite reinforcement gave much better results in terms of both load and displacement than the witness sample.

📌 3 Key Takeaways

🎯
Objective & Hypothesis:In this study, the effect of using plastic composite reinforcement to strengthen for the walls in the existing structures in our country and in the world was investigated.
📊
Key Findings & Data:A total of 5 staggered brick walls were built in the dimensions of 80 * 80 cm.
💡
Conclusion & Impact:It was found that the walls using plastic composite reinforcement gave much better results in terms of both load and displacement than the witness sample.
🔬Design:Research Article
📍Scope:Comprehensive Sample
⚙️Variables:Domain Parameters

Abstract

In this study, the effect of using plastic composite reinforcement to strengthen for the walls in the existing structures in our country and in the world was investigated. Many different methods have been used to strengthen the walls until today. The methods used give mostly positive results, but in the materials used for reinforcement; problems such as being expensive, not easily accessible, difficult to work and being heavy. When the positive effects of reinforcement and the problems experienced are evaluated; The 'plastic composite reinforcement', which is known as floor material, which is used as reinforcement in structures such as floor reinforcement and retaining walls, was used in the reinforcement of brick walls in this study. In the experimental studies, brick walls were discussed. A total of 5 staggered brick walls were built in the dimensions of 80 * 80 cm. One of the brick walls built for reinforcement was compared with 1 plain, 2 single sides and 2 double sides reinforced. Diagonal loading tests were carried out on the prepared walls in a laboratory environment and load-displacement curves were created. It was found that the walls using plastic composite reinforcement gave much better results in terms of both load and displacement than the witness sample. It has been observed that the application of plastic composite reinforcement on both sides and on one side is a parameter affecting the results.

Özet

Bu çalışmada, ülkemizdeki ve dünyadaki mevcut yapıların olası deprem vb. afetlerde duvarların güçlendirilmesi amacıyla plastik kompozit donatı kullanılmasının etkisi araştırılmıştır. Duvarları güçlendirmek için günümüze kadar birçok farklı yöntem kullanılmıştır. Kullanılan yöntemler çoğunlukla olumlu sonuçlar vermektedir ancak güçlendirme için kullanılan malzemelerde genellikle; pahalı olması, kolay erişilebilir olmaması, işçiliği zor olması, ağır olması gibi sıkıntılarla karşılaşılmaktadır. Güçlendirmenin pozitif etkileri ve yaşanan sıkıntılar değerlendirildiğinde; zemin güçlendirilmesi, istinat duvarları gibi yapılarda donatı olarak kullanılan aslında zemin malzemesi olarak bilinen ‘plastik kompozit donatı’ bu çalışmada duvarların güçlendirilmesinde kullanılmıştır. Deneysel çalışmalarda tuğla duvarlar ele alınmıştır. 80*80 cm boyutlarında toplam 5 adet şaşırtmalı tuğla duvar örülmüştür. Güçlendirme amacıyla örülen tuğla duvarlardan 1 adedi yalın, 2 adedi tek yüzü, 2 adedi de çift yüzü güçlendirilerek kıyaslanmıştır. Hazırlanan duvarlara laboratuvar ortamında diyagonal yükleme deneyleri yapılmıştır ve yük-deplasman eğrileri oluşturulmuştur. Deney sonuçlarında plastik kompozit donatı kullanılan duvarların, şahit numuneye göre hem yük hem de deplasman açısından çok daha iyi sonuçlar verdiği görülmüştür. Duvarlarda plastik kompozit donatının çift yüze ve tek yüze uygulanmasının da sonuçlara etki eden bir parametre olduğu gözlemlenmiştir.

🔖

Cite This Article

KAÇIN, S., GÜNEŞ, E. (2020). PLASTIC COMPOSITE EQUIPMENT USING IN STRENGTHENING WALLS. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 9 - Sayı: 2, 946–955. https://ajindex.com/articles/290097

📄 Full Text PDF Viewer

📄

PDF görüntüleyici hazırlanıyor...

References (12)

  1. Triantafillou, T. C., “Strengthening of Masonry Structures Using Epoxy- Bonded FRP Laminates”, Journal of Composites for Construction,107-115, May 1998
  2. Ilki, A., Ispir, M., As, F., Demir, C. ve Kumbasar, N., “FRP Retrofit of Walls Constructed with Historical Bricks”, Challenges for Civil Construction Torres Marques et al.(Eds), FEUP, 2008
  3. Vandergrift, J., Gergely, J. and Young, D.T., “CFRP Rertrofit of Masonary Walls”, Proceedings of the Third International Conference on Composites in Infrastructure ICCI 02, San Francisco, CA, USA, 2002
  4. Coza, H., “Dolgu duvarlı betonarme çerçevelerin karbon lifli kompozitlerle güçlendirilmesi”, İstanbul Teknik Üniversitesi Fen Bilimleri Enstitüsü, Doktora Tezi, İstanbul, 18, Ocak 2009
  5. Prota, A., Marcari, G., Fabbrocino, G., Manfredi, G. and Aldea, C. (2006).,“Experimental In-Plane Behavior of Tuff Masonry Strengthened with Cementitous Matrix-Grid Composites”, Journal of Composites for Consturction, May/June 2006, pp 223-233
  6. Papanicolaou, C. G., Triantafillou, T. C., Karlos, K., Papathanasiou, M., “Textile-reinforced mortar (TRM) versus FRP as strengthening material of URM walls: in-plane cyclic loading”, Materials and Structures, 40(10): 1081-1097 (2007)
  7. Binici, B., Özcebe, G. ve Özçelik, R., ‘‘Analysis and design of FRP composites for seismic retrofit of infill walls in reinforced concrete frames’’, Composites: Part B, Cilt 38, 575-583, 2007
  8. Öztaş, V., “Yığma yapıların güçlendirilmesi ve bir yığma yapı örneğinde güçlendirme analizi”, İstanbul Teknik Üniversitesi Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, İstanbul, 74, Ocak 2009
  9. Elgawady, M. A., Lestuzzi, P. ve Badoux, M., “Retrofitting of Masonry Walls Using Shotcrete”, Proceedings of 2006 New Zealand Society for Earthquake Engineering Conference, Napier, New Zealand, 45-53, 2006
  10. Sevil, T., Baran M., Bilir T. ve Canbay E., “Tuğla dolgu duvarların b/a çerçeveli yapıların davranışına etkilerinin incelenmesi; deneysel ve kuramsal çalışmalar”, International Journal of Engineering Research and Development, Vol.2, No.2, June 2010
  11. Cumhur, A., Altundal, A., Kalkan, İ., Aykaç, S., “Genişletilmiş Çelik Levhalarla Güçlendirilmiş Yatay Boşluklu Tuğla Duvarların Davranışı”, 6. Çelik Yapılar Sempozyumu, Eskişehir, 15-17 Ekim, 2015
  12. Taghdi, M., Bruneau, M. ve Saatcioglu, M., “Seismic Retrofitting of Low-Rise Masonary and Concrete Walls Using Steel Strips”, ASCE Journal of Structural Engineering, 126:1017- 1025, 2000